1. H101 Video Conference Room Instructions, Presets and More

2. Topics: Click on a link Optimal Room Layout Equipment Rack Layout Getting Started Dialing Controls Computer-Laptop & VCR & DVD Dialing Multipoint Dialing Camera Controls Exiting and shutting down system About Presets Presets

3. Optimal Room Layout Overhead DiagramVisual Layout Head Table Presentation Area

4. Optimal Room Layout Screens, Monitors and Equipment Rack Since this room is a general use room we have to return chairs and tables back to the VC Layout.

5. Equipment Rack Touch Screen VCR Computer Laptop connector cable

6. Getting Started with Video Conferencing A.To activate screen please press screen B.Press the “Conferencing” button to access the Conferencing screen. C.Once you have pressed this button, the next screen will appear, giving you the option to press the “Video Conference” button.

7. Getting Started with Video Conferencing D.The next screen will appear, giving you the option to enter the Access Code. If you don’t have one, Please call the helpdesk at X81377 to obtain one. E.Press “Video Conference”

8. Dialing Controls F.Once you have entered your access code, the “Dialing Controls” screen will appear, giving you the option to enter the IP address of your destination. G.Please press ‘”ON” button beside display controls to turn on monitor mounted to the wall and the projector

9. Computer and/or Laptop VCR/DVD H.Turn ON computer and/ or connect Laptop to long extension. The cable has 2 connectors One video connector and one audio connector. I.Make sure audio cable goes into earphone jack of Laptop and NOT the mic Jack J.On the Rack PC the log in Username : Anyone Password is left empty you can then plug USB Key in K.You can also put VCR tape in player L.DVD s go into DVD player on computer k

10. Dialing M.Push “Directory” on touch screen and you will your will see the directory on the monitor mounted on wall. N.You can use arrows to navigate the directory O.Press “Select” or “Call /Hang up” to dial P.This example has the highlighting on CSB3702 in this picture a

11. Camera controls Q.Press “Guest PC” and then “Data send” to display of laptop to the Far site R.Press “Rack PC” and then “Data Send” to send the display of rack pc to the Far site S. If you do not see display from Guest PC you will have to follow the following instructions. T.Press Function key and F5 and you will able to project laptop screen Note the Function key may differ from brand to brand. U.When connected you can go into Camera controls to set your camera “NEAR button” in proper position using arrows so the other group can view you properly. You can also control the Front camera and Back camera. You can also control “FAR” end camera so you can view properly. V.You can also increase the volume so you can hear the people at the ‘FAR’ a

12. Exiting and shutting down system When finished please press “Call-Hang up” twice to end the video conference. You do not always have to do this step if far end disconnects call. Press “Dialing controls” Then Press “Off” beside Display controls to turn off wall mounted monitor and Press “Exit” Shutdown Rack PC or Guest PC Roll up chords for mouse and laptop cable if necessary. Put away keyboard and mouse in drawer.

13. Multipoint dialing Once connected Push “Directory” on touch screen and you will your will see the directory on the monitor mounted on wall. You can use arrows to navigate the directory Press “Select” or “Call /Hang up” to dial

14. PRESETS :Video Conference Remote  To use presets start by 1) selecting near camera  Press from 2) 1 to 6 on the number pad to select preset camera angle  The next pages will give you a overhead view of what the cameras preseats will be able to view

15. Preset #1

16. Preset #2

17. Preset #3

18. Preset #4

19. Preset #5

20. Preset #6