2. Topic 17: States of Matter Table of Contents Topic 17 Topic 17 Click box to view movie clip.

3. Topic 17: States of Matter Table of Contents Topic 17 Topic 17 Click box to view movie clip.

4. Gases—The Kinetic-Molecular Theory States of Matter: Basic Concepts The kinetic-molecular theory describes the behavior of gases in terms of particles in motion. Topic 17 Topic 17

5. 1. Gases consist of small particles that are separated from one another by empty space. Particle size States of Matter: Basic Concepts 2. The volume of the particles is small compared with the volume of the empty space. Topic 17 Topic 17 3. Because gas particles are far apart, there are no significant attractive or repulsive forces among them.

6. 4. Gas particles are in constant, random motion. Particle motion States of Matter: Basic Concepts 5. Particles move in a straight line until they collide with other particles or with the walls of their container. Topic 17 Topic 17 6. Collisions between gas particles are elastic.

7. Particle motion States of Matter: Basic Concepts Topic 17 Topic 17 An elastic collision is one in which no kinetic energy is lost.

8. Two factors determine the kinetic energy of a particle: mass and velocity. Particle energy States of Matter: Basic Concepts Topic 17 Topic 17

9. Particle energy States of Matter: Basic Concepts In a sample of a single gas, all particles have the same mass but all particles do not have the same velocity. Topic 17 Topic 17 Therefore, all particles do not have the same kinetic energy.

10. Kinetic energy and temperature are related. Particle energy States of Matter: Basic Concepts Temperature is a measure of the average kinetic energy of the particles in a sample of matter. Topic 17 Topic 17 At a given temperature, all gases have the same average kinetic energy.

11. Kinetic-molecular theory can help explain the behavior of gases. Explaining the Behavior of Gases States of Matter: Basic Concepts Topic 17 Topic 17 Low density

12. The large amount of empty space between the air particles in those pockets allows the air to be easily pushed into a smaller volume. Compression and expansion States of Matter: Basic Concepts Topic 17 Topic 17

13. Diffusion and effusion States of Matter: Basic Concepts Topic 17 Topic 17 The random motion of the gas particles causes the gases to mix until they are evenly distributed. Diffusion is the term used to describe the movement of one material through another.

14. Diffusion and effusion States of Matter: Basic Concepts Topic 17 Topic 17 Lighter particles diffuse more rapidly than heavier particles.

15. Diffusion and effusion States of Matter: Basic Concepts Topic 17 Topic 17 During effusion, a gas escapes through a tiny opening.

16. Pressure is defined as force per unit area. Gas Pressure States of Matter: Basic Concepts Topic 17 Topic 17 Gas particles exert pressure when they collide with the walls of their container. Because an individual gas particle has little mass, it can exert little pressure. But, with many particles colliding, the pressure can be substantial.

17. A barometer is an instrument used to measure atmospheric pressure. Measuring air pressure States of Matter: Basic Concepts Topic 17 Topic 17

18. Measuring air pressure States of Matter: Basic Concepts Topic 17 Topic 17 Changes in air temperature or humidity cause air pressure to vary.

19. Dalton’s law of partial pressures States of Matter: Basic Concepts Topic 17 Topic 17 Each gas in a mixture exerts pressure independently of the other gases present. Dalton’s law of partial pressures states that the total pressure of a mixture of gases is equal to the sum of the pressures of all the gases in the mixture.

20. Dalton’s law of partial pressures States of Matter: Basic Concepts Topic 17 Topic 17 Dalton’s law of partial pressures can be summarized as P total represents the total pressure of a mixture of gases. P 1, P 2, and so on represent the partial pressures of each gas in the mixture.

21. Liquids States of Matter: Basic Concepts Topic 17 Topic 17 Individual liquid molecules do not have fixed positions in the liquid. Forces of attraction between liquid particles limit their range of motion.

22. Density and compression States of Matter: Basic Concepts Topic 17 Topic 17 Because they are at the same temperature, both gas and liquid particles have the same average kinetic energy.

23. Density and compression States of Matter: Basic Concepts Topic 17 Topic 17 Liquids can be compressed, but only very little. An enormous amount of pressure must be applied to reduce the volume of a liquid by even a few percent.

24. Fluidity States of Matter: Basic Concepts Topic 17 Topic 17 Fluidity is the ability to flow. Gases and liquids are classified as fluids because they can flow.

25. Viscosity States of Matter: Basic Concepts Topic 17 Topic 17 Viscosity is a measure of the resistance of a liquid to flow. The particles in a liquid are close enough for attractive forces to slow their movement as they flow past one another.

26. Viscosity and temperature States of Matter: Basic Concepts Topic 17 Topic 17 Viscosity decreases with temperature increases. The added energy makes it easier for the molecules to overcome the intermolecular forces that keep the molecules from flowing.

27. Surface tension States of Matter: Basic Concepts Topic 17 Topic 17 The energy required to increase the surface area of a liquid by a given amount is called surface tension. Click box to view movie clip.

28. Surface tension States of Matter: Basic Concepts Topic 17 Topic 17 In general, the stronger the attractions between particles, the greater the surface tension.

29. Density of solids States of Matter: Basic Concepts Topic 17 Topic 17 In general, the particles in a solid are more closely packed than those in a liquid. Thus, most solids are more dense than most liquids.

30. States of Matter: Additional Concepts Phase changes that require energy The amount of energy required to melt one mole of a solid depends on the strength of the forces keeping the particles together. The melting point of a crystalline solid is the temperature at which the forces holding the crystal lattice together are broken and the solid becomes a liquid. Topic 17 Topic 17 Because amorphous solids tend to act like liquids when they are in the solid state, it’s hard to specify their melting points.

31. States of Matter: Additional Concepts Phase changes that require energy When liquid water is heated, some molecules escape from the liquid and enter the gas phase. Topic 17 Topic 17 Click box to view movie clip.

32. States of Matter: Additional Concepts Phase changes that require energy Topic 17 Topic 17 Vaporization is the process by which a liquid changes into a gas or vapor. When vaporization occurs only at the surface of a liquid, the process is called evaporation.

33. States of Matter: Additional Concepts Phase changes that require energy The process by which a solid changes directly into a gas without first becoming a liquid is called sublimation. Topic 17 Topic 17

34. States of Matter: Additional Concepts Phase changes that release energy Topic 17 Topic 17 Condensation is the process by which a gas or vapor becomes a liquid. It is the reverse of vaporization.

35. States of Matter: Additional Concepts Phase changes that release energy The freezing point is the temperature at which a liquid becomes a solid. Topic 17 Topic 17 When a substance changes from a gas or vapor directly into a solid without first becoming a liquid, the process is called deposition. Deposition is the reverse of sublimation. Frost is an example of water deposition.