1. Detector noise analysis (DINO) demo Max Mutchler ACS-R Optimization Campaign dry-dryrun 30 January 2009

2. DINO is part of a collection of IDL routines created by the ACS IDT at JHU to process pre-flight data (in TV format). Initially, it expected input frames in TV format, which have been archived in their dedicated IDT database (and could be identified by their database entry numbers). It has since been modified to handle other formats, including inflight FITS format, and to be run in batch mode.

3. Incidentally, the IDT preflight database is a good thing to know about. Pre-flight data are searchable via the web, and identified by a database entry number. The data is archived on CD- ROM, and this interface can help you search the database and identify which CD-ROMs contain the data you are seeking.

4. DINO cookbook File menu: open ACS FITS (choose a FITS file) GUI: select amp: A,B,C,D (cycle through them one at a time) Hit “Calculate” button (will plot spectrum) Adjust plot settings and threshold (0.002) and plot scaling; hit the "lock settings" button to retain them Hit the “Plot” button to re-plot with new settings Hit the “Peaks” button to list peaks above threshold File menu: Save peaks (creates dino_peaks.txt) Hit “Hardcopy” button (creates dino_spectrum.ps) Rename output files (example for amp A): > mv dino_peaks.txt rootname_a_peaks.txt > mv dino_spectrum.ps rootname_a_spectrum.ps Repeat for next amp, image. A graphical example follows… Not covered here: running in batch mode; other input FITS formats > ssh –XY sofialice (or install from ACS IDT website) > cd pathname… > start_acs (a special IDL startup) ACS> dino (GUI will start up, see next slides)

5. > ssh –XY sofialice > start_acs ACS> dino plot window File menu buttons (don’t adjust these parameters) peaks/plot parameters messages

6. File: Open ACS FITS

7. Select amp: A B C D

8. See peaks? Calculate button

9. Zooming-in on peaks Plot transform button (replot) Adjust x,y scaling

10. Peaks button

11. File: Save peaks (dino_peaks.txt) Hardcopy button (dino_spectrum.ps )

12. Hardcopy plot (dino_spectrum.ps)

13. Setting a lower threshold, recording more peaks

14. Setting the threshold too low: recording no peaks! message: