1. CPE 631: Multithreading: Thread-Level Parallelism Within a Processor Electrical and Computer Engineering University of Alabama in Huntsville Aleksandar Milenkovic milenka@ece.uah.edu milenka@ece.uah.edu http://www.ece.uah.edu/~milenka

2.  AM LaCASALaCASA 2 Outline Trends in microarchitecture Exploiting thread-level parallelism Exploiting TLP within a processor Resource sharing Performance implications Design challenges Intel’s HT technology

3.  AM LaCASALaCASA 3 Trends in microarchitecture Higher clock speeds To achieve high clock frequency make pipeline deeper (superpipelining) Events that disrupt pipeline (branch mispredictions, cache misses, etc) become very expensive in terms of lost clock cycles ILP: Instruction Level Parallelism Extract parallelism in a single program Superscalar processors have multiple execution units working in parallel Challenge to find enough instructions that can be executed concurrently Out-of-order execution => instructions are sent to execution units based on instruction dependencies rather than program order

4.  AM LaCASALaCASA 4 Trends in microarchitecture Cache hierarchies Processor-memory speed gap Use caches to reduce memory latency Multiple levels of caches: smaller and faster closer to the processor core Thread-level Parallelism Multiple programs execute concurrently Web-servers have an abundance of software threads Users: surfing the web, listening to music, encoding/decoding video streams, etc.

5.  AM LaCASALaCASA 5 Exploiting thread-level parallelism CMP – Chip Multiprocessing Multiple processors, each with a full set of architectural resources, reside on the same die Processors may share an on-chip cache or each can have its own cache Examples: HP Mako, IBM Power4 Challenges: Power, Die area (cost) Time-slice multithreading Processor switches between software threads after a predefined time slice Can minimize the effects of long lasting events Still, some execution slots are wasted

6.  AM LaCASALaCASA 6 Multithreading Within a Processor Until now, we have executed multiple threads of an application on different processors – can multiple threads execute concurrently on the same processor? Why is this desireable? inexpensive – one CPU, no external interconnects no remote or coherence misses (more capacity misses) Why does this make sense? most processors can’t find enough work – peak IPC is 6, average IPC is 1.5! threads can share resources  we can increase threads without a corresponding linear increase in area

7.  AM LaCASALaCASA 7 What Resources are Shared? Multiple threads are simultaneously active (in other words, a new thread can start without a context switch) For correctness, each thread needs its own PC, its own logical regs (and its own mapping from logical to phys regs) For performance, each thread could have its own ROB (so that a stall in one thread does not stall commit in other threads), I-cache, branch predictor, D-cache, etc. (for low interference), although note that more sharing  better utilization of resources Each additional thread costs a PC, rename table, and ROB – cheap!

8.  AM LaCASALaCASA 8 Approaches to Multithreading Within a Processor Fine-grained multithreading: switches threads on every clock cycle Pro: hide latency of from both short and long stalls Con: Slows down execution of the individual threads ready to go Course-grained multithreading: switches threads only on costly stalls (e.g., L2 stalls) Pros: no switching each clock cycle, no slow down for ready-to-go threads Con: limitations in hiding shorter stalls Simultaneous Multithreading: exploits TLP at the same time it exploits ILP

9.  AM LaCASALaCASA 9 How Resources are Shared? Each box represents an issue slot for a functional unit. Peak thruput is 4 IPC. Superscalar processor has high under-utilization – not enough work every cycle, especially when there is a cache miss Fine-grained multithreading can only issue instructions from a single thread in a cycle – can not find max work every cycle, but cache misses can be tolerated Simultaneous multithreading can issue instructions from any thread every cycle – has the highest probability of finding work for every issue slot Fine-Grained Multithreading Simultaneous Multithreading Thread 1 Thread 2 Thread 3 Thread 4 Idle Cycles Superscalar Coarse-grained Multithreading

10.  AM LaCASALaCASA 10 R1  R1 + R2 R3  R1 + R4 R5  R1 + R3 R2  R1 + R2 R5  R1 + R2 R3  R5 + R3 P73  P1 + P2 P74  P73 + P4 P75  P73 + P74 P76  P33 + P34 P77  P33 + P76 P78  P77 + P35 P73  P1 + P2 P74  P73 + P4 P75  P73 + P74 P76  P33 + P34 P77  P33 + P76 P78  P77 + P35 FU Instr Fetch Instr Rename Issue Queue Register File Thread-1 Thread-2 Resource Sharing

11.  AM LaCASALaCASA 11 Performance Implications of SMT Single thread performance is likely to go down (caches, branch predictors, registers, etc. are shared) – this effect can be mitigated by trying to prioritize one thread While fetching instructions, thread priority can dramatically influence total throughput – a widely accepted heuristic (ICOUNT): fetch such that each thread has an equal share of processor resources With eight threads in a processor with many resources, SMT yields throughput improvements of roughly 2-4 Alpha 21464 and Intel Pentium 4 are examples of SMT

12.  AM LaCASALaCASA 12 Design Challenges How many threads? Many to find enough parallelism However, mixing many threads will compromise execution of individual threads Processor front-end (instruction fetch) Fetch as far as possible in a single thread (to maximize thread performance) However, this limits the number of instructions available for scheduling from other threads Larger register files (multiple contexts) Minimize clock cycle time Cache conflicts

13.  AM LaCASALaCASA 13 Pentium 4: Hyperthreading architecture One physical processor appears as multiple logical processors HT implementation on NetBurst microarchitecture has 2 logical processors Architectural State Processor execution resources Architectural state: - general purpose registers - control registers - APIC: advanced programmable interrupt controller

14.  AM LaCASALaCASA 14 Pentium 4: Hyperthreading architecture Main processor resources are shared caches, branch predictors, execution units, buses, control logic Duplicated resources register alias tables (map the architectural registers to physical rename registers) next instruction pointer and associated control logic return stack pointer instruction streaming buffer and trace cache fill buffers

15.  AM LaCASALaCASA 15 Pentium 4: Die Size and Complexity

16.  AM LaCASALaCASA 16 Pentium 4: Resources sharing schemes Partition – dedicate equal resources to each logical processors Good when expect high utilization and somewhat unpredicatable Threshold – flexible resource sharing with a limit on maximum resource usage Good for small resources with bursty utilization and when the micro-ops stay in the structure for short predictable periods Full sharing – flexible with no limits Good for large structures, with variable working-set sizes

17.  AM LaCASALaCASA 17 Pentium 4: Shared vs. partitioned queues shared partitioned

18.  AM LaCASALaCASA 18 NetBurst Pipeline partitioned threshold

19.  AM LaCASALaCASA 19 Pentium 4: Shared vs. partitioned resources Partitioned E.g., major pipeline queues Threshold Puts a threshold on the number of resource entries a logical processor can have E.g., scheduler Fully shared resources E.g., caches Modest interference Benefit if we have shared code and/or data

20.  AM LaCASALaCASA 20 Pentium 4: Scheduler occupancy

21.  AM LaCASALaCASA 21 Pentium 4: Shared vs. partitioned cache

22.  AM LaCASALaCASA 22 Pentium 4: Performance Improvements

23.  AM LaCASALaCASA 23 Multi-Programmed Speedup