1. Guide To UNIX Using Linux Fourth Edition
Chapter Two
Exploring the UNIX/Linux File Systems and File Security
Guide To UNIX Using Linux Fourth Edition
Chapter 2 Unix (31 slides)
CTEC 110

2. Objectives Discuss UNIX/Linux file systems
Explain partitions and inodes
Understand the elements of the root hierarchy
Use the mount command
Explain and use paths, pathnames, and prompts
Navigate the file system
Create and remove directories
Copy and delete files
Configure file permissions
Chapter 2 Unix (31 slides)
CTEC 110

3. Understanding UNIX/Linux File Systems
File: basic component for data storage
UNIX/Linux considers everything to be a file
A file system is UNIX/Linux’s way of organizing files on mass storage devices
A physical file system is a section of the hard disk that has been formatted to hold files
The file system is organized in a hierarchical structure (inverted tree)
Chapter 2 Unix (31 slides)
CTEC 110

4. Understanding UNIX/Linux File Systems (continued)
Chapter 2 Unix (31 slides)
CTEC 110

5. Understanding the Standard Tree Structure
The structure starts at the root level
Root is the name of the file at this basic level and it is denoted by the slash character (/)
Directory: file that can contain other files and directories
Subdirectory: directory within a directory
The subdirectory is considered the child of the parent directory
Chapter 2 Unix (31 slides)
CTEC 110

6. Using UNIX/Linux Partitions
The section of the disk that holds a file system is called a partition
When installing UNIX/Linux, one of the first tasks is deciding how to partition a storage device, or hard disk
Hard disks may have many partitions
UNIX/Linux partitions are given names
LINUX uses hda1 and hda2
Chapter 2 Unix (31 slides)
CTEC 110

7. Using UNIX/Linux Partitions (continued)
Storage devices are called peripheral devices
Peripheral devices connect to the computer through electronic interfaces
IDE: Integrated Drive Electronics
SCSI: Small Computer System Interface
Chapter 2 Unix (31 slides)
CTEC 110

8. Chapter 2 Unix (31 slides)
CTEC 110

9. Setting Up Hard Disk Partitions
Partitioning your hard disk provides organized space for file systems
At least 3 partitions (root, swap, /boot) often recommended
Root partition holds root file system directory (/), size depends on installation but often ranges between 1.2 to 5+ GB
Chapter 2 Unix (31 slides)
CTEC 110

10. Setting Up Hard Disk Partitions (continued)
Swap partition acts as a memory extension, often has same size as RAM, enables virtual memory
/boot partition used to store the os files comprising the kernel and is relatively small
Other used partitions include /usr, /home, /var
Chapter 2 Unix (31 slides)
CTEC 110

11. Using Inodes
Inodes are associated with directories and files in ufs and ext file systems
An inode contains the name, general information, and location information (a pointer) for a file or directory
A superblock contains information about the block layout on a specific partition
Chapter 2 Unix (31 slides)
CTEC 110

12. Exploring the Root Hierarchy
UNIX/Linux must mount a file system before any programs can access files on it
To mount a file system is to connect it to the directory tree structure
The root file system is mounted by the kernel when the system starts
Chapter 2 Unix (31 slides)
CTEC 110

13. Exploring the Root Hierarchy (continued)
The root directory contains sub-directories that contain files:
/bin contains binaries, or executables needed to start the system and perform system tasks
/boot contains files needed by the bootstrap loader as well as kernel images
/dev contains system device reference files
Chapter 2 Unix (31 slides)
CTEC 110

14. Chapter 2 Unix (31 slides)
CTEC 110

15. Exploring the Root Hierarchy (continued)
Root subdirectories continued:
/etc contains configuration files that the system uses when the computer starts
/lib contains kernel modules, security information, and the shared library images
/mnt contains mount points for temporary mounts by the system administrator
/proc is a virtual file system allocated in memory only
Chapter 2 Unix (31 slides)
CTEC 110

16. Exploring the Root Hierarchy (continued)
Root subdirectories continued:
/root is the home directory of the root user, or the system administrator
/sbin contains essential network programs used only by the system administrator
/tmp is a temporary place to store data during processing cycles
/var contains subdirectories which have sizes that often change, such as error logs
Chapter 2 Unix (31 slides)
CTEC 110

17. Using the mount Command
Users can access mounted file systems which they have permission to access
Additional file systems can be mounted at any time using the mount command
To ensure system security, only the root user uses the mount command
Chapter 2 Unix (31 slides)
CTEC 110

18. Using Paths, Pathnames, and Prompts
To specify a file or directory, use its pathname, which follows the branches of the file system to the desired file
A forward slash (/) separates each directory name
The UNIX/Linux command prompt may indicate your location within the file system
Use the UNIX/Linux pwd command to display the current path name
Chapter 2 Unix (31 slides)
CTEC 110

19. Chapter 2 Unix (31 slides)
CTEC 110

20. Chapter 2 Unix (31 slides)
CTEC 110

21. Navigating the File System
To navigate the UNIX/Linux directory structure, use the cd (change directory) command
UNIX/Linux refers to a path as either:
Absolute - begins at the root level and lists all subdirectories to the destination file
Relative - begins at your current working directory and proceeds from there
Chapter 2 Unix (31 slides)
CTEC 110

22. Using Dot and Dot Dot Addressing Techniques
UNIX/Linux interpret a single dot (.) to mean the current working directory
Two dots (..) mean the parent directory
cd .. moves you up a level in the directory structure
Chapter 2 Unix (31 slides)
CTEC 110

23. Listing Directory Contents
The ls (list) command displays a directory’s contents, including files and subdirectories
Chapter 2 Unix (31 slides)
CTEC 110

24. Using Wildcards
A wildcard is a special character that is used as a placeholder
The * wildcard represents any group of characters in a file name
The ? wildcard represents a single character in a file name
Chapter 2 Unix (31 slides)
CTEC 110

25. Creating and Removing Directories and Files
mkdir (make directory) command
Create a new directory
rmdir (remove directory) command
Delete an empty directory
cp (copy) command
Copy files from one directory to another
rm (remove) command
Delete files
Chapter 2 Unix (31 slides)
CTEC 110

26. Configuring File Permissions for Security
Chapter 2 Unix (31 slides)
CTEC 110

27. Configuring File Permissions for Security (continued)
Owner has read w
Owner has write x
Owner has execute
Group has read -
Group does not have write
Group has execute
Others have read
Others do not have write
Others have execute
Chapter 2 Unix (31 slides)
CTEC 110

28. Configuring File Permissions for Security (continued)
chmod command
To set file permissions
Settings are read (r), write (w), execute (x)
The three types of users are owners(users), groups, and others(world) or simply (ugo)
Setting permissions to directories
Use the execute (x) to grant access
Chapter 2 Unix (31 slides)
CTEC 110

29. Chapter Summary
In UNIX/Linux, a file is the basic component for data storage and UNIX and Linux consider everything a file
A file system is UNIX/Linux’s way of organizing files on mass storage devices and each file is referenced using a correct and unique pathname
The section of the mass storage device that holds a file system is a partition
Chapter 2 Unix (31 slides)
CTEC 110

30. Chapter Summary (continued)
You can customize your command prompt to display the current working directory name, the current date and time, and several other items
The ls command displays the names of files and directories contained in a directory
Use the chmod command to set permissions such as read (r), write (w), execute (x) for files that you own
Chapter 2 Unix (31 slides)
CTEC 110

31. Chapter 2 Unix Exercises
Work through Hands-on Projects at end of chapter 2
Canvas: Review Questions 2
(Do not do questions 22,23,24 and 25)
Read chapter 3 before next class session
Quiz 2 Unix…
Chapter 2 Unix (31 slides)
CTEC 110