1. First-Year Engineering Program Performance Test 1: Design Concept Comparisons Objective and Goals Lab Procedure Analysis Test Readiness Review

2. First-Year Engineering Program AEV Project Objective (Problem Definition) INITIAL CONCEPTS (Brainstorming) INITIAL EXPERIMENTAL RESEARCH ANALYZE DESIGN DECISION RESEARCH COMPARE FINAL DESIGN Present AEV Design PT 1 PT 2 PT 3 PT 4 (Power Available)(Energy Analysis)(Programming)

3. First-Year Engineering Program Objectives 1.To build second AEV concept, 2.To test, using the same operational procedures as Energy Analysis and Efficiency Labs, and 3.To test and compare both AEV concepts

4. First-Year Engineering Program Goals 1.Plot AEV comparison propulsion system efficiency and power-time curves, 2.Determine and compare energy used throughout AEV operations, 3.Record results in Preliminary Design Review, and 4.Use results to select AEV concept to move forward with the detailed Critical Design Review process

5. First-Year Engineering Program Procedure Document Overview Overview 1.Review Lab Rules 2.Review Energy Analysis and Efficiency Labs procedures 3.Build and test second AEV concept 4.Compare and analyze data for both AEV concepts

6. First-Year Engineering Program Testing Procedure – This Week Sec. 2.2: AEV and AEV Component Testing – Work Through Together 1.Build second AEV concept 2.If propeller configuration is different from the first AEV concept, perform wind tunnel testing on the second AEV concept propeller configuration 3.Test second AEV on desktop and classroom track, using Energy Analysis Lab operational procedure

7. First-Year Engineering Program Data Analysis Sec. 3: Data Analysis cont. 3.Use AEV Design Software and Excel to compare AEV concepts 4.Calculate and compare total energy used

8. First-Year Engineering Program Data Analysis – What does it mean? Labs AEV and AEV Component Testing and Analysis PT1 AEV Concepts Testing and Analysis PDR AEV Operational and Component comparisons Design decisions and supportive data for selected AEV concept

9. First-Year Engineering Program PT1 AEV Design Cycle Assignments 1.Prepare PT1-TRR Requirements (DUE at the BEGINNING of the lab) 2.Finalize PDR, including AEV-PT1 Summary document, using Grading Guidelines

10. First-Year Engineering Program PT1-TRR Requirements 1.Assemble second AEV concept 2.Discuss the necessary tests needed in order to complete the concept comparisons, and testing strategy (division of the team) to accomplish the goals. 3.Create a table of the specific tasks.

11. First-Year Engineering Program PT1 Day 1 1.Start working on PT1 Test Readiness Review Document including: a.Assembling second AEV b.Planning for additional wind tunnel testing (if needed) c.Planning for additional classroom track testing Manage your time and team member responsibilities!

12. First-Year Engineering Program PT1 Day 2: Work Session 1.Continue working on PT1 Test Readiness Review Document including: 2.Start PT1 Summary following PT1 and PDR Grading Guidelines  Continue working on PDR report 3.Desktop Wind Tunnel and AEV Static Testing can be tested following procedure document  Classroom wind tunnel schedule for testing is posted in the class drive Manage your time and team member responsibilities!

13. First-Year Engineering Program PT1 Day 3: Lab 1.Test Readiness Review document is due at the Beginning of Lab 2.Schedule for testing is posted in the class drive:  Wind tunnel and classroom track schedule for testing is posted in the class drive 3.Finish Performance Test 1 and write summary results as part of PDR report 4.Prepare for Performance Test 2 a)Assigned readings, etc.