Unit 4 “Chemical Names and Formulas”

Name: Unit 4 “Chemical Names and Formulas”
Uploaded: 2017-10-31T10:10:37+00:00
Duration: PTM32S52
Channel: Curtis Paul
Description: Unit 4 “Chemical Names and Formulas”

Unit 4 “Chemical Names and Formulas”
H2O Unit 4 “Chemical Names and Formulas” Chemistry Troy High School Mr. Blake/Gower

Atoms and Ions Atoms are electrically neutral.
Because there is the same number of protons (+) and electrons (-). Ions are atoms, or groups of atoms, with a charge (positive or negative) They have different numbers of protons and electrons. Only electrons can move, and ions are made by gaining or losing electrons.

F1- O2- An Anion is… A negative ion. Has gained electrons.
Nonmetals can gain electrons. Charge is written as a superscript on the right. Has gained one electron (-ide is new ending = fluoride) F1- O2- Gained two electrons (oxide)

K1+ Ca2+ A Cation is… A positive ion. Formed by losing electrons.
More protons than electrons. Metals can lose electrons K1+ Has lost one electron (no name change for positive ions) Ca2+ Has lost two electrons

Predicting Ionic Charges
Group 1A: Lose 1 electron to form 1+ ions H1+ Li1+ Na1+ K1+ Rb1+

Group 2A: Loses 2 electrons to form 2+ ions Be2+ Mg2+ Ca2+ Sr2+ Ba2+

Loses 3 electrons to form 3+ ions Group 3A: B3+ Al3+ Ga3+

Neither! Group 4A elements rarely form ions (they tend to share) Do they lose 4 electrons or gain 4 electrons? Group 4A:

Nitride Gains 3 electrons to form 3- ions Group 5A: P3- Phosphide As3- Arsenide

Oxide Gains 2 electrons to form 2- ions Group 6A: S2- Sulfide Se2- Selenide

Gains 1 electron to form 1- ions Group 7A: F1- Fluoride Br1- Bromide Cl1- Chloride I1- Iodide

Stable noble gases do not form ions! Group 8A:

Group B elements: Many transition elements have more than one possible oxidation state. Note the use of Roman numerals to show charges Iron (II) = Fe2+ Iron (III) = Fe3+

Naming Cations Two methods can clarify when more than one charge is possible: Stock system – uses roman numerals in parenthesis to indicate the numerical value Classical method – uses root word with suffixes (-ous, -ic) Does not give true value

Naming cations We will use the Stock system.
Cation - if the charge is always the same (like in the Group A metals) just write the name of the metal. Transition metals can have more than one type of charge. Indicate their charge as a roman numeral in parenthesis after the name of the metal (Table 9.2, p.255)

Some of the post-transition elements also have more than one possible oxidation state. Tin (II) = Sn2+ Lead (II) = Pb2+ Tin (IV) = Sn4+ Lead (IV) = Pb 4+

Group B elements: Some transition elements have only one possible oxidation state, such as these four: Silver = Ag1+ Zinc = Zn2+ Cadmium = Cd2+ Nickel = Ni2+

Do not need to use roman numerals for these:
Exceptions: Some of the transition metals have only one ionic charge: Do not need to use roman numerals for these: Silver is always 1+ (Ag1+) Cadmium and Zinc are always 2+ (Cd2+ and Zn2+)

Fig. 2.11

Practice by naming these:
Ca2+ Al3+ Fe3+ Fe2+ Pb2+ Li+ Sodium Ion Calcium Ion Aluminum Ion Iron (III) Ion Iron (II) Ion Lead (II) Ion Lithium Ion

Write symbols for these:
Potassium ion Magnesium ion Copper (II) ion Chromium (II) ion Barium ion Mercury (II) ion K+ Mg2+ Cu2+ Cr2+ Ba2+ Hg2+

Anions are always the same charge
Naming Anions Anions are always the same charge Change the monatomic element ending to – ide F1- a Fluorine atom will become a Fluoride ion.

Cl- N3- Br- O2- Ga3+ Chloride Nitride Bromide Oxide Gallium Ion

Write symbols for these:
Sulfide ion Iodide ion Phosphide ion Strontium ion S2- I- P3- Sr2+

Polyatomic ions are… Groups of atoms that stay together and have an overall charge, and one name. Usually end in –ate or -ite Acetate: C2H3O2- Nitrate: NO3- Nitrite: NO2- Permanganate: MnO4- Hydroxide: OH- and Cyanide: CN-?

Know Table 9.3 on page 257 and your Ion Sheet!!!!!!
Phosphate: PO43- Phosphite: PO33- Ammonium: NH41+ Sulfate: SO42- Sulfite: SO32- Carbonate: CO32- Chromate: CrO42- Dichromate: Cr2O72- (One of the few positive polyatomic ions) If the polyatomic ion begins with H, then combine the word hydrogen with the other polyatomic ion present: H CO → HCO hydrogen + carbonate → hydrogen carbonate ion

Helpful Hints on Oxy-Anions
1. _________: smaller # of oxygen 2. _________: larger # of oxygen Ex. NO3- ____________________________ NO2- ____________________________ SO42- ____________________________ SO32- ____________________________ -ite -ate Nitrate Nitrite Sulfate Sulfite

hypo -ite ClO- ______________________
per -ate ClO4- ________________ “_________” = sulfur replacing an oxygen. Ex. OCN- ____________________________ SCN- ____________________________ SO42- ____________________________ S2O32- ____________________________ Hypochlorite Chlorite -ate Chlorate Perchlorate -thio Cyanate Thiocyanate Sulfate Thiosulfate

A Guide to Determine Whether the –ate Formula is –XO3 or –XO4:
1 2 3 4 5 6 13 14 15 16 17 18 Transition Metals B C N Si P S Cl As Se Br I

A Guide to Determine What the Charge of the Oxy-Anion is:
1 2 3 4 5 6 13 14 15 16 17 18 Transition Metals -3 -2 -1 B C N - 4 -3 -2 -1 Si P S Cl -3 -2 -1 As Se Br -1 I

Writing Ionic Compound Formulas
Example: Barium nitrate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! ( ) Ba2+ NO3- 2 2. Check to see if charges are balanced. Now balanced. Not balanced! = Ba(NO3)2 3. Balance charges , if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance subscripts.

Example: Ammonium sulfate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! ( ) NH4+ SO42- 2 Now balanced. 2. Check to see if charges are balanced. Not balanced! = (NH4)2SO4 3. Balance charges , if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts.

Example: Iron (III) chloride (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Fe3+ Cl- 3 Now balanced. 2. Check to see if charges are balanced. Not balanced! = FeCl3 3. Balance charges , if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts.

Example: Aluminum sulfide (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Al3+ S2- 2 3 2. Check to see if charges are balanced. Now balanced. Not balanced! = Al2S3 3. Balance charges , if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts.

Example: Magnesium carbonate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Mg2+ CO32- 2. Check to see if charges are balanced. They are balanced! = MgCO3

Example: Zinc hydroxide (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! ( ) Zn2+ OH- 2 Now balanced. 2. Check to see if charges are balanced. Not balanced! = Zn(OH)2 3. Balance charges , if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts.

Example: Aluminum phosphate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Al3+ PO43- 2. Check to see if charges are balanced. They ARE balanced! = AlPO4

Naming Ionic Compounds
1. Name the cation first, then anion 2. Monatomic cation = name of the element Ca2+ = calcium ion 3. Monatomic anion = root + -ide Cl- = chloride CaCl2 = calcium chloride

Naming Ionic Compounds
(Metals with multiple oxidation states) some metals can form more than one charge (usually the transition metals) use a Roman numeral in their name: PbCl2 – use the anion to find the charge on the cation (chloride is always 1-) Pb2+ is the lead (II) cation PbCl2 = lead (II) chloride

Things to look for: If cations have ( ), the number in parenthesis is their charge. If anions end in -ide they are probably off the periodic table (Monoatomic) If anion ends in -ate or –ite, then it is polyatomic

Practice by writing the formula or name as required…
Iron (II) Phosphate Stannous Fluoride Potassium Sulfide Ammonium Chromate MgSO4 FeCl3

Nomenclature of Hydrates
A. Hydrate: Ionic compound with ______________ molecules stuck in the ___________ lattice. The water is included in the ____________ and formula. Ex. ZnSO4 7 H20: __________________________ CaCO3 3 H2O: __________________________ Cu2C2O4 2H2O: _________________________ Calcium chloride pentahydrate:______________ water crystal name Zinc sulfate heptahydrate Calcium carbonate trihydrate Copper (I) oxalate dihydrate CaCl2 5H20

Molecular compounds are…
made of just nonmetals smallest piece is a molecule can’t be held together by opposite charge attraction can’t use charges to figure out how many of each atom (there are no charges present)

Molecular compounds are easier!
Ionic compounds use charges to determine how many of each. You have to figure out charges. May need to criss-cross numbers. Molecular compounds: the name tells you the number of atoms. Uses prefixes to tell you the exact number of each element present!

Prefixes (Table 9.4, p.269) 1 = mono- 2 = di- 3 = tri- 4 = tetra-
5 = penta- 6 = hexa- 7 = hepta- 8 = octa-

Prefixes Prefix name Prefix name -ide
9 = nona- 10 = deca- To write the name, write two words: One exception is we don’t write mono if there is only one of the first element. Normally, we do not have double vowels when writing names (oa oo) Prefix name Prefix name -ide

= dinitrogen monoxide (also called nitrous oxide or laughing gas) N2O NO2 Cl2O7 CBr4 CO2 BaCl2 = nitrogen dioxide = dichlorine heptoxide = carbon tetrabromide = carbon dioxide (This one will not use prefixes, since it is an ionic compound!)

Write formulas for these:
diphosphorus pentoxide tetraiodine nonoxide sulfur hexafluoride nitrogen trioxide carbon tetrahydride phosphorus trifluoride aluminum chloride (Ionic compound)

Acids are… Compounds that give off hydrogen ions (H1+) when dissolved in water (the Arrhenius definition) Will start the formula with H. There will always be some Hydrogen next to an anion. The anion determines the name.

Rules for Naming acids: Name it as a normal compound first
If the anion attached to hydrogen ends in -ide, put the prefix hydro- and change -ide to -ic acid HCl - hydrogen ion and chloride ion = hydrochloric acid H2S hydrogen ion and sulfide ion = hydrosulfuric acid

Naming Acids If the anion has oxygen in it, then it ends in -ate or -ite change the suffix -ate to -ic acid (use no prefix) Example: HNO3 Hydrogen and nitrate ions = Nitric acid change the suffix -ite to -ous acid (use no prefix) Example: HNO2 Hydrogen and nitrite ions = Nitrous acid

Naming Acids ____-ide ____-ate ____-ite hydro-___-ic acid
Normal ending ____-ide ____-ate ____-ite Acid name is… hydro-___-ic acid _____-ic acid _____-ous acid

2 additional rules (not mentioned in the book)
If the acid has 1 more oxygen than the –ic acid, add the prefix per- HClO3 (Hydrogen Chlorate) is chloric acid HClO4 would be perchloric acid If there is 1 less oxygen than the ous acid, add the prefix hypo- HClO2 (Hydrogen Chlorite) is chlorous acid, then HClO would be hypochlorous acid

HF H3P H2SO4 H2SO3 HCN H2CrO4

Writing Acid Formulas – in reverse!
Hydrogen will be listed first The name will tell you the anion Be sure the charges cancel out. Starts with prefix hydro?- there is no oxygen, -ide ending for anion no prefix hydro? -ate anion comes from –ic ending -ite anion comes from –ous ending

Write formulas for these:
hydroiodic acid acetic acid carbonic acid phosphorous acid hydrobromic acid

Summary of Naming and Formula Writing
For naming, follow the flowchart- Figure 9.20, page 277 For writing formulas, follow the flowchart from Figure 9.22, page 278

Helpful to remember... 1. In an ionic compound, the net ionic charge is zero (criss-cross method) 2. An -ide ending generally indicates a binary compound 3. An -ite or -ate ending means there is a polyatomic ion that has oxygen 4. Prefixes generally mean molecular; they show the number of each atom

• Compounds Ionic Covalent Binary Ternary Acids Binary Ternary
(Metal / Non-metal) Binary Ternary Acids Contain H+ Binary Ternary w/ oxygen Hydrates Non-metal / Non-metal Uses prefixes, -ide I2O7 Diiodine heptoxide 2 elements -ide Roman numeral (if needed) ie. Calcium chloride CaCl2 3 or more elements Anion is named Roman numerals (if needed) ie. Calcium carbonate CaCO3 No oxygen Hydro__ic acid ie, Hydrochloric acid HCl -ate—ic acid H2CO3 Carbonic -ite---ous acid H2SO3 Sulfurous w/ H2O Uses prefixes ie. Calcium chloride dihydrate CaCl H2O •

Ion Bingo Set 1 (Choose 5 each for your blank sheet and mix them up)
Cations (Left side) Mg Pb (II) Li Ca K Al NH4 Anions (Top) CO3 NO2 PO4 S Br C2O4 Cl

Ion Bingo Set 2 (Choose 5 each for your blank sheet and mix them up)
Cations (Left side) Fe (III) Zn Cs Sr Ni Ba Cu (I) Anions (Top) SO3 ClO2 SO4 O F C8H4O4 OH

Ion Quiz #1 Version A Version B Sulfate Rubidium ion Magnesium ion
Charges of Lead Carbonate Phosphide Charges of Mercury Charge of silver cyanide Nitrate Aluminum ion Version B Rubidium ion Hydroxide Charges of Chromium Sulfide sulfite Charges of Tin Nitrate Bromide Charge of Zinc Chlorate

Ion Quiz #2 Ver. A Ver. B AsO33- IO2- Bromate NO2- OH- O22- Phosphite
Hg22+ Charge(s) of Mn Ammonium SO32- IO4- OCN- Ver. B IO2- NO2- O22- Cyanide Hg2+ Charge(s) of Pb SO42- BO33- Carbonate ClO-

Ion Quiz #3 Ver. A Ver. B AsO33- C2H3O2- Charge of Cadmium
NH4+ Charge(s) of Silver S2O32- Dichromate Hypochlorite MnO4- Sulfate Oxalate C2H3O2- Charge(s) Manganese OH- Charge(s) of Copper SO32- Chromate Perchlorate CO32- Monohydrogen Phosphate Periodate

Ion Quiz # 1 Key (Per. 0/1) Ver. A Ver. B Rb+ SO42- OH- Mg2+ +1/+2
PO43- +2/+4 NO3- Br- +2 SO32- SO42- Mg2+ +2/+4 CO32- P3- +2/+3 +1 CN- NO3- Al3+

Ion Quiz # 1 Key (Per. 2) Ver. A Ver. B Rb+ SO42- OH- Mg2+ +2/+3 +2/+4
PO43- +2/+4 NO3- Br- Zn2+ ClO3- SO42- Mg2+ +2/+4 CO32- P3- +1/+2 +1 CN- NO3- Al3+

Ion Quiz # 1 Key (Per. 3/4) Ver. A Ver. B Rb+ SO42- OH- Mg2+ +2/+3
+2/+4 NO3- Br- Zn2+ (2+) ClO3- SO42- Mg2+ +2/+4 CO32- P3- +1/+2 +1 CN- NO3- Al3+

Ion Quiz # 2 Key Ver. A Ver. B Iodite Arsenite Nitrite BrO3- Peroxide
CN- Mercury (II) +2/+4 Sulfate Borate CO32- Hypochlorite Arsenite BrO3- Hydroxide PO33- Mercury (I) +2/+3 NH4+ Sulfite Periodate Cyanate

Ion Quiz #3 Key Ver. A Ver. B Arsenite Acetate +2 +2/+3 Ammonium Ion
+1 Thiosulfate Cr2O72- ClO- Permanganate SO42- C2O42- Acetate +2/+3 Hydroxide +1/+2 Sulfite CrO42- ClO4- Carbonate HPO42- IO4-

Unit 4 “Chemical Names and Formulas”

Similar presentations

Presentation on theme: "Unit 4 “Chemical Names and Formulas”"— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

Unit 4 “Chemical Names and Formulas”

Similar presentations

Presentation on theme: "Unit 4 “Chemical Names and Formulas”"— Presentation transcript:

Similar presentations

About project

Feedback