LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated.

Name: LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated.
Uploaded: 2017-10-07T16:01:49+00:00
Duration: PTM36S53
Channel: Laurel Hart
Description: LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated.

LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated purity of a substance. (Sec 5.5, 5.7) LO 1.4 The student is able to connect the number of particles, moles, mass, and volume of substances to one another, both qualitatively and quantitatively. (Sec ) LO 2.4 The student is able to use KMT and concepts of intermolecular forces to make predictions about the macroscopic properties of gases, including both ideal and nonideal behavior. (Sec , 5.6) LO 2.5 The student is able to refine multiple representations of a sample of matter in the gas phase to accurately represent the effect of changes in macroscopic properties on the sample. (Sec 5.3) LO 2.6 The student can apply mathematical relationships or estimation to determine macroscopic variables for ideal gases. (Sec )

LO 2.12 The student can qualitatively analyze data regarding real gases to identify deviations from ideal behavior and relate these to molecular interactions. (Sec 5.8) LO 2.15 The student is able to explain observations regarding the solubility of ionic solids and molecules in water and other solvents on the basis of particle views that include intermolecular interactions and entropic effects. (Sec ) LO 3.4 The student is able to relate quantities (measured mass of substances, volumes of solutions, or volumes and pressures of gases) to identify stoichiometric relationships for a reaction, including situations involving limiting reactants and situations in which the reaction has not gone to completion. (Sec 5.4) LO 5.2: The student is able to relate temperature to the motions of particles, either via particulate representations, such as drawings of particles with arrows indicating velocities, and/or via representations of average kinetic energy and distribution of kinetic energies of the particles, such as plots of the Maxwell-Boltzmann distribution. (Sec 5.6)

AP Learning Objectives, Margin Notes and References
LO 2.4 The student is able to use KMT and concepts of intermolecular forces to make predictions about the macroscopic properties of gases, including both ideal and nonideal behavior. LO 2.6 The student can apply mathematical relationships or estimation to determine macroscopic variables for ideal gases.

Why study gases? An understanding of real world phenomena.
An understanding of how science “works.” Copyright © Cengage Learning. All rights reserved

A Gas Uniformly fills any container. Easily compressed.
Mixes completely with any other gas. Exerts pressure on its surroundings. Copyright © Cengage Learning. All rights reserved

Pressure SI units = Newton/meter2 = 1 Pascal (Pa)
1 standard atmosphere = 101,325 Pa 1 standard atmosphere = 1 atm = 760 mm Hg = 760 torr Copyright © Cengage Learning. All rights reserved

Barometer Device used to measure atmospheric pressure.
Mercury flows out of the tube until the pressure of the column of mercury standing on the surface of the mercury in the dish is equal to the pressure of the air on the rest of the surface of the mercury in the dish. Copyright © Cengage Learning. All rights reserved

Pressure Conversions: An Example
The pressure of a gas is measured as 2.5 atm. Represent this pressure in both torr and pascals. Copyright © Cengage Learning. All rights reserved

LO 1.4 The student is able to connect the number of particles, moles, mass, and volume of substances to one another, both qualitatively and quantitatively. LO 2.4 The student is able to use KMT and concepts of intermolecular forces to make predictions about the macroscopic properties of gases, including both ideal and nonideal behavior. LO 2.6 The student can apply mathematical relationships or estimation to determine macroscopic variables for ideal gases.

Liquid Nitrogen and a Balloon
Copyright © Cengage Learning. All rights reserved

Gas laws can be deduced from observations like these.
Mathematical relationships among the properties of a gas (Pressure, Volume, Temperature and Moles) can be discovered. Copyright © Cengage Learning. All rights reserved

Boyle’s Law Pressure and volume are inversely related (constant T, temperature, and n, # of moles of gas). PV = k (k is a constant for a given sample of air at a specific temperature) Copyright © Cengage Learning. All rights reserved

Boyle’s law To play movie you must be in Slide Show Mode
PC Users: Please wait for content to load, then click to play Mac Users: CLICK HERE Copyright © Cengage Learning. All rights reserved

EXERCISE! A sample of helium gas occupies 12.4 L at 23°C and atm. What volume will it occupy at 1.20 atm assuming that the temperature stays constant? 9.88 L (0.956 atm)(12.4 L) = (1.20 atm)(V2) The new volume is 9.88 L. Copyright © Cengage Learning. All rights reserved

Charles’s Law Volume and Temperature (in Kelvin) are directly related (constant P and n). V=bT (b is a proportionality constant) K = °C + 273 0 K is called absolute zero. Copyright © Cengage Learning. All rights reserved

Charles’s Law To play movie you must be in Slide Show Mode

EXERCISE! Suppose a balloon containing 1.30 L of air at 24.7°C is placed into a beaker containing liquid nitrogen at –78.5°C. What will the volume of the sample of air become (at constant pressure)? L The new volume will become L. Remember to convert the temperatures to Kelvin. (1.30 L) / ( ) = V2 / ( ) Copyright © Cengage Learning. All rights reserved

EXERCISE! If 2.45 mol of argon gas occupies a volume of 89.0 L, what volume will 2.10 mol of argon occupy under the same conditions of temperature and pressure? 76.3 L The new volume is 76.3 L. (2.45 mol) / (89.0 L) = (2.10 mol) / (V2) Copyright © Cengage Learning. All rights reserved

LO 1.4 The student is able to connect the number of particles, moles, mass, and volume of substances to one another, both qualitatively and quantitatively. LO 2.4 The student is able to use KMT and concepts of intermolecular forces to make predictions about the macroscopic properties of gases, including both ideal and nonideal behavior. LO 2.5 The student is able to refine multiple representations of a sample of matter in the gas phase to accurately represent the effect of changes in macroscopic properties on the sample. LO 2.6 The student can apply mathematical relationships or estimation to determine macroscopic variables for ideal gases.

We can bring all of these laws together into one comprehensive law:
V = bT (constant P and n) V = an (constant T and P) V = (constant T and n) PV = nRT (where R = L·atm/mol·K, the universal gas constant) Copyright © Cengage Learning. All rights reserved

EXERCISE! An automobile tire at 23°C with an internal volume of 25.0 L is filled with air to a total pressure of 3.18 atm. Determine the number of moles of air in the tire mol The number of moles of air is 3.27 mol. (3.18 atm)(25.0 L) = n( )(23+273) Copyright © Cengage Learning. All rights reserved

EXERCISE! What is the pressure in a L tank that contains kg of helium at 25°C? 114 atm The pressure is 114 atm. Remember to convert kg of helium into moles of helium before using the ideal gas law. (P)(304.0) = ([5.670×1000]/4.003)(0.0821)(25+273) Copyright © Cengage Learning. All rights reserved

EXERCISE! At what temperature (in °C) does 121 mL of CO2 at 27°C and 1.05 atm occupy a volume of 293 mL at a pressure of 1.40 atm? 696°C The new temperature is 696°C. (1.05 atm)(121 mL) / (27+273) = (1.40 atm)(293 mL) / (T ) Copyright © Cengage Learning. All rights reserved

LO 2.6 The student can apply mathematical relationships or estimation to determine macroscopic variables for ideal gases. LO 3.4 The student is able to relate quantities (measured mass of substances, volumes of solutions, or volumes and pressures of gases) to identify stoichiometric relationships for a reaction, including situations involving limiting reactants and situations in which the reaction has not gone to completion.

Molar Volume of an Ideal Gas
For 1 mole of an ideal gas at 0°C and 1 atm, the volume of the gas is L. STP = standard temperature and pressure 0°C and 1 atm Therefore, the molar volume is L at STP. Copyright © Cengage Learning. All rights reserved

EXERCISE! A sample of oxygen gas has a volume of 2.50 L at STP. How many grams of O2 are present? 3.57 g 3.57 g of O2 are present. (1.00 atm)(2.50 L) = n( )(273) n = mol O2 × g/mol = 3.57 g O2 Copyright © Cengage Learning. All rights reserved

EXERCISE! A sample of methane gas having a volume of 2.80L at 25◦C and 1.65 atm was mixed with a sample of oxygen gas having a volume of 35.0L at 31 ◦ C and 1.25 atm. The mixture was then ignited to form carbon dioxide and water. Calculate the volume of carbon dioxide formed at a pressure of 2.5 atm and a temperature of 125 ◦ C L Copyright © Cengage Learning. All rights reserved

Molar Mass of a Gas d = density of gas T = temperature in Kelvin
P = pressure of gas R = universal gas constant Copyright © Cengage Learning. All rights reserved

What is the density of F2 at STP (in g/L)? 1.70 g/L
EXERCISE! What is the density of F2 at STP (in g/L)? 1.70 g/L d = (MM)(P) / (R)(T) d = (19.00g/mol × 2)(1.00 atm) / ( )(273 K) d = 1.70 g/L Copyright © Cengage Learning. All rights reserved

LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated purity of a substance. LO 2.6 The student can apply mathematical relationships or estimation to determine macroscopic variables for ideal gases.

For a mixture of gases in a container, PTotal = P1 + P2 + P3 + . . .
The total pressure exerted is the sum of the pressures that each gas would exert if it were alone. Copyright © Cengage Learning. All rights reserved

After the valve is opened, what is the pressure of the helium gas?
EXERCISE! Consider the following apparatus containing helium in both sides at 45°C. Initially the valve is closed. After the valve is opened, what is the pressure of the helium gas? The pressure is 2.25 atm. There are two ways to solve the problem: 1) Find the new pressure of the gas on the left side after the valve is opened (P1V1=P2V2). The pressure becomes 1.50 atm. (2.00 atm)(9.00 L) = (P2)(9.00 L L) P2 = 1.50 atm Find the new pressure of the gas on the right side after the valve is opened (P1V1=P2V2). The pressure becomes 0.75 atm. (3.00 atm)(3.00 L) = (P2)(9.00 L L) P2 = 0.75 atm The total pressure is therefore = 2.25 atm. 2) Find the number of moles in each chamber separately (using PV = nRT), add the number of moles and volumes on each side, then use PV = nRT to solve for the new pressure. 3.00 atm 3.00 L 2.00 atm 9.00 L Copyright © Cengage Learning. All rights reserved

Calculate the new partial pressure of oxygen. 6.13 atm
EXERCISE! 27.4 L of oxygen gas at 25.0°C and 1.30 atm, and 8.50 L of helium gas at 25.0°C and 2.00 atm were pumped into a tank with a volume of 5.81 L at 25°C. Calculate the new partial pressure of oxygen. 6.13 atm Calculate the new partial pressure of helium. 2.93 atm Calculate the new total pressure of both gases. 9.06 atm For oxygen: P1V1=P2V2 (1.30 atm)(27.4 L) = (P2)(5.81 L) P2 = 6.13 atm For helium: (2.00 atm)(8.50 L) = (P2)(5.81 L) P2 = 2.93 atm The total pressure is therefore = 9.06 atm. Copyright © Cengage Learning. All rights reserved

Mole Fraction(X): the ratio of the number of moles of a given component in a mixture to the total number of moles in the mixture. X1 = N1 = P1 Ntotal Ptotal Copyright © Cengage Learning. All rights reserved

EXERCISE! The mole fraction of nitrogen is Calculate the partial pressure of nitrogen in air when the atmospheric pressure is 760 torr. 593 torr For oxygen: P1V1=P2V2 (1.30 atm)(27.4 L) = (P2)(5.81 L) P2 = 6.13 atm For helium: (2.00 atm)(8.50 L) = (P2)(5.81 L) P2 = 2.93 atm The total pressure is therefore = 9.06 atm. Copyright © Cengage Learning. All rights reserved

EXERCISE! A sample of sold potassium chlorate was heated in a test tube and decomposed to potassium chloride and oxygen gas. The oxygen produced was collected by water displacement at 22◦C at a total pressure of 754 torr. The volume of gas collected was 0.650L, and the vapor pressure of water at 22 ◦ C is 21 torr. Calculate the partial pressure of oxygen in the gas collected and the mass of potassium chlorate in the sample that was decomposed. 733 torr 2.12g For oxygen: P1V1=P2V2 (1.30 atm)(27.4 L) = (P2)(5.81 L) P2 = 6.13 atm For helium: (2.00 atm)(8.50 L) = (P2)(5.81 L) P2 = 2.93 atm The total pressure is therefore = 9.06 atm. Copyright © Cengage Learning. All rights reserved

LO 2.4 The student is able to use KMT and concepts of intermolecular forces to make predictions about the macroscopic properties of gases, including both ideal and nonideal behavior. LO 5.2: The student is able to relate temperature to the motions of particles, either via particulate representations, such as drawings of particles with arrows indicating velocities, and/or via representations of average kinetic energy and distribution of kinetic energies of the particles, such as plots of the Maxwell-Boltzmann distribution. Additional AP References LO 5.2 (see Appendix 7.2, “Thermal Equilibrium, the Kinetic Molecular Theory, and the Process of Heat”)

So far we have considered “what happens,” but not “why.”
In science, “what” always comes before “why.” Copyright © Cengage Learning. All rights reserved

Postulates of the Kinetic Molecular Theory
1) The particles are so small compared with the distances between them that the volume of the individual particles can be assumed to be negligible (zero). Copyright © Cengage Learning. All rights reserved

2) The particles are in constant motion. The collisions of the particles with the walls of the container are the cause of the pressure exerted by the gas. Copyright © Cengage Learning. All rights reserved

Kinetic Molecular Theory
To play movie you must be in Slide Show Mode PC Users: Please wait for content to load, then click to play Mac Users: CLICK HERE Copyright © Cengage Learning. All rights reserved

CONCEPT CHECK! He H2 You are holding two balloons of the same volume. One contains helium, and one contains hydrogen. Complete each of the following statements with “different” or “the same” and be prepared to justify your answer. Copyright © Cengage Learning. All rights reserved

He H2 The pressures of the gas in the two balloons are __________.
CONCEPT CHECK! He H2 The pressures of the gas in the two balloons are __________. the same Copyright © Cengage Learning. All rights reserved

He H2 The temperatures of the gas in the two balloons are __________.
CONCEPT CHECK! He H2 The temperatures of the gas in the two balloons are __________. the same Copyright © Cengage Learning. All rights reserved

He H2 The densities of the gas in the two balloons are __________.
CONCEPT CHECK! He H2 The densities of the gas in the two balloons are __________. different Copyright © Cengage Learning. All rights reserved

Pressure versus volume at constant temperature and moles.
CONCEPT CHECK! Sketch a graph of: Pressure versus volume at constant temperature and moles. Copyright © Cengage Learning. All rights reserved

Molecular View of Boyle’s Law

Molecular View of Charles’s Law

Molecular View of the Ideal Gas Law

You then cool the gas sample.
CONCEPT CHECK! You have a sample of nitrogen gas (N2) in a container fitted with a piston that maintains a pressure of 6.00 atm. Initially, the gas is at 45°C in a volume of 6.00 L. You then cool the gas sample. Copyright © Cengage Learning. All rights reserved

The pressure of the gas increases. The volume of the gas increases.
CONCEPT CHECK! Which best explains the final result that occurs once the gas sample has cooled? The pressure of the gas increases. The volume of the gas increases. The pressure of the gas decreases. The volume of the gas decreases. Both volume and pressure change. d) is correct. Copyright © Cengage Learning. All rights reserved

CONCEPT CHECK! The gas sample is then cooled to a temperature of 15°C. Solve for the new condition. (Hint: A moveable piston keeps the pressure constant overall, so what condition will change?) 5.43 L The new volume is 5.43 L (use Charles’s law to solve for the new volume). (6.00 L) / (45+273) = (V2) / (15+273) Copyright © Cengage Learning. All rights reserved

CONCEPT CHECK! Calculate the root mean square velocity for the helium atoms in a sample of gas at 25◦C x 103 m/s The new volume is 5.43 L (use Charles’s law to solve for the new volume). (6.00 L) / (45+273) = (V2) / (15+273) Copyright © Cengage Learning. All rights reserved

Maxwell-Boltzmann Distributions

LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated purity of a substance.

Diffusion – the mixing of gases.
Effusion – describes the passage of a gas through a tiny orifice into an evacuated chamber. Rate of effusion measures the speed at which the gas is transferred into the chamber. Copyright © Cengage Learning. All rights reserved

Effusion To play movie you must be in Slide Show Mode

Diffusion To play movie you must be in Slide Show Mode

LO 2.12 The student can qualitatively analyze data regarding real gases to identify deviations from ideal behavior and relate these to molecular interactions. LO 2.15 The student is able to explain observations regarding the solubility of ionic solids and molecules in water and other solvents on the basis of particle views that include intermolecular interactions and entropic effects.

We must correct for non-ideal gas behavior when:
An ideal gas is a hypothetical concept. No gas exactly follows the ideal gas law. We must correct for non-ideal gas behavior when: Pressure of the gas is high. Temperature is low. Under these conditions: Concentration of gas particles is high. Attractive forces become important. Copyright © Cengage Learning. All rights reserved

Plots of PV/nRT Versus P for Several Gases (200 K)

Plots of PV/nRT Versus P for Nitrogen Gas at Three Temperatures

For a real gas, the actual observed pressure is lower than the pressure expected for an ideal gas due to the intermolecular attractions that occur in real gases. Copyright © Cengage Learning. All rights reserved

Values of the van der Waals Constants for Some Gases
The value of a reflects how much of a correction must be made to adjust the observed pressure up to the expected ideal pressure. A low value for a reflects weak intermolecular forces among the gas molecules. Copyright © Cengage Learning. All rights reserved

LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated.

Similar presentations

Presentation on theme: "LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated.

Similar presentations

Presentation on theme: "LO 1.3 The student is able to select and apply mathematical relationships to mass data in order to justify a claim regarding the identify and/or estimated."— Presentation transcript:

Similar presentations

About project

Feedback