1. Chapter 2 , Cont… Socio-technical Systems (Computer-based System Engineering)

2. 3- System modelling
An architectural model presents an abstract view of the sub-systems making up a system
May include major information flows between sub-systems
Usually presented as a block diagram
May identify different types of functional component in the model

3. Intruder alarm system Model OR Architecture

4. Component types in alarm system
Sensor
Movement sensor, door sensor (detect door opening, and movement in the rooms)
Siren
Siren- warning when intruder is suspectedشك .
Communication
Telephone caller, make external calls to police.
Co-ordination
Alarm controller, control the operation of the system.
Interface
Voice synthesizer, a synthesize message giving the location of the intruder.

5. Functional system components
Sensor components
Actuator components (siren)
Computation components (Alarm Controller)
Communication components
Co-ordination components
Interface components

6. System components Sensor components
Collect information from the system’s environment e.g. radars in an air traffic control system
Computation components
Carry out some computations on an input to produce an output e.g. a floating point processor in a computer system

7. System components continued…
Communication components
Allow system components to communicate with each other e.g. network linking distributed computer
Interface components
Facilitate the interactions of other system components e.g. operator interface
All components are now usually software controlled

8. ATC (air traffic) System Architecture Large System

9. 4- Sub-system development
Typically parallel projects developing the hardware, software and communications from scratch.
May involve some COTS (Commercial Off-The-Shelf) systems.. Bought for integration to system.
COTS usually cheaper than to develop special-purpose component
COTS may not meet the requirement exactly. (problem)
If COTS product available it is worth to expense your time of rethinking in the design.

10. Sub-system development
When a problem is encountered in a system, a system need modification.
For systems that involve extensive hardware, making modification after manufacturing has started is very expensive…
Solution
“Work arounds” that include software change that include software change requirement because software is more flexible .

11. 5- System Integration
The process of putting hardware, software and people together to make a system
The system may be integrated using:
1- a “big bang approach”: all subsystems are integrated at the same time.
2- incremental integrated process: the sub-systems are integrated one at a time

12. System Integration cont…
Incremental integrated process is the best approach
because:
It reduce the cost of error location.
In “big bang approach” the error may be from any of these subsystems. While in “incremental process” the errors are probably on the new subsystem or in the interaction between the existing subsystem and the new subsystem.
Incremental integrated process problem:
Interface problems between sub-systems are usually found at this stage (integration + testing)
(Data flow( in / out ) at the boundary.)

13. 6- System installation- problems
Environmental assumptions may be incorrect
May be human resistance to the introduction of a new system
May be physical installation problems (e.g. cabling problems)
Operator training has to be identified

14. System operation
Users may use the system in a way which is not suitable by system designers
May reveal problems in the interaction with other systems
Physical problems of incompatibility
Increased operator error rate because of inconsistent interfaces

15. 7- System evolution
Large and complex systems have a long lifetime. They must evolve to meet changing requirements[ error in system or change environment]
Evolution is inherently costly because:
Changes must be analyzed from a technical and business perspective [after changing must get the same goal of the system]
Sub-systems interact [change in subsystem may affects on other subsystems]so problems can arise
As systems Age: System structure is corrupted as changes are made to it, so the cost of making changes increases
Existing systems which must be maintained are sometimes called legacy systems

16. 8- System decommissioning
Taking the system out of service after its useful operational lifetime
Regards to Hardware:
May require removal of materials (e.g. dangerous chemicals) which pollute the environment
Regards to software:
May require data to be restructured and converted to be used in some other system

17. Organizations/people/systems
If you do not understand the organizational environment where a system is used, then the system is rejected

18. Systems and their environment
Systems are exist in an environment
The system is intended to make some changes in its environment, heating system changes its environment by increasing or decreasing its temperature.
Environment affects the functioning of the system
e.g. system may require electrical supply from its environment

19. System hierarchies

20. Human and organizational factors that affect the system design:
Process changes, does the system require changes to the work processes in the environment? If so, training is required. If so they may resist the introduction to the system.
Job changes, does the system de-skill the users in an environment or cause them to change the way they work? If so they may resist the introduction to the system.
Organizational changes, does the system change the political power structure in an organization?
e.g. Those who know how to operate in a Complex system have a great deal of political power.

21. Organizational processes
The processes of systems engineering interact with procurement processes and the process of using and operating the system.
Procurement/development/ operational processes

22. System procurement processes
procurement processes: is embedded within the client organization that will buy and use the system.

23. System procurement process
This process concerned with: deciding on the best suppliers of that system and the best way for the organization to acquire a system to meet some need
Some system specification is usually necessary
You need a high level specification of what the system should do, in order to design or build (buy) a system development
The specification may allow you to buy a commercial off-the-shelf (COTS) system. Almost always cheaper than developing a system from scratch

24. System procurement process Issues
Requirements may have to be modified to match the capabilities of off-the-shelf components
The requirements specification may be part of the contract for the development of the system.
After the contractor to build the system has been selected, there is usually a contract negotiation period for further changes to the requirements to be agreed upon,

25. Contractors and sub-contractors
The procurement of large hardware/software systems is usually based on some principal contractor
Sub-contracts are issued to other suppliers to supply parts of the system
Customer deals with the principal contractor and does not deal directly with sub-contractors

26. Contractor/Sub-contractor model

27. Organizational processes, Operational processes
Operational processes : the using of the system.
Operational processes should be designed to be flexible and should not force operations to be done in a particular way.
It is important that human operators can use their initiative if problems arise.
Example:
Operators of Air traffic control system follow specific processes when the aircraft enter and leave airspace, when they have to change height , speed.

28. Legacy systems
It is a Socio-technical systems that have been developed in the past and often use old or obsolete technology.
it is often too risky to replace these systems, because the new system may not work well
Bank customer accounting system;

29. Legacy system components

30. Legacy system components
Hardware - may be obsolete mainframe hardware.
Support software - may rely on support software from suppliers who are no longer in business.
Application software - may be written in obsolete programming languages.
Application data - often inconsistent and may be duplicated.

31. Alternative way for the component of legacy system : Layered model

32. Layered Legacy system Each layer depend on the layer below it
Changing on layer may require consequent changes to layers that are above an below the changed layer.

33. Key points
System engineering involves input from a range of disciplines, SW, HW, People and Environment.
Emergent properties are properties that are characteristic of the system as a whole and not its component parts
System architectural models show major sub-systems and inter-connections. They are usually described using block diagrams

34. Key points
The systems engineering process is usually a waterfall model and includes specification, design, development and integration.
System procurement is concerned with deciding which system to buy and who to buy it from