1. Druck- und Temperaturmesstechnik GSoft / Testing and Callibratiion Technology / 25.03.2009 Testing- and Calibration Technology Data logger evaluation software GSoft 1

2. Data logging in process …with handheld CPH 6200 / CTH 6200 and data logger evaluation software GSoft 2

3. Handheld with evaluation software GSoft Software features: - Easy operation due to self-explanatory icon buttons - Zoom function available - Remote operation via PC possible - Data can be exported to Excel ®, etc. - Language: English, German, France, Spain,... CPH 6200CTH 6200 Instrument features: - CPH 6200 and CTH 6200 can store measurement data (Logger integrated) - Possibility of cyclic storage of the measurement data - Storage up to 16,200 measurement data (depending on the model) pressure temperature 3

4. 2sec Starting logger (measurement storage) Logger active Measuring mode  Cyclic measurement storage is active. Logger active: until stopped manual by the user or logger reaches total storage capacity (up to 16,200 measurement data) Initial state: measuring mode* * cyclic logger has been activated before via menu. 4

5. Button stops the logger Initial state: measuring mode Stop logger? NO Logger active Stop logger? YES?    Measuring mode Cyclic measurement storage is active. Logger can be stopped: by pressing Safety function: should measurement storage be stopped? Choice via or Stopping logger (measurement storage) 5

6. Measurement data Transfer of the measurement data to PC via RS232- or USB-interface GSoft offers the possibility to show the measurement data on PC as table or diagram Connecting the Handheld with PC 6

7. User interface of software GSoft 7

8. 1. Interface configuration Click to choose the interface 8

9. 1. Interface configuration Confirmation of interface 9

10. 2. Creating a connection with the Handheld Search Handheld 10

11. 3. Read actual status of the Handheld Transfer actual status of the Handheld 11

12. Stored logger data are shown Read logger data 4. Showing actual status of the Handheld Sensor data at the moment when the actual status is read out 12

13. Create chart Logger data are shown 5. Logger data are shown as table 13

14. Select data 6. Presettings of the graph 14

15. 7. Logger data are shown as diagram 15

16. Further information 1.) Graph options: zoom function 2.) Peak detection via min/max function 3.) Start logger, if any data are already in the logger 4.) Software update 5.) Outlook 6.) Product Support 16

17. After marking an area with the left mouse button, the zoomed graph will be shown 1.) Graph options: zoom function 17

18. 1.) Graph options: zoom function Via the scrolling button you can scroll your zoomed graph in every position you want 18

19. 2.) Peak detection via min/max function Available peak in the time span between 17:40:03 and 17:40:04 Actual measure data 17:40:04 In addition to the actual measured value, the min- and max-values also will be stored and can be shown in the graph. (Choice via the window “Create New Diagram”) The sample shows, in the time span between 17:40:03 and 17:40:04 there was a peak of about 0,64 bar which will be read out and shown in the graph parallel to the actual measure data of the time 17:40:04. 19

20. 3.) Start logger, if any data are already in the logger Safety function: should the stored measurement data really be cleared? Choice via or Button clears the existing measurement data Initial state: New logger data can be stored (see description above) Clear existing logger data? NO? Measuring mode Clear existing logger data? YES?    Delete old measurement data: by pressing for 2seconds 2sec 20

21. 4.) Software update Software update on www.wika.de : //Download/Software/Calibration Technology for free.www.wika.de 21

22. 4.) Software update Download file (update file) has to be stored in the same folder in which the program GSoft is located 22

23. 4.) Software update Starting the update file To start the update, double-click on the update file 23

24. 5.) Outlook Possibility to show pressure- and temperature data in one graph Both data sets have to be stored as 2 files. Thus both files can be opened and displayed in one diagram. 24

25. 5.) Outlook Possibility of „Copy and Paste“. Easy to import measurement data in a Excel-sheet 25 GSoft Excel sheet

26. For sales information please contact Heike Scherf GB-PI-PK Tel 09372 / 132-473 Fax 09372 / 132-217 E-Mail: h.scherf@wika.deh.scherf@wika.de Alois Grimm CT Tel 09372 / 132-8916 Fax 09372 / 132-8008916 E-Mail: a.grimm@wika.dea.grimm@wika.de 6.) Product Support For technical information please contact 26