1. James Cain 10/17/14

2.  Model a baseball and baseball bats in Abaqus/CAE  Perform a dynamic analysis on the bat-ball interaction in Abaqus/Explicit  Modify models with different physical properties such as material, mass, and size  Compare the analytical results of the bat performance to experimental data

3.  Baseball consists of four different materials ◦ Cork ◦ Rubber ◦ Wool ◦ Cowhide Material Properties of a Baseball Density (lb/in 3 ) Short-Time Shear Modulus (psi) Long-Time Shear Modulus (psi) Decay ConstantBulk Modulus (psi).02844981492502513495

4.  Average baseball diameter is 2.90” FEA model of a baseball

5.  Bat materials chosen are ash, aluminum, and aluminum BBCOR  Research for aluminum BBCOR properties is ongoing Material Properties of Ash Density (lb/in 3 ) Elastic Modulus (psi)Shear Modulus (psi)Poisson’s Ratio E1E1 E2E2 E3E3 G 12 G 23 G 13 ν 12 ν 23 ν 13 0.0282.02x10 6 1.93x10 5 2.13x10 5 1.78x10 5 2.03x10 4 1.20x10 5 0.40.5 Material Properties of Aluminum Density (lb/in 3 )Elastic Modulus (psi)Poisson’s Ratio 0.097510x10 6 0.33

6.  Bat length, barrel diameter, and handle diameter are same size for all three bats ◦ Length: 34” ◦ Barrel diameter: 2.5” ◦ Handle Diameter: 1.0”  Ash bat is solid, whereas aluminum bats have solid handle and hollow barrel with 0.1” thick wall

7. FEA model of a wood baseball bat

8. FEA model of the aluminum bats showing hollow barrel

9.  FEMs of baseball and bats created  Material properties assigned to models ◦ Baseball = Viscoelastic ◦ Wood bat = Orthotropic ◦ Aluminum bat = Elastic  Assembly and steps created  Interactions and constraints applied to bat and ball  Boundary conditions and predefined fields defined  Bat and ball meshed with tetrahedral elements

12.  Milestones ◦ Research material properties for BBCOR aluminum bat ◦ Research experimental data on wood and metal baseball bat performances ◦ Run FEM to determine effects of different variables and process results ◦ Compare FEA results to experimental data  Deadlines ◦ Second Progress Report October 17, 2014 ◦ Final Draft November 7, 2014 ◦ Preliminary Final Report November 28, 2014 ◦ Final Report December 12, 2014