1. SERVICE CENTER
FACILITIES

2. SERVICE CENTER FACILITIES
2 CUT-TO-LENGTH LINES
SLITTING LINE
POLISHING LINE FOR COILS
POLISHING LINE FOR SHEETS
2 LASER CUTTING MACHINES
SHEAR
2 POLISHING LINES FOR ROUND TUBES
POLISHING LINE FOR SQUARE AND RECTANGULAR TUBES

3. CUT-TO-LENGTH LINE – No 1
December 2005
COILS
THICKNESS: mm
WIDTH: mm
WEIGHT: max 25 T
MILL EDGE
SHEETS
LENGTH: mm
WIDTH CORRECTION
TOLERANCES:
EN ISO 9445 – for cold rolled sheets, EN ISO 9444 – for hot rolled sheets

4. CUT-TO-LENGTH LINE – No 2
June 2012
SHEETS
LENGTH:
500 – 6,000 mm in “automatic mode” (automatic sheet discharge); 
500 – 10,000 mm in “manual mode” (manual sheet discharge)
TOLERANCES:
EN ISO 9445 – for cold rolled sheets,
EN ISO 9444 – for hot rolled sheets
COILS
THICKNESS: 1.0 – 10.0 mm
WIDTH: mm
WEIGHT: max 30 T
no reduction of input coil width

5. SLITTING LINE COILS STRIPS thickness: 0.3- 4.0 mm width: 50 – 1600 mm
FEBRUARY 2008
COILS
thickness: mm
width: 50 – 1600 mm
inside diameter of a coil: 508 or 610 mm
outside diameter of a coil: mm
STRIPS
width - up to thickness 1.5 mm>18 mm; more than 1.5 mm>28 mm
Outside and inside diameter – as above
Tolerances – EN ISO 9445

6. POLISHING LINE FOR COILS
APRIL 2009
WIDTH OF COILS – mm
WEIGHT OF A COIL – max 20 ton
THICKNESS – mm
SPEED OF WORK – 25 m/min
SURFACE: dry brush, imitation of wet polish, duplo

7. POLISHING LINE FOR SHEETS
August 2003
DRY PROCESSING MACHINERY
2 GRINDING HEADS
3 SCOTCH BRITE HEADS
SHEET BY SHEET FEEDING SYSTEM
SHEETS
THICKNESS: mm
LENGTH: 6000 mm
WIDTH: 1600 mm
GRIT: 80,120,180,240,320,400, DB

8. 2 LASER CUTTING MACHINES 2D Trumpf
MARCH 2010, FEBRUARY 2012
Thickness of sheets
Stainless steel up to 15 mm
Aluminium up to 10 mm
Work table dimensions 1500 x 3000 mm
Tolerance – EN ISO 9013

9. SHEAR LVD THICKNESS: 0.5 – 4.5 mm WIDTH: up to 3100 mm
FEBRUARY 2013
THICKNESS: 0.5 – 4.5 mm
WIDTH: up to 3100 mm
LENGTH: up to 6000 mm
TOLERANCES
EN ISO 9445 – for cold rolled sheets, EN ISO 9444 – for hot rolled sheets

10. BENDING OF SHEETS LVD BENDING PRESS
JANUARY 2015
LVD BENDING PRESS
Bending of stainless steel and aluminium sheets with thickness up to 8 mm*
Working length 3050 mm
220 tons pressing force
8-axis CNC positioning
Laser bend angle measurement
Table camber compensation CNC crowning
High quality machine tooling for stainless steel/aluminium sheets
*available depth thickness depends on overall workpiece dimensions

11. 2 POLISHING LINES FOR ROUND TUBES
June 2007
8 POLISHING HEADS
DIAMETER OF TUBES mm
SPEED UP TO 12 m/min

12. POLISHING LINE FOR SQUARE AND RECTANGULAR TUBES, FLATBARS
GRIT: 80,120,180,240,320,400,600,800,1000
POLISHING
SIZES
SQUARE TUBES: from 20x20 to 120x120 mm
RECTANGULAR TUBES: from 20x10 to 80x120 mm
FLATBARS
THICKNESS – 6-20 mm
MAX WIDTH – 120 mm

13. Thank you for your attention