2. Replication with MySQL 5.1 Ligaya Turmelle Senior Technical Support Engineer - MySQL ligaya.turmelle@oracle.com http://joind.in/1573

3. Agenda What it is How it Works Types Use Cases Setting it up Filtering Rules Monitoring

4. What is it?

5. How does it work?

6. At a high level On the master – makes a change to the data – writes it to the binary log On the slave – copies the masters binary logs to the relay logs – runs the relay logs applying the changes

7. Nitty Gritty of Master Side Master makes a change and writes the binlog entry – Details: it writes the the changes to the binary log writes the transactions serially After writing to the binary log, the master tells the storage engine to commit the transaction.

8. Enter the Slave IO thread Slave creates an I/O thread which connects to the master Slave connects to the master just like any other client then starts a binlog dump process Master then creates a thread to send the binary log contents to a slave when the slave connects Slave IO thread writes the binary log events to the slaves relay log Once slave catches up with master, IO thread goes to sleep and waits for the master to signal it has new events

9. Slave SQL Thread Separates the actual execution of the binary log events from the retrieval of it on the master Read and replays the events from the relay log updates the slaves data to match the masters Has all privileges so it can run any query that is sent potential bottleneck

10. Types

11. Basic Info 3 binary log formats: – Statement Based Replication (SBR) – Row Based Replication (RBR) – Mixed The format of the binary log has no relevance to how the slave handles it. The SQL thread on the slave can and will handle any binary log format given to it controlled by setting the binlog_formatbinlog_format each format has its pros and cons

12. Statement Based Replication (SBR) Been used by all previous versions of replication Pros: – Proven – Less data written to log files. – Can be used for audit purposes Cons: – Some statements are unsafe Any nondeterministic behavior is difficult to replicate – More locking may be needed then Row Based – Complex statements will have to be evaluated and executed – Deterministic UDFs must be applied on the slaves – InnoDB: INSERT statement using AUTO_INCREMENT blocks other nonconflicting INSERT statements.INSERT

13. Row Based Replication (RBR) Replicates only the changed rows Pros: – All changes can be replicated – Safest form – Same as most other RDBMS – Fewer locks required Cons: – Generally more data to be logged – Some problems with older versions but fixed now – large BLOBs can take longer to replicate

14. Mixed Replication Uses both SBR and RBR Statement-based logging is used by default Automatically switches to row-based logging in particular cases – http://dev.mysql.com/doc/refman/5.1/en/binary-log-mixed.html http://dev.mysql.com/doc/refman/5.1/en/binary-log-mixed.html Can provide best of both worlds - but requires testing

15. Use Cases

16. ScaleOut Very common use case Scale out load to multiple servers – Reads can be sent to slaves – Writes are done on the Master Good for high read workloads Some improvement to writes if Master only writes

17. Data Redundancy Another common usage backups Failover Use as a testing system – test queries – application interaction Use different storage engine abilities

18. Analytics Reporting – different queries – long running – locking – caches DBA can query to learn about their data – distribution – trends

19. Long Distance Data Distribution Geographically separate locations – disaster recovery – Office wants to work on a local copy

20. Setting it up

21. Setting up Replication On the Master config file, need to add – log-bin=mysql_bin – server_id=1 On the Slave config file, need to add – server_id=2 Create the Replication User – requires REPLICATION SLAVE privilege mysql> CREATE USER 'repl'@'%.mydomain.com' IDENTIFIED BY 'slavepass'; mysql> GRANT REPLICATION SLAVE ON *.* TO 'repl'@'%.mydomain.com';

22. Setting up Replication (con’t) Get from Master – Obtain master server binary log coordinates mysql> FLUSH TABLES WITH READ LOCK; mysql> SHOW MASTER STATUS; – Copy the master (if not a new master) mysqldump or binary copy Finally ready! Actual steps for a new setup: 1. Configure Master; (re)start Master 2. Set up Replication User on Master 3. Get Master status 4. Release read locks on Master 5. Configure Slave; (re)start Slave 6. Execute CHANGE MASTER TO statement

23. mysql> CHANGE MASTER TO -> MASTER_HOST='master_host_name', -> MASTER_USER='replication_user_name', -> MASTER_PASSWORD='replication_password', -> [MASTER_PORT = port_num,] -> MASTER_LOG_FILE='recorded_log_file_name', -> MASTER_LOG_POS=recorded_log_position, -> [MASTER_SSL = {0|1},] -> [MASTER_SSL_CA = 'ca_file_name',] -> [MASTER_SSL_CAPATH = 'ca_directory_name',] -> [MASTER_SSL_CERT = 'cert_file_name',] -> [MASTER_SSL_KEY = 'key_file_name',] -> [MASTER_SSL_CIPHER = 'cipher_list',] -> [MASTER_SSL_VERIFY_SERVER_CERT = {0|1}] ;

24. Filtering rules

25. Filtering Rule Basics 2 levels of filtering – On the Master Not recommended – On the slave preferred Can be confusing

26. Filtering on the Master How it works: – binlog-do-db – binlog-ignore-db Not recommended - ever! – Reasons: audit point in time recovery crash recovery

27. Filtering on the Slave How it works: – replicate-do-db – replicate-ignore-db – replicate-do-table – replicate-ignore-table – replicate-wild-do-table – replicate-wild-ignore-table Avoid mixing “do” and “ignore” command Avoid mixing wildcard and nonwildcard options First checks DB level filtering and only if no matches moves on to the table level matching

28. Database Filters

29. Table Filters 1 Start (Following DB options) Any replicate- *-table options? execute UPDATE and Exit Which logging format? Statement Row For each statement that performs an update.. For each update of a table row... No Yes

30. Table Filters 2 (do/ignore) Any replicate- do-table options? execute UPDATE and Exit Any replicate- ignore-table options? Does the table match any of them? Yes No Yes No ignore UPDATE and Exit Does the table match any of them? Yes No

31. Table Filters 3 (wild do/wild ignore) Any replicate- wild-do-table options? execute UPDATE and Exit Any replicate- wild-ignore- table options? Does the table match any of them? Yes No Yes No ignore UPDATE and Exit Does the table match any of them? Yes No

32. Table Filters 4 Is there another table to be tested? Any replicate- do-table or replicate-wild- do-table options? Yes No ignore UPDATE and Exit Yes execute UPDATE and Exit

33. Monitoring

34. On the Master Not much info here Provides the File and Position Shows any filtering being done on the master Lists the binary logs on the server mysql> SHOW MASTER STATUS; +---------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +---------------+----------+--------------+------------------+ | mysql-bin.003 | 73 | test | manual,mysql | +---------------+----------+--------------+------------------+ mysql> SHOW BINARY LOGS; +---------------+-----------+ | Log_name | File_size | +---------------+-----------+ | binlog.000015 | 724935 | | binlog.000016 | 733481 | +---------------+-----------+

35. mysql> SHOW SLAVE STATUS\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: localhost Master_User: root Master_Port: 3306 Connect_Retry: 3 Master_Log_File: gbichot-bin.005 Read_Master_Log_Pos: 79 Relay_Log_File: gbichot-relay-bin.005 Relay_Log_Pos: 548 Relay_Master_Log_File: gbichot-bin.005 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: On the Slave

36. Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 79 Relay_Log_Space: 552 Until_Condition: None Until_Log_File: Last_SQL_Error: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 8 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error:

37. Questions?