Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 2 Signs, Signals, and Roadway Markings

Similar presentations

Presentation on theme: "Chapter 2 Signs, Signals, and Roadway Markings"— Presentation transcript:

1 Chapter 2 Signs, Signals, and Roadway Markings
Driver’s Education Chapter 2 Signs, Signals, and Roadway Markings

2 Shapes and Color Each sign shape and color has a special meaning. By knowing the meaning of these shapes and colors, you can get valuable information from a sign, even at a distance Regulatory Sign – such as a stop sign, controls traffic Warning Sign – alerts you to possible hazards and road conditions ahead Guide Sign – Give directions

3 Regulatory Signs Stop Sign – red octagon with white letters and border
Must always come to a full stop Once stopped you must yield the right of way to pedestrians or other vehicles.

4 Regulatory Signs Right of way – means that you accept the privilege of immediate use of the roadway 4 way stop (all way stop) First driver stopped goes first Vehicles stopped at the same time, vehicle on right goes first Driver turning left should wait for driver going straight

5 Regulatory Signs Yield Sign – red and white triangle
Always slow or stop, and give the right of way to traffic when approaching Can proceed without completely stopping, but always be prepared to stop Proceed without affecting the flow of traffic

6 Regulatory Signs Speed Limit Sign – used to manage traffic flow at safe speeds Speed limits are for ideal driving conditions Minimum Speed Limits – Set on expressways to keep traffic moving safely Advisory speed limits – set for special conditions like sharp curves and school zones

7 Regulatory Signs Other Signs Turns and Lanes One way
Control parking and passing

8 Warning Signs Diamond Shaped Warning Signs - most are diamond shaped with yellow background and black lettering Warn of danger ahead Be prepared to slow or stop when you see a warning sign

9 School Sign School Zone – is a portion of a street or highway near a school that is subject to special speed limits School Crossing – is a intersection or crossing used by school children

10 Construction Signs An orange sign in a diamond or rectangle shape
Be ready to stop, slow, or drive around workers and equipment Follow directions from signs and workers direction traffic New Jersey increases fines for violations in construction zones

11 Railroad Signs Railroad Crossing Sign – round yellow sign with a black X and 2 black R’s 250 ft before crossing in Urban area 750ft before crossing is rural area Crossbuck – the crossing will be marked with the crossbuck and may have flashing red lights or a gate

12 Guide Signs Local, state, and interstate routes are posted with route signs Signs vary according to the type of roadway Green signs provide information on destinations Blue signs guide you to services near the highway Brown signs indicate a point of interest Let Review the road signs.

13 Traffic Lights Green Light – Only proceed when intersection is clear.
Check traffic on all sides before entering intersection When approaching light that has been green awhile, but prepared for the light to turn yellow The green light will be on the bottom of the traffic signal Yellow Light – Make every effort to stop a safely for a yellow light. If you are to close to stop safely, proceed with caution and exit the intersection before the light turns red The yellow light will appear in the middle of the traffic signal

14 Traffic Lights Red Light – You must come to a full stop. Stop behind line, crosswalk, or before entering intersection if no lines. Top light on traffic signal

15 Right Turn on Red This is making a right turn when the traffic signal is red. Treat light like stop sign If no turn on red sign is posted. You can not make the turn

16 Flashing Signals Alerts drivers to dangerous conditions ahead or tells them to stop Flashing red light make full stop Flashing yellow, slow down and be prepared to stop

17 Roadway Markings Gives you warning or direction. These are lines, words, or arrows painted on the roadway. Broken Yellow Line – separates two way traffic and may pass when no traffic is coming from the opposite direction

18 Roadway Markings Solid Yellow Line – indicates that passing is not allowed Turning left across a solid line is allowed after yielding to oncoming traffic

19 Roadway Markings Broken White lines – separate lanes of traffic moving in the same direction Solid white lines keep drivers in their lanes and you should not cross them Solid white lines are also used in crosswalks and stop lines

20 Roadway Markings White arrows in lanes tell you when and where to turn
If you are in a lane with an arrow you must continue in the direction of the arrow

21 Roadway Markings Rumble Strips – are short sections of corrugated roadway They alert you by noise when you drive over them Also used before unexpected stops like a toll plaza

22 Roadway Markings Curbs alongside a road may be painted to indicate warnings or that parking is not permitted Also check for signs that say handicapped parking only

23 Slow down and make every attempt to stop

24 Flashing Yellow Slow down proceed with caution

25 Stop, yield to traffic and pedestrians
Flashing Red Light Stop, yield to traffic and pedestrians

26 Do not cross street

27 Crossing Permitted

28 Motorist Services and Information

29 Road Construction Signs

30 School zone/crossing

31 Railroad Crossing

32 Warning Signs/Roadway Hazards

33 No passing in either direction

34 Passing permitted on right side/No passing on left side

35 Passing Permitted, Both lanes same direction

36 Crosswalk, Pedestrian Crossing Zone, Yield to Pedestrians

Download ppt "Chapter 2 Signs, Signals, and Roadway Markings"

Similar presentations

Ads by Google