1. PLASTICS The plastic is an organic substance which consists of natural or synthetic binders or resins with or without moulding compounds.

2. Ken YoussefiMechanical Engineering2 Why Design with Plastics? Corrosion resistance Low electrical and thermal conductivity, insulator Easily formed into complex shapes, can be formed, casted and joined. Wide choice of appearance, colors and transparencies

3. Ken YoussefiMechanical Engineering3 Disadvantages of using Plastics Low strength Low useful temperature range (up to 600 o F) Less dimensional stability over period of time (creep effect) Aging effect, hardens and become brittle over time Sensitive to environment, moisture and chemicals Poor machineability

4. PROPERTIES OF PLASTICS It is light in weight. Specific gravity of plastic is 1.40. They have low electrical conductivity. They have low thermal conductivity They can absorb shocks. USES To make waterproof doors, pipes, bags. To make furniture. To make optical lenses, frames. For electrical & thermal conductivity.

5. 5 Classification of polymers Thermoplastics As the temperature is raised above the melting point, the secondary bonds weaken, making it easier to form the plastic into any desired shape. When polymer is cooled, it returns to its original strength and hardness. The process is reversible. Polymers that show this behavior are known as thermoplastics. Thermosetting Plastics (thermosets) Thermosetting plastics are cured into permanent shape. Cannot be re-melted to the flowable state that existed before curing, continued heating for a long time leads to degradation or decomposition. This curing (cross-linked) reaction is irreversible. Thermosets generally have better mechanical, thermal and chemical properties. They also have better electrical resistance and dimensional stability than do thermoplastics. There are two major classifications of polymers

6. General properties: low melting point, softer, flexible. Typical uses: bottles, food wrappers, toys, … Examples: Polyethylene: packaging, electrical insulation, milk and water bottles, packaging film Polypropylene: carpet fibers, automotive bumpers, microwave containers, prosthetics Polyvinyl chloride (PVC): electrical cables cover, credit cards, car instrument panels Polystyrene: disposable spoons, forks, Styrofoam™ Acrylics (PMMA: polymethyl methacrylate): paints, fake fur, plexiglass Polyamide (nylon): textiles and fabrics, gears, bushing and washers, bearings PET (polyethylene terephthalate): bottles for acidic foods like juices, food trays PTFE (polytetrafluoroethylene): non-stick coating, Gore-Tex™ (raincoats), dental floss Plastic types: Thermoplastics

7. General properties: more durable, harder, tough, light. Typical uses: automobile parts, construction materials. Plastic types: Thermosets Examples: Unsaturated Polyesters: varnishes, boat components, furniture Epoxies and Resins:glues, coating of electrical circuits, composites: fiberglass in helicopter blades, boats, …

8. Plastic types: Elastomers General properties: these are thermosets, and have rubber-like properties. Typical uses: medical masks, gloves, rubber-substitutes Examples: Polyurethanes: mattress, cushion, insulation, toys Silicones: surgical gloves, oxygen masks in medical applications joint seals

9. Manufacturing Processes of plastics Casting molding Injection molding lamination Compression molding Extrusion

10. IT 208Chapter 1810 Manufacturing With Plastics Casting - filling a mold Liquid resins (epoxy) Hot melted plastic poured into a casting (nylon) Slush casting for thin walled products (snow boots, gloves, toys) Wet spinning -fibers formed by spinning the solution through multi-hole dies Rotational molding - variation of slush casting, mold is heated as it is rotated. Works exceptionally well for larger parts (IDOT barrels, chemical containers)

11. IT 208Chapter 1811 Manufacturing With Plastics Molding - melt processing-polymers are deformed with the aid of applied pressure Results in a finished part Need three things to be a molding operation (Time, temperature, and pressure)

12. IT 208Chapter 1812 Molding Process Injection molding Similar to die casting metal. Pellets are fed into heated cylinder where they are melted. The screw rotates much like extrusion molder (it moves back as material in front of it are melted) then it rams forward pushing the melted material into the die. most wide spread technique for making 3-D configurations uses either reciprocating screw or reciprocating plunger (RAM) rated by clamping pressure of die

13. IT 208Chapter 1813 Injection Molding

14. Compression Moulding 1. The mould is charged with a measured amount of powder or granules ready to be compressed. Sometimes plastic charge is first compacted into a shape called a preform. 2. When the two halves of the mould are brought together the plastic material is forced under compression to flow rapidly around the cavity. heat from the platens causes the plastic to cure resulting in a permanent change in shape.

15. Compression Moulding The component is ejected from the mould and any excess material formed at edges (flash) is removed. Materials used. Typical thermosetting plastics used in compression moulding are urea formaldehyde and phenol formaldehyde.

16. Extrusion Continuous process used to produce both solid and hollow products that have a constant cross-section. E.g. window frames, hose pipe, curtain track, garden trellis. Thermoplastic granules are fed from a hopper by a rotating screw through a heated cylinder. The tapered screw compacts the plastic as it becomes elasticised. The die which is fitted to the end of the extruder barrel determines the cross-section of the extrusion. Thicker cross-sections are extruded more slowly as more time is required for the initial heating and subsequent cooling of the larger quantities of material which are involved. As the extrusion leaves the die it is cooled by passing through a cooling trough (below) containing cold water.

17. Extrusion

18. Plastics Processing: Extrusion

19. 19 Epoxy is the cured end product of epoxy resins, as well as a colloquial name for the epoxide functional group Resin in the most specific use of the term is a hydrocarbon secretion of many plants, particularly coniferous trees. Molding or moulding (see spelling differences) is the process of manufacturing by shaping liquid or pliable raw material using a rigid frame called a mold or matrix. This itself may have been made using a pattern or model of the final object.spelling differencesmanufacturing

20. Thank you