1. Population Dynamics
Unit II

2. Characteristics of Populations
Three important characteristics of a population are:
Its geographic distribution (range)
Describes the area inhabited by a population – can vary in size
Population Density
The number of individuals per unit area
Growth rate
The number of births minus the number of deaths

3. Patterns of Dispersion
Environmental and social factors influence the spacing of individuals in a population.
3 Patterns:
Clumped
Uniform
random

4. Survivorship Curves
A life table is an age-specific summary of the survival pattern of a population
Data in a life table can be represented graphically by a survival curve.
Curve usually based on a standardized population of 1000 individuals and the X-axis scale is logarithmic.
Type 1
Type 2
Type 3

5. Survivorship Curves
Survivorship curves can be classified into three general types
Type I, Type II, and Type III I II
III 50
100 1 10
1,000
Percentage of maximum life span
Number of survivors (log scale)
TYPE 1: high survivorship until old age.
TYPE 2: constant proportion of individuals die at each age.
TYPE 3: experience high mortality as larvae but decreased mortality later in life.
Type I curve typical of animals that produce few young but care for them well (e.g. humans, elephants). Death rate low until late in life where rate increases sharply as a result of old age (wear and tear, accumulation of cellular damage, cancer).
Type II curve has fairly steady death rate throughout life (e.g. rodents). Death is usually a result of chance processes over which the organism has little control (e.g. predation)
Type III curve typical of species that produce large numbers of young which receive little or no care (e.g. Oyster). Survival of young is dependent on luck. Larvae released into sea have only a small chance of settling on a suitable substrate. Once settled however, prospects of survival are much better and a long life is possible.

6. Type I curve
Type I curve typical of animals that produce few young but care for them well
(e.g. humans, elephants)
Death rate low until late in life where rate increases sharply as a result of old age (wear and tear, accumulation of cellular damage, cancer).

7. Type II curve
Type II curve has fairly steady death rate throughout life (e.g. rodents).
Death is usually a result of chance processes over which the organism has little control (e.g. predation)

8. Type III curve
Type III curve typical of species that produce large numbers of young which receive little or no care (e.g. Oyster).
Survival of young is dependent on luck. Larvae released into sea have only a small chance of settling on a suitable substrate.
Once settled however, prospects of survival are much better and a long life is possible.

9. Population Growth Three factors that can affect population size:
Number of births
Number of deaths
Number of individuals that enter or leave the population (immigration & emigration)
A population will increase or decrease in size depending on how many individuals are added to it or removed from it
Populations generally grow if more individuals are born than die in any period of time.
A population can grow if its birthrate is greater than its death rate. If the birthrate equals the death rate, the population stays more or less the same size.
Immigration is the movement of individuals into an area (another factor than can cause populations to grow).
animals in search of food or mates arrive from outside
Emigration is the movement of individuals out of a population (causes decrease in population size).
young animals leaving area they were born to find mates and establish territories

10. Exponential Population Growth (EPG)
Describes population growth in an idealized, unlimited environment.
During EPG the rate of reproduction is at its maximum.

11. Exponential Growth
If a population has abundant space and food, and is protected from predators and disease, then organisms in that population will multiply and the population size will increase.
The J shaped curve indicates that the population is undergoing exponential growth. This occurs when the individuals in a population reproduce at a constant rate.
Under ideal conditions with unlimited resources, a population will grow exponentially and reach BIOTIC POTENTIAL.

12. Exponential Growth Trends
If a population has abundant space and food, and is protected from predators and disease, then organisms in that population will multiply and the population size will increase.
The J shaped curve indicates that the population is undergoing exponential growth. This occurs when the individuals in a population reproduce at a constant rate.
Under ideal conditions with unlimited resources, a population will grow exponentially and reach BIOTIC POTENTIAL.

13. Carrying Capacity
Exponential growth cannot be sustained for long in any population.
A more realistic population model limits growth by incorporating carrying capacity.
Carrying Capacity (K) is the maximum population size the environment can support.

14. The Logistic Growth Model
In the logistic population growth model the rate of increase declines as carrying capacity is approached.
As resources become less available, the growth of a population slows or stops. The general S shaped curve of this growth pattern is called logistic growth.
Logistic growth occurs when a population’s growth slows or stops following a period of exponential growth.
can slow when the birthrate decreases, the death rate increases, or when both occur at the same rate
Can slow when the rate of immigration decreases, the rate of emigration increases, or both
The point at which cc line intercepts the y axis tells you the size of the population when the average growth rate is zero.
That number represents the largest number of individuals that a given environment can support (carrying capacity).
Class Activity: Draw a concept map that shows how populations grow. Include the following terms: exponential growth, logistic growth, birthrate, death rate, immigration, emigration and any other terms.
Key Terms: population density, immigration, emigration, exponential growth, logistic growth, carrying capacity.
Key Concepts: What characteristics are used to describe a population? What factors affect population size? What are exponential and logistic growth? What is meant by population density?

15. Logistic Growth Trends
As resources become less available, the growth of a population slows or stops. The general S shaped curve of this growth pattern is called logistic growth.
Logistic growth occurs when a population’s growth slows or stops following a period of exponential growth.
Can slow when the birthrate decreases, the death rate increases, or when both occur at the same rate
Can slow when the rate of immigration decreases, the rate of emigration increases, or both
Can slow as the population encounters a limiting factor
The point at which carrying capacity line intercepts the y axis tells you the size of the population when the average growth rate is zero.
That number represents the largest number of individuals that a given environment can support (carrying capacity).

16. Phases of Logistic Growth Curve3 2 1

17. Logistic model produces a sigmoid (S-shaped) population growth curve.

18. K vs. R Reproduction Strategies
K-selection, or density-dependent selection
Selects for life history traits that are sensitive to population density.
Produce relative FEW offspring that have a GOOD chance of survival.
r-selection, or density-independent selection
Selects for life history traits that maximize reproduction.
High reproductive rate is the chief determinant of life history.
The concepts of K-selection and r-selection have been criticized by ecologists as oversimplifications.
Most organisms exhibit intermediate traits or can adjust their behavior to different conditions.

19. Limits to Growth
Limiting Factors- any factor that causes population growth to decrease

20. Limits to Growth
In the context of populations, a limiting factor is a factor that causes population growth to decrease
Competition
Predation
Parasitism
Drought & other climate extremes
Human disturbances

21. Density & Growth Regulation
Density Dependent factors – include disease, competition, parasites and food. These have an increasing effect as the population increases.
Density Independent factors – affect all populations regardless of their density (numbers) Most are abiotic factors such as temperature, storms, floods, droughts and habitat destruction.

22. Population Regulation
Populations are regulated by a complex interaction of biotic and abiotic influences:
In density-independent populations birth rate and death rate do not change with population density.
For example, in dune fescue grass environmental conditions kill a similar proportion of individuals regardless of density.
In contrast in density-dependent populations birth rates fall and death rates rise with population density.
Density-dependent population regulation much more common than density- independent

23. Density-Dependent Factors
A limiting factor that depends on population size is called a density-dependent limiting factor
These factors become limiting only when the number of organisms per unit area reaches a certain level
Competition
Predation
Parasitism
Disease

24. Competition
When populations become crowded, organisms compete, or struggle, with one another for food, water, space, sunlight, and other essential elements of life
The more individuals that live in an area, the sooner they will use up an available resource
Interspecific competition occurs between members of two different species.
Intraspecific competition occurs between members of the same species.
Why is competition a density dependent limiting factor?
INTERSPECIFIC V/S INTRASPECIFIC COMPETITION…

25. Predation Populations in nature are often controlled by predation
The regulation of a population by predation takes place within the predator-prey relationship (one of the best known mechanisms of population control)
Give moose/wolf example on pg. 126.

26. Predation Can Affect Population Sizes
In general the size of the predator population is influenced by the size of the prey
if more food is available the prey population will grow, as the prey population decreases the predator population decrease

27. Parasitism & Disease
Parasites can limit the growth of a population because they take nourishment at the expense of their hosts
This often weakens the host and can lead to disease or death

28. Density-Independent Factors
Density-independent limiting factors affect all populations in similar ways, regardless of the population size
Weather
Natural disasters
Seasonal cycles
Human activities
Damming rivers, cutting forests
Class Activity: pg. 127 making connections
Key Terms: limiting factor, density-dependent limiting factor, predator-prey relationship, density-independent limiting factor.
Key Concepts: List 3 density-dependent factors and 3 density-independent factors that can limit the population growth of a population. What is the relationship between competition and population size? If an entire lynx population disappears, what is likely to happen to the hare population on which it preys?

29. Human Population Growth
Like the populations of many other living organisms, the size of the human population tends to increase with time
Began growing more rapidly ~500 years ago because agriculture and industry made life easier
Improved sanitation, medicine and health care
But…earth’s resources are limited!
1st paragraph pg. 129

30. Human Population Growth
In US, death rate is declining, life expectancy is increasing, and fertility rate is decreasing.
The human population rate increased slowly until about 1650, then began to grow exponentially. Some argue that we have exceeded our carrying capacity.
Approximately 33% of the human population died as a result of the plague around 1300.
The global human population has grown almost continuously throughout history, but it skyrocketed after the Industrial Revolution.
The rate has slowed in recent decades, mainly as a result of decreased birth rates throughout the world.

31. Patterns of Population Growth
The scientific study of human populations is called demography
Examines the characteristics of human populations and attempts to explain how those populations will change over time
Birthrates, death rates, and the age structure of a population help predict why some countries have high growth rates while other countries grow more slowly
Talk about Thomas Malthus…pg 130.

32. The Demographic Transition
Figure 5-12 on pg. 130.
Over the past century, population growth in the US, Japan, and much of Europe has slowed dramatically. One hypothesis as to why is that these countries have completed the demographic transition (a dramatic change in birth and death rates).
As countries modernize, advances in nutrition, medicine, and sanitation result in more children surviving into adulthood and more adults living to old age. These changes lower the death rate and begin the demographic transition.
Figure 5-12 explanation of chart.

33. The Demographic Transition
Over the past century, population growth in the US, Japan, and much of Europe has slowed dramatically. One hypothesis as to why is that these countries have completed the demographic transition (a dramatic change in birth and death rates).
As countries modernize, advances in nutrition, medicine, and sanitation result in more children surviving into adulthood and more adults living to old age. These changes lower the death rate and begin the demographic transition.

34. Age Structure
Population growth depends in large part on how many people of different ages make up a given population
We can predict future growth using models called age-structure diagrams
Graph the numbers of people in different age groups in the population
Discuss age distribution chart on pg. 131.
Talk about future population growth.
Key Terms: demography, demographic transition, age-structure diagram.
Key Concepts: Describe the general trend of human population growth that has occurred over time. What factors explain why populations in different countries grow at different rates? Describe the demographic transition and explain how it might affect a country’s population growth rate?

35. Age Structure Diagrams
Age structure diagram- a population profile, graphs the numbers of people in different age groups in the population