1. Chapter Four Managing Windows XP File Systems and Storage

2. Objectives Understand basic and dynamic storage Understand basic and dynamic storage Understand the drive configurations supported by Windows XP Understand the drive configurations supported by Windows XP Understand the FAT, FAT32, and NTFS file systems Understand the FAT, FAT32, and NTFS file systems Understand permissions, sharing, and other security issues related to file systems Understand permissions, sharing, and other security issues related to file systems Understand Windows XP drive, volume, and partition maintenance and administration Understand Windows XP drive, volume, and partition maintenance and administration

3. File Storage Basics Windows XP supports two types of storage: Windows XP supports two types of storage: Basic storage Basic storage Centers on partitioning a physical disk Centers on partitioning a physical disk Dynamic storage Dynamic storage Not based on partitions but volumes Not based on partitions but volumes

4. Basic Storage There are two types of partitions: There are two types of partitions: Primary partitions Primary partitions Extended partitions Extended partitions A primary partition must be marked active A primary partition must be marked active Indicates to the computer’s BIOS that it host the necessary files to boot an operating system Indicates to the computer’s BIOS that it host the necessary files to boot an operating system

5. Basic Storage Typically you’ll want to create partitions or volumes as large as the operating system and file system allow Typically you’ll want to create partitions or volumes as large as the operating system and file system allow FAT—4 GB FAT—4 GB FAT32—32 GB FAT32—32 GB NTFS—4 TB NTFS—4 TB

6. Basic Storage There are two partitions associated with Windows XP: There are two partitions associated with Windows XP: System partition System partition Active partition where the boot files are stored Active partition where the boot files are stored Boot partition Boot partition Hosts the main Windows XP system files and is the initial default location for the paging file Hosts the main Windows XP system files and is the initial default location for the paging file

7. Dynamic Storage This storage method offers drive structures from simple volumes (entire hard drives as a single formatted entity) to fully fault tolerant RAID-5 configurations This storage method offers drive structures from simple volumes (entire hard drives as a single formatted entity) to fully fault tolerant RAID-5 configurations New drives can be transformed into dynamic storage hosts through a selection Wizard New drives can be transformed into dynamic storage hosts through a selection Wizard This Wizard is launched when the Disk Management tool is accessed This Wizard is launched when the Disk Management tool is accessed

8. Dynamic Storage Figure 4-1: A dynamic volume seen through the Disk Management portion of Computer Management

9. Dynamic Storage Mount point Mount point Single drive letter Single drive letter Figure 4-2: Select Disks page of the New Volume Wizard

10. Dynamic Storage Figure 4-3: Assign Drive Letter or Path page of the New Volume Wizard

11. Dynamic Storage Figure 4-4: Format Volume page of the New Volume Wizard

12. Dynamic Storage Table 4-1: Functions and Capabilities of Basic and Dynamic Disks

13. Removable Storage Devices The inclusion of PnP technology in Windows XP brings support for removable media and storage devices The inclusion of PnP technology in Windows XP brings support for removable media and storage devices These removable storage devices or storage media can contain only a single partition These removable storage devices or storage media can contain only a single partition They cannot participate in dynamic storage They cannot participate in dynamic storage They cannot host extended partitions They cannot host extended partitions They cannot be marked active They cannot be marked active

14. Drive Configurations There are five drive configurations or structures supported by Windows XP: There are five drive configurations or structures supported by Windows XP: Simple volume Simple volume Spanned volume Spanned volume Striped volume Striped volume Mirrored volume Mirrored volume RAID-5 volume RAID-5 volume

15. File Systems Windows XP supports: Windows XP supports: File Allocation Table (FAT; also called FAT16) File Allocation Table (FAT; also called FAT16) FAT32 FAT32 New Technology File System (NTFS) New Technology File System (NTFS) FAT, FAT32, and NTFS all support long file names (LFNs) FAT, FAT32, and NTFS all support long file names (LFNs)

16. FAT and FAT32 The important features of FAT, under Windows XP: The important features of FAT, under Windows XP: Supports volumes up to 4 GB in size Supports volumes up to 4 GB in size Most efficient on volumes smaller than 256 MB Most efficient on volumes smaller than 256 MB Root directory can contain only 512 entries Root directory can contain only 512 entries No file-level compression No file-level compression No file-level security No file-level security

17. FAT and FAT32 FAT32 is simply an enhanced version of FAT that was originally released with Windows 95 OSR2 FAT32 is simply an enhanced version of FAT that was originally released with Windows 95 OSR2 A FAT volume is divided into clusters A FAT volume is divided into clusters A cluster is a group of one or more sectors divided into a single non-divisible unit A cluster is a group of one or more sectors divided into a single non-divisible unit

18. FAT and FAT32 Table 4-2: FAT16 and FAT32 Cluster Sizes

19. NTFS The important features of NTFS, under Windows XP: The important features of NTFS, under Windows XP: Supports volumes up to 2 TB in size Supports volumes up to 2 TB in size Most efficient on volumes larger than 512 MB Most efficient on volumes larger than 512 MB Root directory can contain unlimited entries Root directory can contain unlimited entries File-level compression File-level compression

20. NTFS The important features of NTFS, under Windows XP (cont.): The important features of NTFS, under Windows XP (cont.): File-level security File-level security File-level encryption File-level encryption Disk quotas Disk quotas POSIX support POSIX support

21. NTFS Table 4-3: NTFS Default Cluster Sizes

22. Converting File Systems If you decide you need to change the format, you have only two options: If you decide you need to change the format, you have only two options: Reformat with the new file system Reformat with the new file system Convert from FAT/FAT32 to NTFS Convert from FAT/FAT32 to NTFS

23. File Compression The ability to compress data on the basis of: The ability to compress data on the basis of: Single files Single files Folders Folders Entire volumes Entire volumes Offers the benefit of being able to store more data in the same space, but at the cost of some performance Offers the benefit of being able to store more data in the same space, but at the cost of some performance

24. Disk Management Actions In addition to creating volumes and transforming devices into dynamic storage, the Disk Management tool offers several other useful features In addition to creating volumes and transforming devices into dynamic storage, the Disk Management tool offers several other useful features The All Tasks submenu of the Action menu is context- based, depending on the type of object selected The All Tasks submenu of the Action menu is context- based, depending on the type of object selected Disk Management can be used to manipulate storage devices on remote computers Disk Management can be used to manipulate storage devices on remote computers

25. Disk Management Actions Figure 4-5: A drive Properties dialog box, General tab

26. Disk Management Actions Figure 4-6: A drive Properties dialog box, Volumes tab

27. Disk Management Actions Figure 4-7: A volume Properties dialog box, General tab

28. Disk Management Actions Figure 4-8: A volume Properties dialog box, Tools tab

29. Disk Management Actions Figure 4-9: A volume Properties dialog box, Hardware tab

30. Disk Management Actions Figure 4-10: A volume Properties dialog box, Sharing tab

31. Disk Management Actions Figure 4-11: A volume Properties dialog box, Security tab

32. Disk Management Actions Figure 4-12: A volume Properties dialog box, Quota tab

33. Drive Letters and Mount Points Windows XP uses drive letters to grant applications and user interface utilities access to file system resources Windows XP uses drive letters to grant applications and user interface utilities access to file system resources A mount point is an alternative to drive letters A mount point is an alternative to drive letters A mount point connects a FAT/FAT32 or NTFS volume or partition to an empty directory on an NTFS volume or partition A mount point connects a FAT/FAT32 or NTFS volume or partition to an empty directory on an NTFS volume or partition

34. Disk Cleanup Figure 4-13: Disk Cleanup dialog box

35. Check Disk Check Disk (Error-checking) Check Disk (Error-checking) Inspection utility used to: Inspection utility used to: Examine disk integrity Examine disk integrity Locate both logical and physical errors on a hard drive Locate both logical and physical errors on a hard drive

36. Defragmentation Fragmentation Fragmentation The division of a file into two or more parts where each part is stored in a different location on the hard drive The division of a file into two or more parts where each part is stored in a different location on the hard drive Defragmentation Defragmentation Process of re-organizing files so they are stored contiguously and no gaps are left between files Process of re-organizing files so they are stored contiguously and no gaps are left between files

37. Defragmentation Figure 4-14: Disk Defragmenter

38. NTFS Folder Object Figure 4-15: An NTFS folder object’s Properties dialog box, General tab

39. NTFS Folder Object Figure 4-16: Advanced Attributes dialog box

40. FAT/FAT32 Folder Object Figure 4-17: A FAT/FAT32 folder object’s Properties dialog box, General tab

41. NTFS File Object Figure 4-18: An NTFS file object’s Properties dialog box, General tab

42. FAT/FAT32 File Object Figure 4-19: A FAT/FAT32 file object’s Properties dialog box, General tab

43. NTFS Mounted Volume Object Figure 4-20: An NTFS mounted volume object’s Properties dialog box, General tab

44. FAT/FAT32 Mounted Volume Object A FAT/FAT32 mounted volume object’s Properties dialog box has three tabs: A FAT/FAT32 mounted volume object’s Properties dialog box has three tabs: General General Sharing Sharing Customize Customize

45. NTFS File and Folder Permissions NTFS file and folder permissions are nearly identical NTFS file and folder permissions are nearly identical The only differences are: The only differences are: Files do not offer child inheritance options Files do not offer child inheritance options Some obvious permissions apply only to folders or only to files Some obvious permissions apply only to folders or only to files

46. NTFS File and Folder Permissions Figure 4-21: The Security tab of an NTFS object’s Properties dialog box

47. NTFS File and Folder Permissions Figure 4-22: The Advanced Security Settings Properties dialog box for an NTFS object, Permissions tab

48. NTFS File and Folder Permissions Figure 4-23: The Permission Entry dialog box

49. NTFS Permission Basics Rules to keep in mind: Rules to keep in mind: NTFS object permissions always apply, no matter if the accessing user is local or remote NTFS object permissions always apply, no matter if the accessing user is local or remote NTFS object permissions are cumulative NTFS object permissions are cumulative NTFS file permissions override any contradictory settings on the parent or container folder NTFS file permissions override any contradictory settings on the parent or container folder Deny overrides all other specific Allows Deny overrides all other specific Allows When disabling inheritance for an NTFS object, select to either Copy the parent object’s permissions to the current object or Remove permissions assigned from the parent and retain only object-specific settings When disabling inheritance for an NTFS object, select to either Copy the parent object’s permissions to the current object or Remove permissions assigned from the parent and retain only object-specific settings

50. Copying and Moving NTFS Objects There are four different situations to keep in mind when dealing with NTFS source and destination volumes or partitions: There are four different situations to keep in mind when dealing with NTFS source and destination volumes or partitions: Moving an object within the same volume or partition Moving an object within the same volume or partition Copying an object within the same volume or partition Copying an object within the same volume or partition Moving an object from one volume or partition to another Moving an object from one volume or partition to another Copying an object from one volume or partition to another Copying an object from one volume or partition to another

51. Managing Shared Folders Figure 4-24: A folder object’s Properties dialog box, Sharing tab

52. Managing Shared Folders Figure 4-25: The Share Permissions dialog box

53. Managing Shared Folders Important issues to keep in mind when working with shares: Important issues to keep in mind when working with shares: The three permission levels on a share are the only way to impose security on shared FAT volumes The three permission levels on a share are the only way to impose security on shared FAT volumes Shares are folders not individual files Shares are folders not individual files Share permissions only apply to the network access points Share permissions only apply to the network access points Default permission for a new share is Full Control for the Everyone group Default permission for a new share is Full Control for the Everyone group Multiple share-permission levels due to group membership are cumulative Multiple share-permission levels due to group membership are cumulative

54. Managing Shared Folders Important issues to keep in mind when working with shares (cont.): Important issues to keep in mind when working with shares (cont.): Deny always overrides any other specific allowed Deny always overrides any other specific allowed The most restrictive permissions of cumulative share or cumulative NTFS apply The most restrictive permissions of cumulative share or cumulative NTFS apply Share permissions only restrict access for network users, not local users Share permissions only restrict access for network users, not local users A moved folder is no longer shared A moved folder is no longer shared

55. Media Folders and the Customize Tab Figure 4-26: A file object’s Properties dialog box, Customize tab

56. Simple File Sharing Used when quick and easy file sharing is needed from a Windows XP Professional system Used when quick and easy file sharing is needed from a Windows XP Professional system Really only effective when Windows XP is a member of a workgroup Really only effective when Windows XP is a member of a workgroup When enabled, as it is by default, all shared folders are accessible by everyone on the network When enabled, as it is by default, all shared folders are accessible by everyone on the network

57. Zipping Files and Compressed Folders Zipped files Zipped files Compressed files that house one or more files, and possibly a directory structure, into a single.zip file Compressed files that house one or more files, and possibly a directory structure, into a single.zip file Zipped files are treated as compressed folders Zipped files are treated as compressed folders

58. CD Burning Windows XP includes native support for writing files either to: Windows XP includes native support for writing files either to: A CDR A CDR A CDRW A CDRW This feature does require a compatible CDR or CDRW drive This feature does require a compatible CDR or CDRW drive

59. Offline Files Figure 4-27: Offline Files tab of Folder Options

60. Folder Redirection The mechanism of altering the physical storage location of commonly used folders to a network server while retaining the original local access methods The mechanism of altering the physical storage location of commonly used folders to a network server while retaining the original local access methods Folder Redirection can be configured through two different mechanisms Folder Redirection can be configured through two different mechanisms When either of these mechanisms is used, the redirected items are still accessed in the exact same manner as before by each user When either of these mechanisms is used, the redirected items are still accessed in the exact same manner as before by each user

61. Removable Media Removable media include any storage device that is installed onto a Windows XP system Removable media include any storage device that is installed onto a Windows XP system Storage devices can be: Storage devices can be: Read-only Read-only Write-once Write-once Re-writeable Re-writeable

62. Troubleshooting Access Problems In most access problems, either of the following occurred: In most access problems, either of the following occurred: The resource object has the wrong settings The resource object has the wrong settings The user account has the wrong settings The user account has the wrong settings

63. Troubleshooting Access Problems Guidelines to design your permission levels and to avoid common problems: Guidelines to design your permission levels and to avoid common problems: Grant permissions only as needed Grant permissions only as needed Rely upon NTFS to restrict access Rely upon NTFS to restrict access Grant Full Control only when necessary, even on shares Grant Full Control only when necessary, even on shares

64. Troubleshooting Access Problems Guidelines to design your permission levels and to avoid common problems (cont.): Guidelines to design your permission levels and to avoid common problems (cont.): Change permissions on a folder level, allow changes to affect all child elements Change permissions on a folder level, allow changes to affect all child elements Use multiple folders and subfolders to separate files into groups for different permissions levels Use multiple folders and subfolders to separate files into groups for different permissions levels Stay away from the Deny setting unless absolutely necessary Stay away from the Deny setting unless absolutely necessary

65. The Microsoft Distributed File System (DFS) A Windows 2000 or Windows.NET Server hosted service used to manipulate and manage shared resources A Windows 2000 or Windows.NET Server hosted service used to manipulate and manage shared resources The benefits of DFS include: The benefits of DFS include: All network resources are organized in a single-tree structure All network resources are organized in a single-tree structure User navigation of resources is simplified because the host computer name is not required User navigation of resources is simplified because the host computer name is not required

66. The Microsoft Distributed File System (DFS) The benefits of DFS include (cont.): The benefits of DFS include (cont.): Powerful administration is simplified Powerful administration is simplified Access permissions are preserved Access permissions are preserved The DFS root is accessed in the same way as a normal share The DFS root is accessed in the same way as a normal share Once inside the DFS root, all other resource accesses are simplified and do not require knowing the name of the host systems Once inside the DFS root, all other resource accesses are simplified and do not require knowing the name of the host systems

67. Chapter Summary Be familiar with basic and dynamic storage concepts Be familiar with basic and dynamic storage concepts The FAT and FAT32 file systems are retained by Windows XP for backward compatibility with other operating systems on the same multi-boot system The FAT and FAT32 file systems are retained by Windows XP for backward compatibility with other operating systems on the same multi-boot system Mount points are a new mapping method in Windows XP Mount points are a new mapping method in Windows XP All file system objects within Windows XP have unique properties and controls All file system objects within Windows XP have unique properties and controls

68. Chapter Summary Windows XP includes support for: Windows XP includes support for: Simple File Sharing Simple File Sharing Zipped files Zipped files CD burning CD burning Folder redirection Folder redirection Management of removable media Management of removable media Support for DFS Support for DFS