1. Watershed Parameters of the El Fuerte Basin Samuel Sandoval-Solis GIS for WR Dr. David Maidment

2. Outline Introduction Objectives Area Studied Data Sources WRAPHydro Process Results Process of Uploading the Watershed Parameters in the Water Reliability Model Hydropower reliability results displayed in GIS Conclusions

3. Introduction The modeling of water resources has become an important issue for decision holders and water users. By modeling, we can diagnose the resource, visualize future scenarios and establish strategies for optimization. The WRAP model need to be fed with certain files: naturalized flow, evaporation and watershed parameters (drainage area, curve number and mean annual precipitation ).

4. Objectives Obtain the watershed parameters (drainage area, curve number and mean annual precipitation ) for the El Fuerte Basin Upload the watershed parameters in the El Fuerte Water Reliability Model for Hydropower Generation Display the reliability output in the Geographic Information System (GIS)

5. El Fuerte Basin

7. Area of 34,597 sq Km 3 Reservoirs 2 Irrigation Districts Luis Donaldo Colosio “Huites” (4568 MCM) Miguel Hidalgo “El Fuerte” (4069 MCM) Josefa Ortiz de Dominguez (590 MCM) ID 076 Valle del Carrizo (43,259 ha) ID 075 Valle del Fuerte (201,844 ha) Characteristics

8. Data Sources The DEM used in this project was provided by the Mexican mapping agency INEGI. The Mexican climatologic database, ERIC, was used to locate the precipitation gages and to build the mean annual precipitation raster. Also, the Mexican hydrologic database, BANDAS, were used to locate the streamflow gages.

9. WRAP Hydro Process

10. Preprocessing -To set the Geodatabase -To obtain and give format the necessary feature classes -To obtain the rasters

11. Watershed Parameterization The watershed parameters were obtained for the El Fuerte Basin through the process described in the final parameter processing section of the WRAP Hydro report by Gopalan and Whitaker (2003); and the Section 7 WRAPHydro Process of the tutorial by Patino (2005).

12. Watershed Parameters of the El Fuerte Basin

15. Uploading the Watershed Parameters in the Water Reliability Model

16. Water Reliability Model of Hydropower Generation for the El Fuerte Basin

17. Hydropower Generation Miguel Hidalgo “Fuerte” Reservoir - 370,000 MWatts/Year - 4069 MCM Luis Donaldo Colosio “Huites” Reservoir - 917,000 MWatts/Year - 4568 MCM - Monthly Coefficients for Water Use - Capacity-Elevation Curve

18. Irrigation Districts ID 075 Valle del Fuerte 3,020 MCM/Year ID 076 Valle del Carrizo 582 MCM/Year - Monthly Coefficients for Water Use - Area-Capacity Curve

19. Results

20. Animation

21. Conclusions

22. 23 sets of drainage area and mean annual precipitation parameters were obtained for the El Fuerte Basin. The average curve number parameters were not obtained due to the lack of information. The WRMHG can be extended from 8 to 24 control points by using the geodatabase. The outputs of the WRMHG were displayed in the Geodatabase. Further research is needed in the curve number raster, and in the strict representation of the basin

23. Thank you Questions?