1. Ray Optics: Reflection and Refraction 10.1

2. Rays Representation of the path that light follows Represent beams of light that are composed of millions of light photons traveling together

3. Reflection When a light ray strikes the surface of a material and some of the light bounces off the surface

4. Reflection Normal line –Perpendicular to the surface at the point of reflection Angle of incidence –The angle between the incoming light ray and the normal line Angle of reflection –The angle between the normal line and the reflected ray.

5. Reflection The angle of incidence is always equal to the angle of reflection

6. Reflection Flat mirrors –Plane mirrors –Produces an image that is reversed and appears to be located the same distance behind the mirror as the object is in front of the mirror

7. Reflection Spherical mirrors –Convex Outside surface (back) of a spoon –Concave Inside surface (front) of a spoon

8. Reflection Focal Point of a Flat Mirror –The point in front of the mirror at which the reflected rays all meet Spherical mirrors or lenses do not have exact focal points. –Focal point of a concave mirror is in front of the mirror –Focal point of a convex mirror is behind the mirror

9. Reflection Real image –Formed by a mirror or lens when light rays from the object converge. It can be seen by placing a screen or piece of paper at the point at which the light from the object converges. Virtual image –Apparently causes light to diverge from a mirror or lens. It cannot be seen on a screen or piece of paper since no light actually converges at the image location.

10. Refraction The change in direction of a wave or photon of light as it crosses a boundary into a different medium Index of refraction is the ratio of the speed of light in a vacuum to the speed of light in the material

11. Total Internal Reflection When the angle of refraction is greater than 90º, a light ray is reflected. Optical fibers –Light stays in the fiber because each interaction of the light bouncing off the side is reflected

12. Lenses A carefully ground or molded piece of transparent material Convex lens—thicker at its center than at its edges (converging) Concave lens— thinner at its center than at its edges (diverging)