Download presentation
Presentation is loading. Please wait.
Published byEverett Poole Modified over 8 years ago
1
Carrier Air Wing ELEVEN EAWS Common Core Tutorial Created by: NCC(AW) M. J. WILSON Command Career Counselor
2
First Aid Fundamentals
3
State the three objectives of first aid
Save Life Prevent Further Injury Prevent Infection
4
State the methods of controlling bleeding
Direct Pressure Elevation Pressure points Tourniquet (last resort)
5
State the location of principal pressure points on each side of the body (10)
Temple Jaw Neck Collar Bone Inner Upper Arm Wrist Upper Thigh Groin Knee Ankle
6
Describe the symptoms of shock
Vacant / Lackluster Eyes Shallow or Irregular Breathing Cold, Pale Skin Nausea Weak or Absent Pulse Feeling Faint
7
State the treatment for shock
Lay victim down with feet elevated 6” - 12” Cover victim to maintain body heat
8
Describe the three classifications of burns
First Degree- mildest, producing redness, increased warmth, tenderness and mild pain Second Degree- red and blistered skin; severe pain Third Degree- destroyed tissue, skin and bone in severe cases. Pain maybe absent due to nerve endings being destroyed
9
Describe the symptoms for heat exhaustion
Skin is cool, moist, and clammy Pupils are dilated Normal or Subnormal body temperature Sweating profusely
10
Discuss treatment for heat exhaustion
Move the victim to cool or air conditioned area Loosen clothing Apply cool wet cloths to head, groin and ankles Fan victim; do not allow victim to become chilled If conscious, give a solution of one teaspoon salt dissolved in a liter of cool water Transport to Medical Facility
11
Discuss the symptoms for heat stroke
Hot and/or dry skin Uneven pupil dilation Weak, rapid pulse
12
Discuss treatment for heat stroke
Reduce heat immediately by dousing the body in cold water Apply wet, cold towels to the body around the shoulders and neck. Additional packs can be placed on ankles and groin area Move victim to coolest possible place Maintain an open airway
13
State the difference between and “open” and “closed” fracture
Closed (Simple) fractures are internal and do not break the skin Open (Compound) fractures cause an open wound in the tissue or skin
14
State the steps in rescuing a person from electrical shock
Turn off the current immediately If unable to secure power, remove victim using a non-conductive object (dry broom handle, oar, board, etc) Administer artificial ventilation Check for pulse and start CPR if necessary
15
Describe the method for clearing an obstructed airway
Stand behind victim and wrap your arms around the victim’s waist. Grasp your wrist and place thumb side of your fist against the victim’s abdomen above the navel and just below the rib cage. Give 4 quick upward thrusts to the victim
16
Define hypothermia General cooling of the whole body caused by exposure to low or rapidly falling temperature, cold moisture, snow or ice
17
Give symptoms of hypothermia
Slow and shallow breathing Faint or undetectable pulse Body tissues feel semi-rigid, and the arms and legs may feel stiff
18
Discuss treatment for hypothermia
Wrap patient in warm blankets and place in a warm room Do not give hot drinks or other stimulants until he/she regains consciousness Get medical attention immediately
19
Discuss the two types of frostbite and treatment
Superficial- Ice crystals form in the upper skin layers after exposure to temperatures of 32 degrees or lower Deep Frostbite- Ice crystals form in the deeper tissues after exposure to a temperature of 32 degrees or lower. Treatment- Get victims indoor, re-warm the area by placing them in warm water or with hot water bottles. Never rub frostbite areas and seek medical attention immediately
20
General Safety Fundamentals
21
Define the purpose of the Naval Aviation Safety Program
Preserve human and material resources Material resources include naval aircraft, ships, facilities and weapons
22
Who is the principal advisor to the CO on all aviation safety matters
Aviation Safety Officer
23
Who is the principal advisor to the CO on all ground safety matters?
Ground Safety Officer
24
Who must comply with established safety standards?
All Hands
25
List factors that can contribute to aviation mishaps
Human Error Maintenance & Support Factors Administrative & Supervisory Factors Material failures or malfunctions Environmental factors
26
Define a Class A mishap Resulting in property damage of $ 1,000,000,000 or more Or an injury or occupational illness resulting in a fatality or permanent total disability
27
Define a Class B mishap Resulting in property damage is $200,000 or more, but less than $1,000,000,000 Or an injury or occupational illness resulting in permanent partial disability; or three or more personnel are inpatient hospitalized
28
Define a Class C mishap Property damage is $10,000 or more, but less than $200,000 Or a non-fatal injury that causes any loss of time beyond the day or shift on which it occurred; or a non-fatal illness or disease that causes loss of time from work or disability at any time
29
Define a Class D mishap Property damage is less than $10,000
Or a non-fatal injury (no lost time or first aid case) that does not meet the criteria of a Class C mishap
30
State the objective of the Aviation Gas-Free Engineering Program (AVGFE)
To ensure a safe environment is maintained when working on aeronautical equipment fuel systems
31
AVGFE technician shall have what qualifications and training
Must be a Quality Assurance Representative (QAR) or Collateral Duty Quality Assurance Representative (CDQAR) Must be a graduate of the AVGFE course
32
Explain the hazards of Radio Frequency energy
Can cause life-threatening electric shock, burns, biological changes, and cataracts. Can cause premature or unwanted activation of electro-explosive devices in ordnance
33
Discuss the concept of Operational Risk Management (ORM)
Systematic, decision-making process used to identity and manage hazards that endanger naval resources.
34
State the 5 steps or ORM Identify hazards Assess hazards
Make risk decisions Implement controls Supervise
35
Chain of Command Fundamentals
36
What are the two chain of commands for operating forces
Operation- From the President, through the Secretary of the Navy to a commander of a unified or specified command Administrative- through the Secretary of the Navy and the Chief of Naval Operations to the operating forces
37
What is a unified command
Composed of elements of two or more services. It has a broad continuing mission, and has a single commander. Examples: Atlantic Command Pacific Command European Command Southern Command Central Command Readiness Command
38
Name the three Fleet Commanders
Commander, U.S. Pacific Fleet Commander, U.S. Atlantic Fleet Commander, U.S. Naval Forces Europe
39
Which fleets fall under each commander
Atlantic Fleet = 2nd Fleet Pacific Fleet = 3rd & 7th Fleets Europe = 6th Fleet
40
Who is the Secretary of the Navy?
Honorable Gordon R. Englund
41
Who is the Chief of Naval Operations?
Admiral Vern Clark
42
Who is the MCPON MCPON Terry Scott
43
Who is the PACFLT Master Chief?
Fleet Master Chief Rodriguez
44
Who is our Force Master Chief?
Force Master Chief Keith Goosby
45
How many personnel must be assigned to rate a Command Master Chief?
250
46
State the 6 areas of Naval doctrine
Naval Warfare Naval Intelligence Naval Operations Naval Logistics Naval Planning Naval Command and Control
47
On what day was the U.S. Navy born?
October 13th, 1775
48
State the 3 levels of war Tactical- involves individual engagements
Operational- concerns forces collectively in a theater Strategic- focuses on supporting national goals
49
Discuss the importance of the battle of Coral Sea as it relates to naval aviation
The first carrier vs. carrier battle. The USS Lexington was sunk and the USS Yorktown was damaged.
50
Discuss the importance of the battle of Midway as it relates to naval aviation
Turning point in the Pacific War Admiral Nimitz positioned 3 carriers out of reconnaissance range and after Japanese fighters left for Midway, US forces attacked sinking 3 Japanese carriers the first day and 1 on the second day.
51
Discuss the significance of May 8th, 1911, as it applies to naval aviation
May 8th is considered to be the birthday of naval aviation. It was the date the first two aircraft were ordered
52
What is the name of the first aircraft carrier
USS Langley
53
What was the first jet powered naval aircraft?
FJ-1 Fury
54
Who was the first naval aviator in space
Alan Shepard (May 5th, 1961)
55
What two aviation ratings do not start with the letter A?
PR & PH
56
Aviations Electrician’s Mate (AE)
Which aviation rate maintains, adjusts, and repairs aircraft electrical power generating and converting systems; lighting, control and indicating systems? Aviations Electrician’s Mate (AE)
57
Aviation Fundamentals
58
Describe the following terms pertaining to motion: Inertia; Acceleration; Speed; and Velocity
Inertia- willingness of an object to remain at rest or continue in motion unless acted upon by an outside force Acceleration- The rate of change of the speed and or velocity of matter with time Speed- The rate of movement or motion in a given amount of time Velocity- The quickness or speed of an object in a given time and direction
59
Define Newton’s First Law of Motion
An object at rest will remain at rest, or an object in motion will remain in motion at the same speed and direction, until acted upon by an outside force
60
Define Newton’s Second Law of Motion
States that if an object moving with uniform speed is acted upon by an external force, the change in motion, or acceleration, will be directly proportional to the amount of force and inversely proportional to the mass of the object being moved.
61
Define Newton’s Third Law of Motion
States that for every action there is an equal and opposite reaction
62
Define Bernoulli’s Principal
States that when a fluid is flowing through a tube reaches a constriction or narrowing of the tube, the speed of the fluid passing through the constriction is increased and its pressure decreased
63
Discuss the following wind warnings: Small Craft; Gale; Storm
Small Craft- 33 knots or less, of concern to small craft Gale- 34 – 47 knots Storm- 48 knots or greater
64
Discuss the following tropical cyclone warnings: Tropical Depression; Tropical Storm; Hurricane/Typhoon; Thunderstorm/Tornado Tropical Depression- 33 knots or less Tropical Storm- 34 – 63 knots Hurricane/Typhoon- 64 knots or greater Thunderstorm- Small scale storm accompanied by lighting and thunder Tornado- Violently rotating column of air in the form of a funnel to 250 knots
65
Discuss the following warnings: Thunderstorm; Severe Thunderstorm; Tornado
Thunderstorm- Thunderstorms within 3 miles of the airfield Severe Thunderstorm- Wind gusts to 50 knots or greater and/or ¾ inch in diameter or greater hail is forecast for the warning area Tornado- Tornados have been sited or detected on RADAR in or adjacent to the warning area
66
What is lift? The force that acts, in an upward direction, to support the aircraft in the air
67
What is Weight? The force of gravity acting downward on the aircraft and everything on the aircraft
68
What is Drag? The force that tends to hold the aircraft back.
69
What is Thrust? Force developed by the aircraft’s engine, and it acts in the forward direction.
70
What is the Longitudinal axis?
Imaginary reference line running down the center of the aircraft between the nose and the tail. The axis about which roll occurs.
71
What is the Lateral axis?
Imaginary reference line running parallel to the wings and about which pitch occurs
72
What is the Vertical axis?
Imaginary reference line running from the top to the bottom of the aircraft. The movement associated with this axis is yaw
73
State the three primary movements of aircraft about the axis
Pitch- Movement about the lateral axis. Up and down motion of the nose. Yaw- Movement about the vertical axis. Drift right or left movement of the nose. Roll- Movement about the longitudinal axis. Movement of the wingtips one up and one down.
74
Identify and state the purpose of the primary flight controls for fixed wing aircraft
Ailerons- provide control about the longitudinal axis (Roll) Elevators- provide control about the lateral axis (Pitch) Rudder- provides control about the vertical axis (Yaw)
75
State the purpose of the: flaps; spoiler; speed brakes
Flaps- provides extra lift for the aircraft, reducing landing speed. Spoiler- used to decrease wing lift by destroying the smooth air flow over the wing. Speed brakes- moveable control surfaces used for reducing speed.
76
State the purpose of the: slats; horizontal stabilizer; vertical stabilizer
Slats- moveable control surfaces attached to the leading edge of the wing. Used to improve the lateral control handling. Horizontal Stabilizer- Provides stability of the aircraft about its lateral axis. Vertical Stabilizer- Provides stability of the aircraft about its vertical axis. Usually serves as the base to which the rudder is connected.
77
Explain the term angle of attack
The angle at which a body, such as an airfoil or fuselage, meets a flow of air. Defined as the angle between the chord line of the wing (an imaginary straight line from the leading edge to trailing edge of the wing) and the relative wind. Measured in “units” as opposed to degrees.
78
Explain the term autorotation
Method of allowing a helicopter to land safely from altitude without using engine power by making use of the reversed airflow up through the rotor system to reduce the rate of descent.
79
State the components of a basic hydraulic system
Reservoir – holds the supply of fluid Pump- provides fluid flow Tubing- transmits fluid Selector valve- directs the fluid flow Actuating unit- converts the pressure into useful work
80
Describe and explain the purpose of the main landing gear components
Shock Strut Assembly- Absorbs the shock that otherwise would be transmitted to the airframe Tires- Allows roll and provides traction during takeoff and landing Wheel Brake Assembly- Used to slow / stop the aircraft, and prevent the aircraft from rolling while parked Retraction/Extending Mechanism- The hardware to electrically or hydraulically extend / retract the landing gear Side Struts / Supports- Provides lateral strength/support for the landing gear
81
State the safety precautions used when service aircraft tires
Always approach the tires from fore and aft When inflating, stand off to the side Deflate when removing the tire from the aircraft
82
State the 5 basic section of a jet engine
Intake- allows outside air to enter the engine Compressor- a series of rotating blades and stationary vanes that provides high-pressure air to the combustion chamber Combustion Chamber- where fuel enters and combines with air Turbine- drives the compressor and accessories by extracting energy and pressure from combustion gases Exhaust- eliminates turbulence in the emerging jet, thereby giving maximum velocity
83
Describe the following engine systems: Turbojet; Turbo shaft; Turboprop; Turbofan
Turbojet- Projects a column of air to the rear at an extremely high velocity to propel the aircraft Turbo shaft- Delivers power through a shaft to drive something other than a propeller Turboprop- Converts the majority of the gas energy into mechanical power to drive a propeller Turbofan- Converts gas energy into mechanical power to drive a duct-enclosed axial-flow fan
84
State the purpose of the afterburner
Used during takeoff and maneuvering to boost the normal thrust rating of a gas turbine engine through additional burning of the remaining unused air in the exhaust section
85
List and explain the characteristics and uses of: JP4; JP5; and JP8
JP4- Flame spread rate of feet per minute and a flashpoint of –10 degrees F. Never used on ships JP-5- Flame spread rate of 100 feet per minute and a flashpoint of 140 degrees F. Used aboard naval vessels JP8- Flame spread rate of 100 feet per minute and a flashpoint of 100 degrees F. Never used on ships
86
List the 3 hazards associated with jet fuel
Explosion of fuel fumes Vapor inhalation Toxic contact with skin or eyes
87
Describe the symptoms of fuel vapor inhalation
Nausea Dizziness Headaches Note: Fuel Vapor inhalation can cause death
88
Explain the purpose of the Auxiliary Power Unit (APU)
Furnish electrical power when engine drive generators are not operating and external power is not available Provides compressed air for air conditioning and pneumatic engine starting Makes the aircraft independent of the need for ground power
89
Identify the reasons and methods of Non-Destructive Inspection (NDI)
Provides 100% sampling with no affect to the use of the part or system being inspected Methods: visual, optical, liquid penetrate, magnetic particle, eddy current, ultrasonic, and radiographic
90
Discussing icing and its effects on performance
Ice on the airframe decreases lift and increases drag, weight, and stalling speed. Ice on the exterior movable surfaces effects control. On propellers it decreases efficient and increases power requirements. Engine icing can cause loss of power.
91
What is the purpose of the Pitot-static?
Using the principals of a barometer it consist of the pitot-static tube and 3 indicators. The 3 indicators are the altimeter, airspeed indicator, and rate-of-climb indicator.
92
What is the purpose of the Airspeed Indicator?
Displays the speed of the aircraft in relation to the air in which it is flying.
93
What is the purpose of the Altimeter?
Shows the height of the aircraft above sea level
94
What is the purpose of the Rate-of-climb indicator?
Shows the rate at which an aircraft is climbing or descending
95
What is the purpose of the Attitude Indicator
Shows the pilot the relative position of the aircraft compared to the earth’s horizon
96
What is the purpose of the Turn and Bank Indicator?
Shows the correct execution of a turn and bank. Also show the lateral attitude of the aircraft in straight flight.
97
What is the purpose of the Navigation Systems?
Direct, plow and control the course or position of the aircraft
98
What is the purpose of Identification Friend or Foe (IFF)
Electronic system that allows a friendly craft to identify itself automatically before approaching near enough to threaten the security of other naval units
99
What is the purpose of Radio Detection and Ranging (RADAR)
Radio device used to detect objects at distances much greater than is visually possible.
100
What is the purpose of the Magnetic (standby) Compass?
A direct-reading magnetic compass mounted in the instrument panel. Provides a back up to main compass
101
What is the purpose of Communication Systems?
Equipment that allows for communication between aircraft,ships, and other stations and does not require interconnecting wires between the sending and receiving stations
102
What is the definition and purpose of a bomb?
Any weapon other than a torpedo, mine, rocket or missile, dropped from an aircraft. Free falling explosive weapon that may be unguided or “smart” or guided Designed for release over enemy targets to reduce and neutralize the enemy’s potential war potential by explosion, fire, nuclear reaction, etc
103
What is the definition of a Rocket?
A weapon containing an explosive section and a propulsion section that is unable to change its direction of movement once fired
104
What is the definition of a Missile?
A vehicle containing an explosive section, propulsion section and a guidance section that is able to change direction or movement after being fired.
105
What is the definition and purpose of a Mine?
Underwater explosive put into position by ships, submarines, or aircraft that explodes only when a target comes near or in contact with it. Primary objective is to effectively defend or control vital straits, ports, convoy anchorages or seaward coastal barriers
106
What is the definition and purpose of a Torpedo?
Self-propelled underwater missile used against surface and underwater targets. They are designed to search, detect, attack and destroy submarines and ships
107
Explain the purpose of a Circuit Breaker and a Fuse
Circuit Breaker- protective device that opens a circuit when the current exceeds a predetermined value. Can be reset Fuse- Protective device inserted in-line with a circuit, designed to melt or break when current is increased beyond a specified value. Cannot be reset
108
Explain the components of Ohm’s Law (E=IR)
Voltage (E)- the driving force behind current. Current(I)- the flow of electrons Resistance (R)- opposing force to the flow of electrons.
109
Airfield Familiarization
110
Define aircraft handling
A general term that describes any movement of aircraft or associated equipment
111
State the purpose of standard aircraft taxi signals
Used by all branches of the Armed Forces so that there will be no misunderstanding when signalman of one service is signaling a pilot of another
112
State the vehicle speed limits on the flight line and around aircraft
Within 50 ft of aircraft- 5 mph On runways, taxiways, parking ramps, and working areas- 10 mph
113
What is the maximum towing speed of an aircraft
As fast as the slowest walker
114
Name the 4 categories of tie down requirements
Initial Intermediate Permanent Heavy Weather
115
What is the purpose of emergency shore based recovery equipment
To arrest an aircraft and stop it in the shortest distance in emergency situations such as blown tire, landing gear not down, etc
116
What is the purpose of the MA-1A overrun barrier
Designed to stop aircraft not equipped with tail hooks, but the aircraft must have a nose wheel.
117
What is the minimum Personal Protective Equipment (PPE) required during routine maintenance
Work area should be assessed for hazards and each worker given and briefed on the proper PPE for that area
118
What is the minimal PPE required during flight operations
Cranial Jersey (appropriate color) Goggles Sound Attenuators Flight Deck Shoes Flotation Gear Survival Light Whistle
119
Identify the safety hazard areas associated with intakes
Suction is the ever present hazard when engines are in operation. Personnel should stand clear and ensure debris is kept clear
120
Identify the safety hazard areas associated with exhaust
The 2 most serious hazards are high gas temperatures and high velocity During engine start up excess fuel can accumulate in the tailpipe causing flames to shoot out
121
What safety precaution should personnel use with working around propellers
Personnel should NOT approach or depart an aircraft with the propellers turning.
122
What safety precaution should personnel observe when working around rotor blades
Personnel should NOT approach or depart a helicopter while the rotors are being engaged or disengaged
123
What safety precautions should be observed when working around hot brakes?
Never face the side of the wheel, as a tire explosion will travel along the line of the axle Always approach the wheel from forward or aft
124
Explain the significance of the runway numbering system
Runways are normally numbered in relation to their magnetic heading rounded off to the nearest 10 degrees. If there are two or three parallel runways, they will be designated as Left (L), Right (R), or Center (C)
125
Explain the significance of Threshold Markings
Runways 200 feet wide have 10 stripes marking the landing threshold, each 12 wide by 150 feet long that designate the landing area For runways less than 200 feet wide, the markings cover the width of the runway less 20 feet on both sides.
126
Explain the significance of the Airfield Lighting System
Install to provide visual guidance at night and under low visibility conditions Systems are standardized by the Air Force, Navy and FAA to present a uniform appearance. When shut down the following lights remain on: Navigable airspace obstruction lights and rotating beacons
127
Explain the significance of the arm/dearm areas
An area where ordnance is changed from a state of safe condition to a state of readiness
128
Explain the significance of the Overrun area
Provides a reasonably effective deceleration area for aborting or overshooting aircraft. Some are paved and some have yellow chevrons across them
129
Explain the significance of the Parking Apron
Used for parking, servicing and loading aircraft
130
Explain the purpose of the; Wind Indicator; Airfield Rotating Beacon; Tower Visual Communications
Wind Indicator- Provides a method of prompt issuance of wind directions and velocities to pilots Used to identify the airport’s location, rotation is clockwise when viewed from above Coordination device between the radar controller and the control tower. Provides a sequence of lights and switches that supplement other circuits and serve to reduce voice contact between the two
131
What is the flashing rate on a airfield rotating beacon?
12 to 15 flashes per minute
132
What is TACAN? Tactical Air Navigation system- uses a bearing determining system to determine aircraft position and distance from the TACAN station. Primary navigation aid used by carrier based aircraft
133
Explain the purpose of Crash/Rescue
Serves to effect rescue of personnel from damaged aircraft on the flight deck, fight fires, make minor emergency repairs to the flight deck
134
What is the compass calibration pad
A magnetically quite area where the aircraft compass is calibrated. A minimum of 1 area is provided at every airport
135
Explain the significance of the Liquid Oxygen (LOX) exchange area
Designated area used to service aircraft which require LOX
136
LOX has a temperature and expansion rate of what
Temperature degrees F Expansion Rate
137
List the safety concerns when working in the LOX exchange area
Area must be kept free from flammable materials such as wood, cloth, paper, oil, or kerosene
138
Naval Aircraft
139
Identify the following types of squadrons: HC, HCS, HM, HS, HSL, HT
HC- Helicopter Combat Support HCS Helicopter Combat Support Special Squadron (Combat rescue) HM- Helicopter Mine Countermeasures HS- Helicopter Antisubmarine HSL- Helicopter Antisubmarine Light HT- Helicopter Training
140
Identify the following types of squadrons: VAQ, VAW, VC, VF, VFA, VMFA, & VP
VAQ- Tactical Electronic Warfare VAW- Carrier Airborne Early Warning VC- Fleet Composite (Utility & Air Services) VF- Fighter VFA- Strike Fighter VMFA- Marine Fighter Attack VP- Patrol
141
Identify the following type of squadrons: VQ, VR, VRC, VS VT, VX/VXE
VQ- Fleet Air Reconnaissance VR- Aircraft Logistics Support VRC- Carrier Logistics Support VS- Carrier Antisubmarine Warfare VT- Training VX- Test and Evaluation VXE- Antarctic Development
142
What are the missions of the following aircraft: C-2, EA-6B, E-2, F/A-18, F-14, HH-60F/H
C-2- Carrier Logistics Support EA-6B- Tactical Electronic Warfare E-2- Carrier Early Airborne Warning F/A-18- Fighter/Attach F-14- Fighter HH-60F/H- Anti-Submarine Warfare
143
Aviation Capable Ships
144
Identify the following class of ships: AE, AD, AFS, AS, AO, & AOE
AE- Ammunition Ship AD- Destroyer Tender AFS- Combat Stores Ship AS- Submarine Tender AO- Oilier AOE- Oilier / Ammunition Support Ship
145
Identify the following class of ships: CG, CV/CVN, DD/DDG, & FFG
CG- Guided Missile Cruiser CV- Air Craft Carrier (Non-Nuclear) CVN- Air Craft Carrier (Nuclear) DD- Destroyer DDG- Guided Missile Destroyer FFG- Guided Missile Frigates
146
Identify the following class of ships: LCC, LHA, LHD, LPD, LPH, LSD, MCS
LCC- Amphibious Command Ship LHA- Amphibious Assault Ship LHD- Amphibious Warfare Ship LPD- Amphibious Transport Dock LPH- Amphibious Assault Ship LSD- Dock Landing Ship MCS- Mine Countermeasures Support Ship
147
Other Ships and Submarines
148
Identify the following classes of ships: ATF, ARS, ASR, AR, MCM, MHC, PC, SSBN, SSN
ATF- Fleet Ocean Tug ARS- Rescue and Salvage Ship ASR- Submarine Rescue Ship AR- Repair Ship MCM- Mine Countermeasures Ship MHC- Coastal Mine Hunters PC- Patrol Craft SSBN- Ballistic Missile Submarine (Nuclear) SSN- Submarine (Nuclear)
149
Chemical, Biological & Radiological Warfare (CBR)
150
Define the term Chemical Warfare
Intentional use of lethal or non-lethal chemical agents to produce casualties, harass or temporarily incapacitate and demoralize personnel, or contaminate or destroy areas, equipment or supplies.
151
Define the term Biological Warfare
Intentional use of living organisms to disable or destroy people or their domestic animals, to damage crops, and/or to deteriorate their supplies
152
Define the term Radiological warfare
The deliberate use of radiological weapons to produce injury and death to man
153
Describe the purpose of the MCU-2/P
Provides protection for the face, eyes, nose, throat, and lungs. Provides filtration of CBR agents. The mask does not provide oxygen and should not be used against smoke or toxic gases such as carbon monoxide
154
Describe the chemical protective over-garment
Treated with chemicals that neutralize blister agent vapors and spray, but do not stop penetration by liquid agents. Consists of trousers, hip length jumper with attached hood, and associated gloves and foot coverings.
155
Describe wet-weather clothing
Clothing that protects ordinary clothing and skin from penetration by liquid agents and radioactive particles. Includes a parka, trousers, rubber boots, and gloves
156
Discuss the use of Atropine / 2 Pan Chloride auto injector
Used for nerve agent casualties Issued in automatic injectors for self-aid If contaminated by nerve agent injections are give in the thigh
157
Discuss the two types of dosimeters
IM-143- self-reading pocket dosimeter about the size of a pen. Measures exposure to radiation over a period of time DT-60- high-range casualty dosimeter that must be placed in a special computer to determine exposure level of gamma radiation
158
List the 4 types of chemical casualty agents and their symptoms
Chocking- dryness of throat, coughing, tightness across chest, headache, nausea and watery eyes Nerve- runny nose, tightness of chest with difficulty breathing, contraction of pupils, nausea, cramps, headache, coma, convulsion Blood- Breathing becomes deep within a few seconds, violent convulsions over 20 to 30 seconds, stops breathing regularly after 1 minute, heart stops a few minutes after exposure Blister- redness of skin, intense itching, blisters, stiffness, throbbing pain and swelling
159
Describe a high altitude air burst
Point of detonation is above 100,000 feet Causes widespread disturbances in the ionosphere effecting radio waves and other electromagnetic radiations
160
Describe an air burst Develops a huge fireball that does not touch the earth’s surface. All materials within the fireball are vaporized. Vapors condense creating a highly radioactive cloud.
161
Describe a surface burst
Develops a fireball that does touch the earth’s surface. Vast amounts of surface material is vaporized and pulled into the cloud and then returns to the earth as fallout
162
Describe a shallow underwater burst
Fireball is formed but is normally not visible. Explosion creates a large bubble or cavity upon rising to the surface, expels steam, gases, and debris into the air. Water forms in a column that may reach several thousand feet. A highly destructive shock wave is formed and large wave are created.
163
Describe a deep underwater burst
Same a shallow underwater burst, but more of the impact is absorbed by the deep ocean currents contaminating more water
164
Describe blast effect Injuries result from direct action of the air shock wave on the body. Secondary blast injuries are caused by collapsing structures and debris flung about by the blast
165
Describe flashburn/blindness
Primary burns are a direct result of thermal radiation. Secondary burns result from fires caused by the explosion. Blindness is caused by the intense flash of light and can last between 15 – 45 minutes.
166
Describe radiation hazards of a nuclear explosion
Body is contaminated by Alpha & Beta particles and Gamma rays. The greatest concern is residual radiation .
167
Describe the Electromagnetic Pulse of a nuclear blast
The pulse lasts for only fractions of a second and can induce large currents in cables and long-lead wires causing the burn out of electronic or electrical equipment.
168
Define and discuss the Mission Oriented Protective Posture Level I
Suspected Attack Gas masks are issue to all hands and kept at battle stations. An inventory of stowed chemical/biological defense equipment is conducted.
169
Define and discuss the Mission Oriented Protective Posture Level II
Possible attack Gas masks are carried by each person onboard. Preposition decontamination supplies at DECON stations. Set material condition ZEBRA (modified)
170
Define and discuss the Mission Oriented Protective Posture Level III
Probable attack New filters are installed on masks. Don protective overgarment. Stow personal decontamination kit in carrier. Go to general quarters and set material condition ZEBRA. Post detection and monitoring teams and activate counter measure wash down system intermittently.
171
Define and discuss the Mission Oriented Protective Posture Level IV
Imminent attack Don gas mask and secure the hood. Continuous monitoring of detection equipment. Set material condition Circle William and activate wash down system continuously.
172
Naval Air Training and Operating Procedures Standardization (NATOPS) Fundamentals
173
What instruction covers the NATOPS General Flight and Operating Instructions
OPNAVINST Q
174
What is the purpose of NATOPS?
Positive approach towards improving combat readiness and achieving a substantial reduction in aircraft mishaps. Prescribe general flight and operating instructions and procedures applicable to the operation of all naval aircraft and related activities
175
Explain general aircraft pre-start procedures
Wheels shall be chocked and parking brake set Where applicable, install intake screens Inspect area for FOD When engine is started by non-pilot personnel the plane shall be tied down Adequate fire extinguishing equipment shall be stationed in the immediate vicinity
176
What is the meaning of “WARNING” as applied to NATOPS
An operating procedure, practice or condition that may result in injury or death if not carefully observed or followed.
177
What is the meaning of “Caution” as applied to NATOPS
An operating procedure, practice, or condition, that may result in damage to equipment in not carefully observed or followed.
178
What is the meaning of “NOTE” as applied to NATOPS
An operating procedure, practice or condition that must be emphasized
179
What is the meaning of “SHALL” as applied to NATOPS
Means a procedure that is mandatory
180
What is the meaning of “SHOULD” as applied to NATOPS
Means a procedure that is recommended
181
What is the meaning of “MAY” as applied to NATOPS
“May” and “need not” mean the procedure is optional
182
What is the meaning of “WILL” as applied to NATOPS
Indicates futurity and never indicates any degree of requirement for application of a procedure
183
What is the purpose of a NATOPS evaluation?
Intended to evaluate individual and unit compliance by observing and grading adherence to NATOPS procedures.
184
What is the purpose of the Naval Flight Records Subsystem (NAVFLIRS)
Provides a standardized flight activity data collection system. NAVFLIRS is the single-source document for recording flight data and is applicable in specific areas to aircraft simulators. Prepared for each attempt at flight. OPNAV 3710/4
185
State the purpose of master flight files
The only official flight record of naval aircraft and shall be maintained IAW OPNAVINST
186
Explain the aircraft visual identification system for COMNAVAIRLANT
First character shall be A through M; second character shall be A through Z
187
Explain the aircraft visual identification system for COMNAVAIRPAC
First character shall be N through Z; second character A through Z
188
Explain the aircraft visual identification system for CNATRA
First character shall be A through G; there is no second character
189
General Administration
190
Discuss the scope of a CO’s authority & responsibility and what establishes it
CO is ultimately responsible for those under his/her command and their actions CO’s authority & responsibility are established by U.S. Navy Regulations, general orders, customs, and tradition
191
What are the Executive Officer’s primary responsibilities
The XO is primarily responsible for the organization, performance of duty, and good order and discipline of the entire command.
192
What policy areas is the Command Master Chief mainly involved with
Policies pertinent to moral, welfare, job satisfaction, discipline, utilization and training of enlisted personnel
193
What does CMEO stand for and what are program is the individual responsible for
Command Managed Equal Opportunity Officer Provides equal opportunity training to the command, including the education and emphasis on giving equal opportunity to all members regardless of race, creed, or religious preference
194
The position of OMBUDSMAN is a link between who?
Command and Families
195
What are the 4 major areas the Drug and Alcohol Program Advisor should be focused on?
Education Rehabilitation Identification Enforcement
196
Discuss the purpose of personnel counseling
To discuss personal problems that may require help to solve. Key element is to recognize the scope of the problem and determining if specialists such as a chaplain, medical officer, or legal maybe be needed.
197
Discuss the purpose of performance counseling
Counsel personnel on a regular basis to let them know how they are performing and what areas need improvement
198
Describe the effects of the evaluation on the type of discharge
Members must maintain an average of 2.7 and 3.0 in conduct average, otherwise a “general” discharge is awarded
199
Describe the effects of the evaluation on advancement
Single most important factor for determining who will be selected for advancement 4.0 = Early Promote 3.8 = Must Promote 3.6 = Promotable 3.4 = Progressing 2.0 = Significant Problems
200
Describe the effects of the evaluation on Good Conduct Medals
A good conduct medal will not be awarded to anyone with a performance mark below 3.0 or prior Non-Judicial Punishment or Courts Martial conviction within a three year timeframe
201
Describe the effects of the evaluation on reenlistment
A member with marks under 3.0 will not normally be able to reenlist.
202
Describe the effects of the evaluation on assignment
Certain assignments require good evaluations. Requirements can be found in the ENLTRANSMAN Chapter 9
203
Explain the use of a naval message
Principal means by which commanders communicate. They are written thoughts, ideas or information expressed briefly and to the point. It is transmitted electronically to avoid delays.
204
Explain the purpose of the following message components: Date Time Group; Classification, Standard Subject Identification Code (SSIC); Passing Instructions Date Time Group- Includes the date and time expressed in Greenwich Mean Time. (example: ZOCT02) Classification- Denotes if the message contains Confidential, Secret, or Top Secret information SSIC- 4 or 5 digit number that stands for the subject of a document. Required on all messages Passing Instructions- These guides assist in the automatic internal routing of messages and include flagwords, codewords, etc
205
What is contained on each of the following service record pages: Page 2, Page 4, Page 13
Page 2- Emergency Data. Used as a reference for beneficiary data should a service member die on active duty Page 4- Enlisted Qualifications History. Chronological history of occupational and training related qualifications, awards, and commendations Page 13- Administrative Remarks. Chronological record of significant miscellaneous entries which are not provided for elsewhere
206
State the purpose and discuss the Enlisted Distribution Verification Report (EDVR)
A monthly statement of an activity’s enlisted personnel. Lists all individuals assigned and provides a summary of the present and future manning status.
207
What is an Operation Report (OPREP) used for
Used to provide National Command Authorities and appropriate naval commanders with immediate notification of any accidental or unauthorized incident involving a possible detonation of a nuclear weapon which could create the risk of outbreak of nuclear war
208
What is a Movement Report (MOVEREP) used for
Primary source of location information concerning ships. Assist the chain of command in the knowledge of locations, tracks, destinations of all vessels for emergency or operational use
209
What is a Logistical Requirements (LOGREQ) used for
Submitted by a ship prior to entering port to notify the proper commands of its logistics requirements while visiting
210
What is a Status of Requirement and Training Support (SORTS) used for
Reports the ship’s status of conditions of readiness in all warfare areas and the ability to conduct operations
211
What is a Situation Report (SITREP) used for
Used by any unit commanding officer, officer in charge, or other commander to provide appropriate operational commanders and higher authority with timely notification for any incident not meeting OPREP-3 special incident reporting criteria. Includes: hoax bomb threats, violent crimes, discrimination, or suicide or attempted suicide
212
Naval Aviation Maintenance Program (NAMP)
213
What instruction covers the NAMP program
OPNAVINST G
214
State the objective of the Naval Aviation Maintenance Program
Supports naval operations by the upkeep of aircraft and associated Support Equipment to the assigned level of maintenance.
215
State the titles and briefly describe the five volumes of NAMP
Volume I- Concepts, policies, organizations, maintenance support procedures, and Organizational and Intermediate Level Maintenance Volume II- Depot Level Maintenance Volume III- Maintenance Data System (MDS) Volume IV- Aviation 3M data processing requirements Volume V- Standard Operating Procedures
216
Describe the three levels of aviation maintenance
Organizational- Performed by an operating unit day to day in support of its own operations Intermediate- Performed by designated maintenance activities in support of using organizations. Depot- Performed at naval aviation industrial establishments to ensure continued flying integrity of airframes and flight systems during subsequent operational service periods
217
Discuss the responsibilities of the Maintenance Officer
Responsible for the accomplishment of the maintenance department mission. Administers procedures in accordance with NAMP.
218
Discuss the responsibilities of the Aircraft Maintenance Officer
Assistant Department Head. Assist the MO in the performance of duties and keep the MO fully informed of matters concerning the department. Receives the same training, and is qualified under the guidelines as the MO
219
Discuss the responsibilities of the Maintenance / Material Control Officer
Responsible for the overall production and material support of the department. Responsibilities include coordinating and monitoring the department workload, maintaining liaison between supported activities and supply, reviewing Maintenance Data Reports
220
Discuss the basic responsibilities of the maintenance/production control
Maintenance control strives to maintain full mission capable aircraft. Production control strives to process item received to keep all non-mission capable and partial-mission-capable parts processed and back to the respective command
221
Describe the difference between scheduled and unscheduled maintenance
Schedule maintenance is the program of formally ensuring timely discovery and correction of defects. These are periodic prescribed inspections and servicing of equipment, done on hours, cycles or landing and calendar or mileage basis Unscheduled maintenance is done on discrepancies and deficiencies found during operations. It consists of fault isolation or troubleshooting, repair, replacement, test, and calibration
222
What is the purpose of the daily inspection
Conducted to inspect for defects to a greater depth that the turnaround or post flight inspections. Valid for 72 hours provided that no flight occurs during this period and no maintenance, other than servicing, is performed. Aircraft may be flown for 24 hours without another daily.
223
What is the purpose of the turnaround inspection
Conducted between flights to ensure the integrity of the aircraft for flight, verify proper servicing, and detect degradation that may have occurred during the previous flight. Valid for 24 hours, provided that no flight occurs during this period and no maintenance other than servicing is performed
224
What is the purpose of the special inspection
Inspection with a prescribed interval other than daily, calendar, or phase. Special inspections always have a number in them; 14 day, 2000 landing, 2000 hours. These intervals are specified in the Periodic Maintenance Information Card deck
225
What is the purpose of the conditional inspection
Unscheduled conditions requiring and inspection such as a bird strike inspection, lighting strike inspection, hard-landing inspection, Foreign Object Damage (FOD) inspection
226
What is the purpose of the phase inspection
This inspection divides the total scheduled maintenance requirement into smaller packages. Inspects the entire aircraft over a period phases (Cycle A, B, C, D) For F/A-18 phases occur over 800 hours
227
What is the purpose of the acceptance inspection
Performed at the time a reporting custodian accepts a newly assigned aircraft, from any source, and on return of an aircraft from SDLM or other major depot level maintenance. Includes: inventory of equipment listed in the Aircraft Inventory Record (AIR), verification of cartridge actuated devices, escape propulsion systems, configuration verification, hydraulic fluid sampling, daily inspection, and complete a functional check flight
228
What is the purpose of the transfer inspection
Performed at the time a reporting custodian transfer an aircraft or support equipment. It includes an inventory of all items listed on the AIR, configuration verification, hydraulic fluid sampling, and daily inspection
229
State the purpose of a Functional Check Flight (FCF)
Used to determine whether the airframe, power plant, accessories and equipment are functioning in accordance with predetermined standards which subjected to the intended operating environment. Completed at completion of SDLM, acceptance, after engine installation / reinstallation, flight control surface component replacement, attitude system component replacement, certain PHASE inspections, or if the the aircraft has not been flown for 30 days.
230
State the purpose of the Weight and Balance Program
Provides service activities with a standard system of field weight and balance control. It also gives the maximum operating weights, center of gravity restrictions and method of loading that is satisfactory for safe flight.
231
State the purpose of the Aircraft Log Book
Contains the history of the aircraft and includes the following sections: Non-aging record Flight Time Inspection Records Repair and Rework Technical Directive Miscellaneous history Preservation / De-preservation record Installed explosive devices section Inventory Record Assembly service record Equipment History Record Scheduled Removal Component Cards Aviation Life Support Equipment Records Seat Survival Kit Records, and Aeronautical Equipment Service Records (AESRs)
232
Who is authorized to sign aircraft logbook entries?
Anyone designated in writing by the Commanding Officer Usually the Maintenance Officer, Maintenance Senior Chief Petty Officer, Maintenance Chief Petty Officer
233
Who is authorized to release aircraft safe for flight
Maintenance Officer, Maintenance Senior Chief Petty Officer, or maintenance control officer. Other persons authorized and designated in writing by the Commanding Officer
234
Discuss the Maintenance Requirement Card (MRC)
Provides instructions required for the efficient performance of scheduled maintenance tasks. Each card contains tasks related to a particular system, subsystem, area, or component using a logical sequence for accomplishment. Identifies the recommend rating, performance time, work area or zone involved, support equipment needed, consumables, replacement parts, and assistance requirement.
235
Discuss the Periodic Maintenance Information Cards (PMIC)
Used to identify scheduled or forced removal items and their replacement intervals. They contain component or assembly removal and replacement, airframe structural life limits, maintenance requirements system indexes such as MRCs, conditional inspections, phase change implementation cards
236
Define an Illustrated Parts Breakdown (IPB)
Contains illustrations and part numbers for all parts of the aircraft or equipment on which it is issued. Contains information required for ordering parts, and for identifying parts and arrangements of parts in assemblies
237
Define Maintenance Instruction Manuals (MIMs)
Contains instructions for “O” and “I” level maintenance and servicing of a specific model aircraft. Identifies each maintenance task to the responsible maintenance level
238
What is the purpose of the Quality Assurance program?
Prevent the occurrence of defects. The achievement of QA depends on prevention, knowledge and special skills
239
Explain the responsibilities of a Quality Assurance Representative (QAR)
Direct representative of the CO for ensuring safety of flight of the item concerned. Certify that the work involved has been personally inspected by them, that it has been properly completed, and is in accordance with current instructions and directives
240
Explain the responsibilities of a Collateral Duty Quality Assurance Representative (CDQAR)
Assigned on a temporary or permanent basis. May be assigned when temporary sever shortages of skills will not support the assignment of a QAR.
241
Explain the responsibilities of a Collateral Duty Inspector (CDI)
Assigned to production work centers to inspect all work and comply with the QA inspections required during all maintenance actions performed by their respective work centers.
242
What is the purpose of a Special QA Audit
Conducted to evaluate specific maintenance tasks, processes, procedures and programs. Maybe requested by the work center or when a new work center supervisor is assigned. Copies are maintained for one year
243
What is the purpose of a Quarterly/Work Center QA Audit
Conducted quarterly to evaluate the overall quality performance of each work center. All areas of the work center are evaluated.
244
What is the function of the Central Technical Publications Library (CTPL)
Function includes the determination of technical manuals required, receipt and distribution control of manuals, and ensuring manuals are updated throughout the maintenance organization. Managed by the QA department
245
What are the elements of a successful Foreign Object Damage (FOD) program
Identifies, corrects, and eliminates causal factors which are a command responsibility and must be a part of the maintenance program.
246
What is the primary objective of the Tool Control Program?
Provides a means to rapidly account for all tools after completing a maintenance task, thus reducing the potential for FOD
247
What is the purpose of the Fuel Surveillance program
Provides a system to testing fuel samples for free water, foreign contaminants and microbiological growth in tanks and systems. QA monitors this program
248
What is the purpose of the Navy Oil Analysis program?
Provides a diagnostic technique to monitor aeronautical equipment without removal or extensive disassembly. QA ensures samples are taken at intervals specified in the appropriate MRCs and MIMs
249
What is the purpose of the Aviators Breathing Oxygen (ABO) Surveillance program
To ensure all personnel working with these systems are thoroughly familiar with the characteristics of ABO, Liquid Oxygen, gaseous hazards and the need for quality standards
250
What is the purpose of the Hydraulic Contamination Control program
To achieve and maintain a satisfactory level of fluid purity in hydraulic systems, providing for safe and efficient operation of the aircraft and/or support equipment
251
What is the purpose of the Tire and Wheel Maintenance program
Provides proper safety training for personnel working with aviation tires
252
State the purpose of the Maintenance Training Improvement Program (MTIP)
Training management system which evaluates the technical knowledge levels of aviation technicians. Comprehensive diagnostic testing in specific system or subsystems identifies deficiencies which are targeted for refresher training
253
Explain the purpose the Monthly Maintenance Plan (MMP)
Provides a schedule of predictable maintenance work. It is prepared and distributed by the 25th of each month and used by supervisors to be award of upcoming requirements. It includes: Flight hours, dates of scheduled inspections, training, qualifications, chain-of-command, calibration schedules, Technical Directive compliance dates
254
Discuss the importance of the Electro-Static Discharge (ESD) program
Provides protected areas for material, equipment, and procedures required to control and minimize electrostatic discharges. ESD protected areas are required when handling ESD parts, assemblies, and equipment outside of their ESD protective covering or packaging
255
Naval Aviation Logistics Command Management Information System (NALCOMIS)
256
To improve upline reporting and to modernize management support
What functional requirements of NAMP are satisfied by the organizational maintenance activity’s NALCOMIS? To improve mission capability, improve aircraft maintenance and supply support. To improve upline reporting and to modernize management support
257
What functional requirements of NAMP are satisfied by the intermediate maintenance activity’s NALCOMIS? Provides the capability to manage maintenance and supply functions and processes by allowing system user to enter, collect, process, store, review , and report information required by the organization
258
Describe the purpose of the following organizational level NALCOMIS subsystems: Maintenance; Flight; Log/Records; Personnel; Assets; Data Analysis; Reports; Ad Hoc Query Maintenance- Collect and processes maintenance related data and provides data to other subsystems on the data base Flight- Collects and processes flight related data Logs/Records- Establishes and maintains configuration profiles for engines, aircraft, and any Aeronautical Equipment Service Record Personnel- Can be used to monitor qualifications Assets- Process inventory and inspection criteria for support equipment and Aviation Life Support Systems Data Analysis- Approves or disapproves Maintenance Action Forms, Naval Flight Records for upline submission Reports- Selects and produces various reports Ad Hoc Query- Creates user-specific needed or requested reports
259
Describe the purpose of the following intermediate level NALCOMIS subsystems: Maintenance; Configuration Status Accounting; Personnel Management; Asset Management; Material Requirement Processing; System Support; Data Off-load/on-load Maintenance Activity- Allows maintenance personnel to document maintenance actions, order parts, maintain individual component repair list data and request inquires. Configuration Status Accounting- Contains 3 sections: Engines; Support Equipment; & Technical Directives Personnel Management- Contains information on assigned military and civilian personnel. Used for workload management and the verify authorization for discrepancy signoffs, QA inspections, MAF Reviews, etc Asset Management- The functions required to maintain inventory and utilization data for Support Equipment and IMRL items. Material Requirement Processing- Covers material requirements generated by maintenance customers at the O-level and I-level. System support- Permits the user to see a list of the on-screen messages that are waiting action Data off-load/on-load- Used to generate files, reports, documents, for data off-load / on-load. These items accompany SE and personnel transferred to/from the organization Technical Publications- provides an automated technical library tracking system
260
Explain the purpose of a Maintenance Action Form (MAF)
Used to document maintenance actions to on-equipment maintenance actions. Used to document maintenance as preventative maintenance, such as corrosion prevention and treatment. Also used to document the removal/installation, and processing of repairable component or item to an I-Level activity or On Site Storeroom
261
Explain the following blocks on a MAF: Work Unit Code; Job Control Number; MAF Control Number; Discrepancy; Corrective Action; When Discovered; Type Equipment; Type Maintenance Code Work Unit Code (WUC)- Identifies the system or subsystem Job Control Number (JCN)- 9, 10, 11 character code, that tracks the MAF through the maintenance process Maintenance Action Form Control Number (MCN)- 7 character alpha/numeric code that tracks the MAF through the maintenance process Discrepancy- Narrative description of the reported discrepancy Corrective Action- Narrative description of the corrective action taken When Discovered (W/D)- Single alpha/numeric code indicating when the need for maintenance was discovered Type Equipment (TYPE EQUIP)- Identifies the type of equipment being worked on Type Maintenance (T/M)- One character alpha/numeric code used to describe the type of work being performed
262
What is a Special Maintenance Qualification (SMQ)?
Used to screen the level of security. It determines which screens or parts of the NALCOMIS an individual has access to
263
Basic Aviation Supply
264
Discuss the security considerations that apply to an individual’s NALCOMIS log in and password
Protect you password Do not share, write down or loan you password Protect passwords from unauthorized viewing Do not leave your terminal or computer while logged in Know who the security personnel are
265
Basic Aviation Supply
266
State the function and responsibilities of material control
Provide material support to their cognizant organization and coordinate indirect material requirements to ensure the material ordered is the material required and delivered to the work center.
267
State the various functions of Material Control
Establish delivery / pick-up points for material Maintain liaison with the supporting ASD on maintenance material matters to ensure the organizations needs are satisfied Prepare documents for material required for operational support Furnish information to the supply activity on the identity and quantity of material Establish procedures to ensure proper operation of tool rooms and the performance of tool inventories Ensure surveys are prepared in the event of loss, damage, or destruction of accountable material Perform memorandum OPTAR funding, accounting , charting , and budgeting of costs Maintain adequate accountability of material and equipment on custody Maintain inventory control of authorized allowances of material listed in the IMRL and authorized allowance lists Validate NMCS / PMCS requisitions daily and maintain current NMCS / PMCS status reports Perform an inventory of aircraft upon receipt and transfer to ensure inventory log entries are made
268
Give examples of items procured with Flight Operations Fund (OFC-01)
Aviation fuels consumed in flight Initial & replacement issues of authorized items of flight clothing and flight operational equipment Consumable office supplies Aerial film, recording tape, and chart paper consumed in flight Flight deck shoes LOX consumed during flight Nitrogen used in aircraft and weapons systems Aircraft maintenance costs/parts when obtained from any other military source COG 1I forms when not directly used in support of maintenance Consumable ASW operations center supplies when consumed in flight Publications used to impart technical and professional knowledge to personnel Plaques for the CO & XO office only Special identification clothing (Flight deck jerseys, helmets)
269
Give examples of items procured with Aviation Fleet Maintenance Fund (AFM)
Paint, wiping rags, towel service, cleaning agent, cutting compounds used in preventive maintenance and corrosion control Consumable repair parts, miscellaneous material, and Navy stock account parts used in the direct maintenance of aircraft Pre-expended, consumable maintenance material meeting requirements of NAVSUP Pub 485 and NAVSUP Pub 567 Aviation fuel used at I-level in test and check aircraft engines. Oils, lubricants, and fuel additives used at both I-level and O-level Allowance list items used strictly for maintenance such as impermeable aprons Fuels used in related in SE (shipboard only) Replacement of components used in test bench repair Maintenance or equipment replacement of aircraft loose equipment listed in AIR Consumable hand tools used in readiness and maintenance Safety / Flight deck shoes used in maintenance shops Repair & maintenance of flight clothing Authorized decal used on aircraft Replacement of consumable tools and IMRL allowance list items Items consumed in interim packaging of aviation fleet maintenance repairable Items such as MAFs, MAF bags, equipment condition tags used in maintenance Authorized special purpose clothing Civilian labor when in direct support of AFT Costs incurred for IMRL repair Replacement of General purpose test equipment IMRL/TBA replenishment/replacement
270
NALCOMIS Operated Material Control shall order parts utilizing what steps
Receive requirements from work centers Use appropriate automated procedures to provide date to the ASD Enter date and time ordered in the register Approve/Disapprove indirect material requirements from work centers by reviewing message mailbox
271
Receipt and delivery of parts/material will be accomplished utilizing these steps
Receive the material and a DOD Single Line Item Requisition System Document (1348) from the ASD MDU Sign the DD 1348 Enter date and time the material is delivered Determine if the component is ASR, HER, or SRC card trackable and the card is available Distribute received material Obtain signature of work center personnel on 1348 Turn in defective repairable CRIPL components within 24 hours of receipt
272
Define the acronym MILSTRIP and state it purpose
Military Standard Requisitioning & Issue Procedure- A uniform procedure established by DOD for its own use to govern requisition and issue of material within standard priorities
273
Define & Explain ICRL (Individual Component Repair List)
A detailed statement of IMA’s component repair capability that contains existing repair capability data on items previously processed by the IMA
274
Define & Explain CRIPL (Consolidated Remain-In-Place List)
A listing of all authorized remain in place items which is published by NAVICP and approved by the TYCOMSs and COMNAVAIRSYSCOM. Every repairable must have a turn-in
275
Define & Explain NMCS (Not Mission Capable Supply)
Material condition of an aircraft that is not capable of performing any of its mission because maintenance required to correct the discrepancy cannot continue due to a supply shortage
276
Define & Explain PMCS (Partial Mission Capable Supply)
Material condition of an aircraft that can perform at least one but not all of its missions because maintenance required to correct the discrepancy cannot continue due to a supply shortage
277
Define & Explain NSN (National Stock Number)
A 13 digit stock number assigned by the Defense Logistics Services Center to identify an item of material in the supply distributions system. It consists of a four digit federal supply classification (FSC), and a nine digit National Item Identification Number (NIIN)
278
Define & Explain NIIN (National Item Identification Number)
9 digit number that consist of a two digit national codification bureau (NCB) code and seven digits which, in conjunction with the NCB code, uniquely identify each NSN item in the federal supply distribution system
279
Define & Explain AVDLR (Aviation Depot Level Repair)
Are financed by the NWCF. Under this process, the end user finances the D-level repair and procurement of 7R COG repairable items. Although the squadron initiates repairable demands, the IMA has primary control over whether these transactions would result in AVDLR NWCF charge.
280
Define & Explain AWP (Awaiting Parts)
Condition that exists when materials required required to complete a maintenance action are not available on ship or station. The time no work can be performed on the item due to lack of parts that are on order
281
Define & Explain IMRL (Individual Material Readiness List)
A consolidated list that shows items and quantities of certain SE required for material readiness of the aircraft ground activity to which the lists applies. Test equipment
282
Define & Explain AIR (Aircraft Inventory List)
Establishes a formal, continuous chain of accountability for specific equipment and material installed on or designated for use on any aircraft of a specified T/M/S
283
Define & Explain EXREP (Expeditious Repair)
The processing of NIS or NC components (repairable) which must be in support of , or related to, an NMCS or PMCS mission
284
Explain the importance of the aeronautical allowance lists in relation to mission sustainability
Lists the equipment and material determined from known or estimated requirements as necessary to place and maintain aeronautical activities in a material readiness condition
285
State the purpose of the Financial Liability Investigation of Property Loss (DD Form 200)
Used to document the report of survey and certify the survey process when government property is lost, damaged, or destroyed
286
State the purpose of the Missing/Lost/Stolen Report
File of reports of missing, lost or stolen items based on Financial Liability Investigation of Property Loss (DD Form 200) and Report of Discrepancy (ROD) (SF Form Maintained by calendar year.
287
What is a flight packet used for?
Contains instructions and forms to assist pilots of aircraft involved in extended flights to obtain material or services which maybe necessary for the continuation of the flight.
288
What items can be found in a flight packet
DD 1348 DOD Single Line Item Requisition System Document Purchase Order/Invoice/Voucher (SF44) to procure supplies/services from commercial concerns DD 1896 or DD 1897 to procure jet fuel or gas from commercial airport Instruction for safeguarding and shipping damaged aircraft Instructions for procuring services and supplies Statement of Witness (SF 94) Claim of Damage or Injury (SF 95) VIDS/MAF (OPNAV 4790/60) Applicable daily and turnaround inspection MRCs Fuel Sample Log Sheets At least 3 oil sample result for aircraft on extended cross country flights
289
Explain the purpose of Source, Maintenance, and Recoverability (SM&R) Codes
Used to communicate maintenance and supply instructions to various logistic support level and using commands for the logistic support of systems, equipment, and end items.
290
Hazardous Material (HM) / Hazardous Waste (HW)
291
What is the instruction number for Hazardous Material Control & Management
OPNAVINST
292
Define the term hazardous material (HM)
Any material that, because of its quantity, concentration, physical or chemical characteristics, may pose a substantial hazard to human health or the environment when purposefully released or accidentally spilled
293
Define the term hazardous waste (HW)
Any discarded material (liquid, solid, gas) which meets the definition of HM and/or is designated as a hazardous waste by the Environmental Protection Agency or a State authority
294
Discuss HM storage and inspection requirements
Storage locations shall be inspected weekly and quarterly, inspect for tightness of closure, corrosion, leakage, improper or inadequate labeling, and expired shelf life
295
State the purpose and information contained on the Material Safety Data Sheet (MSDS)
Technical bulletins containing information about materials, such as composition, chemical and physical characteristics, health and safety hazards, and precautions for safe handling and use
296
What are the 6 categories of HM?
Flammable or combustible materials Toxic materials Corrosive materials Oxidizing materials Aerosol containers Compressed gases
297
Explain the general procedures to be followed when a HM/HW spill is discovered
Discovery Notification Initiation of action Evaluation Containment Damage Control Dispersion of Gases/Vapors Cleanup and Decontamination Disposal
298
State the personal protection equipment required when handling HM/HW
Eye protection Respiratory devices Gloves
299
Discuss the disposal limitations for adhesives
Comply with ship/station procedures for handling the disposal of hazardous materials and contaminated rags, absorbents, containers, and clothing Planned Maintenance System (PMS) disposal methods shall be followed Store used/excess material in approved, labeled containers pending shore disposal
300
Discuss the disposal limitations for adhesives
Comply with ship/station procedures PMS disposal methods shall be followed Containerize spent greases or spilled greases in an approved container, original can, or doubled plastic bags. Seal, label, and store pending shore disposal. No overboard discharge Never place grease in shipboard incinerators
301
Discuss the disposal limitations for hydraulic fluid
Comply with ship and station procedures PMS disposal methods shall be followed Containerize spent or spilled hydraulic fluids in approved containers for proper shore disposal Keep collected petroleum hydraulic fluids separate from synthetic hydraulic fluids
302
Discuss the disposal limitations for fuels
Comply with ship and station procedures PMS disposal methods shall be followed Containerize all excess fuels in fire safe drums for proper shore disposal Place fuel-contaminated rags/absorbent materials in fire safe drums for shore disposal
303
Discuss the disposal limitations for waste oils
Comply with ship and station procedures PMS disposal methods shall be followed Containerize spent or spilled oils/lubricants in approved containers for proper shore disposal Used/excess oily solid materials maybe thrown overboard beyond 50 nautical miles from shore Keep collected petroleum lubricants/oils separate from synthetic lubricants/oils
304
Discuss the disposal limitations for paint / paint thinners
Comply with ship and station procedures PMS disposal methods shall be followed Containerize all used/excess paint materials in approved containers for proper shore disposal
305
Describe the required HM training
Types of HM in their work area What HMs are and how they are disposed of How to read and interpret hazard warning labels What an MSDS is, how to read it, and where a copy is available for review Protective measures when handling HM Emergency procedures
306
Describe the purpose of secondary labeling of HM when removed from the original container
Use only approved containers, ensure that existing precautionary labeling is retained and that subsequent containers are marked with appropriate precautionary labeling
307
Discuss the purpose of the HM Authorized Use List (AUL)
Current inventory of HM, chemical substances, or components know or suspected to contain HM used for local acquisition and use.
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.