1. Convolutional Neural Networks for Image Processing with Applications in Mobile Robotics By, Sruthi Moola

2. Convolution Convolution is a common image processing technique that changes the intensities of a pixel to reflect the intensities of the surrounding pixels. A common use of convolution is to create image filters

3. Convolutional neural network Type of feed-forward MLP. Conv. Nets are inspired by biological processes in visual cortex. So it is used in image recognition and handwritten recognition. high performance in MNIST database. Designed by Yann Lecun.

4. Convolutional neural network Architecture of applying neural networks to 2-D arrays (usually images), based on spatially localized neural input. Technique of sharing weights or receptive fields.

5. Types of layers Convolutional layers ▫Feature Map or filter ▫Shared weights Subsampling or Max pooling Full connected layer (classification)

6. Convolutional layer Rectangular grid of neurons Input from a rectangular section of previous layer Weights are same for each neuron Image convolution of previous layer Weights specify convolutional filters Several grids in each layer, each grid takes inputs from all layers using different filters

7. Max pooling layer Takes smaller blocks from convolutional layer Subsamples to produce single output from that block Several ways- average or maximum or learned linear combination of neurons Max pooling layers take maximum out of that block

8. Full-connected layer High level reasoning in NN Takes all neurons from previous layer and connects it to every single neuron it has These are not spatially located (visualize as one- dimensional) Therefore, no convolutional layers after fully connected layer

9. Convolutional neural network Network structure designed extracts relevant features, restricting neural weights of one layer to a local perceptive field in previous layer. Thus, feature map obtained in second layer The degree of shift and distortion variance is achieved by reducing the spatial resolution of the feature map

10. A six-layer convolutional neural network

11. Training Back propagation In feature map, all neurons share the same weight and bias, the number of parameters is smaller than in fully connected multilayer perceptron, leading to a reduction in gap Subsampling/pooling layers have one trainable weight and one trainable bias, so number of free parameters is even lower when compared

12. Because of low number of free parameters, training of CNN requires far less computational effort than training multilayer perceptron

13. Applying CNN to real-world problems Image processing system on mobile robot Task – detect and characterize cracks and damage in sewer pipe walls. Uses monochrome CCD camera Task of CNN- ▫filter raw data ▫Identify spatial location of cracks ▫Enable characterization of length, width of damage

14. Example input and target images for large cracks on a concrete pipe

15. Horizontal feature – pipe joint Significant challenges for filtering system ▫Differentiating between pipes and joints ▫Accounting for shadows and lighting effects

16. Training was conducted using standard weight updates rules and approximately 93% of pixels in the validation set were correctly classified Not every pixel was used for training ▫Computational expense ▫Low proportion of ‘crack’ to ‘clean’ training samples tended to bias the network towards classifying all samples as ‘clean’

17. Example input and CNN output frames Three frames including Crack present, no crack and pipe joint, and crack and joint together represent the data set. Using a subsequent crack detection algorithm, the network ignores the presence of joints and attenuated lighting effects while enhancing the cracks.

18. Conclusion Issues- Training uses bitmap type images that results in over abundance of training sample points. Key characteristics like sharing weights are appropriate when input data is spatially distributed. Concept of CNNs and weight sharing not only reduces the need for computation, but also offers a satisfying degree of noise resistance and invariance to various forms of distortion.

19. In the present system, CNNs are expected to achieve better results than standard feed forward tasks.

20. Thank you