Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 19 Aldehydes and Ketones: Nucleophilic Addition Reactions

Similar presentations


Presentation on theme: "Chapter 19 Aldehydes and Ketones: Nucleophilic Addition Reactions"— Presentation transcript:

1 Chapter 19 Aldehydes and Ketones: Nucleophilic Addition Reactions

2 Aldehydes and Ketones Aldehydes (RCHO) and ketones (R2CO) are characterized by the carbonyl functional group (C=O) The compounds occur widely in nature as intermediates in metabolism and biosynthesis

3 Why this Chapter? Much of organic chemistry involves the chemistry of carbonyl compounds Aldehydes/ketones are intermediates in synthesis of pharmaceutical agents, biological pathways, numerous industrial processes An understanding of their properties is essential

4 19.1 Naming Aldehydes and Ketones
Aldehydes are named by replacing the terminal –e of the corresponding alkane name with –al TThe parent chain must contain the –CHO group hThe –CHO carbon is numbered as C1 If the –CHO group is attached to a ring, use the suffix carbaldehyde

5 Naming Ketones Replace the terminal -e of the alkane name with –one
Parent chain is the longest one that contains the ketone group Numbering begins at the end nearer the carbonyl carbon

6 Ketones with Common Names
IUPAC retains well-used but unsystematic names for a few ketones

7 Ketones and Aldehydes as Substituents
The R–C=O as a substituent is an acyl group, used with the suffix -yl from the root of the carboxylic acid CH3CO: acetyl; CHO: formyl; C6H5CO: benzoyl The prefix oxo- is used if other functional groups are present and the doubly bonded oxygen is labeled as a substituent on a parent chain

8 19.2 Preparing Aldehydes and Ketones
Oxidize primary alcohols using pyridinium chlorochromate Alkenes with a vinylic hydrogen can undergo oxidative cleavage when treated with ozone, yielding aldehydes Reduce an ester with diisobutylaluminum hydride (DIBAH)

9 Preparing Ketones Oxidize a 2° alcohol
Many reagents possible: choose for the specific situation (scale, cost, and acid/base sensitivity)

10 Ketones from Ozonolysis
Ozonolysis of alkenes yields ketones if one of the unsaturated carbon atoms is disubstituted

11 Aryl Ketones by Acylation
Friedel–Crafts acylation of an aromatic ring with an acid chloride in the presence of AlCl3 catalyst

12 Methyl Ketones by Hydrating Alkynes
Hydration of terminal alkynes in the presence of Hg2+ (catalyst: Section 8.4)

13 19.3 Oxidation of Aldehydes and Ketones
CrO3 in aqueous acid oxidizes aldehydes to carboxylic acids efficiently Silver oxide, Ag2O, in aqueous ammonia (Tollens’ reagent) oxidizes aldehydes

14 Hydration of Aldehydes
Aldehyde oxidations occur through 1,1-diols (“hydrates”) Reversible addition of water to the carbonyl group Aldehyde hydrate is oxidized to a carboxylic acid by usual reagents for alcohols

15 Ketones Oxidize with Difficulty
Undergo slow cleavage with hot, alkaline KMnO4 C–C bond next to C=O is broken to give carboxylic acids Reaction is practical for cleaving symmetrical ketones

16 19.4 Nucleophilic Addition Reactions of Aldehydes and Ketones
Nu- approaches 75° to the plane of C=O and adds to C A tetrahedral alkoxide ion intermediate is produced

17 Nucleophiles Nucleophiles can be negatively charged ( :Nu) or neutral ( :Nu) at the reaction site The overall charge on the nucleophilic species is not considered

18 Relative Reactivity of Aldehydes and Ketones
Aldehydes are generally more reactive than ketones in nucleophilic addition reactions The transition state for addition is less crowded and lower in energy for an aldehyde (a) than for a ketone (b) Aldehydes have one large substituent bonded to the C=O: ketones have two

19 Electrophilicity of Aldehydes and Ketones
Aldehyde C=O is more polarized than ketone C=O As in carbocations, more alkyl groups stabilize + character Ketone has more alkyl groups, stabilizing the C=O carbon inductively

20 Reactivity of Aromatic Aldehydes
Less reactive in nucleophilic addition reactions than aliphatic aldehydes Electron-donating resonance effect of aromatic ring makes C=O less reactive electrophile than the carbonyl group of an aliphatic aldehyde

21 19.5 Nucleophilic Addition of H2O: Hydration
Aldehydes and ketones react with water to yield 1,1-diols (geminal (gem) diols) Hyrdation is reversible: a gem diol can eliminate water

22 Base-Catalyzed Addition of Water
Addition of water is catalyzed by both acid and base The base-catalyzed hydration nucleophile is the hydroxide ion, which is a much stronger nucleophile than water

23 Acid-Catalyzed Addition of Water
Protonation of C=O makes it more electrophilic

24 Addition of H–Y to C=O Reaction of C=O with H-Y, where Y is electronegative, gives an addition product (“adduct”) Formation is readily reversible

25 19.6 Nucleophilic Addition of HCN: Cyanohydrin Formation
Aldehydes and unhindered ketones react with HCN to yield cyanohydrins, RCH(OH)CN Addition of HCN is reversible and base-catalyzed, generating nucleophilic cyanide ion, CN- Addition of CN to C=O yields a tetrahedral intermediate, which is then protonated Equilibrium favors adduct

26 Uses of Cyanohydrins The nitrile group (CN) can be reduced with LiAlH4 to yield a primary amine (RCH2NH2) Can be hydrolyzed by hot acid to yield a carboxylic acid

27 19.7 Nucleophilic Addition of Grignard Reagents and Hydride Reagents: Alcohol Formation
Treatment of aldehydes or ketones with Grignard reagents yields an alcohol Nucleophilic addition of the equivalent of a carbon anion, or carbanion. A carbon–magnesium bond is strongly polarized, so a Grignard reagent reacts for all practical purposes as R:  MgX+.

28 Mechanism of Addition of Grignard Reagents
Complexation of C=O by Mg2+, Nucleophilic addition of R: , protonation by dilute acid yields the neutral alcohol Grignard additions are irreversible because a carbanion is not a leaving group

29 Hydride Addition Convert C=O to CH-OH
LiAlH4 and NaBH4 react as donors of hydride ion Protonation after addition yields the alcohol

30 19.8 Nucleophilic Addition of Amines: Imine and Enamine Formation
RNH2 adds to R’2C=O to form imines, R’2C=NR (after loss of HOH) R2NH yields enamines, R2NCR=CR2 (after loss of HOH) (ene + amine = unsaturated amine)

31 Mechanism of Formation of Imines
Primary amine adds to C=O Proton is lost from N and adds to O to yield an amino alcohol (carbinolamine) Protonation of OH converts it into water as the leaving group Result is iminium ion, which loses proton Acid is required for loss of OH– too much acid blocks RNH2

32 Imine Derivatives Addition of amines with an atom containing a lone pair of electrons on the adjacent atom occurs very readily, giving useful, stable imines For example, hydroxylamine forms oximes and 2,4-dinitrophenylhydrazine readily forms 2,4-dinitrophenylhydrazones These are usually solids and help in characterizing liquid ketones or aldehydes by melting points

33 Enamine Formation After addition of R2NH and loss of water, proton is lost from adjacent carbon

34 19.9 Nucleophilic Addition of Hydrazine: The Wolff–Kishner Reaction
Treatment of an aldehyde or ketone with hydrazine, H2NNH2, and KOH converts the compound to an alkane Originally carried out at high temperatures but with dimethyl sulfoxide as solvent takes place near room temperature

35 19.10 Nucleophilic Addition of Alcohols: Acetal Formation
Alcohols are weak nucleophiles but acid promotes addition forming the conjugate acid of C=O Addition yields a hydroxy ether, called a hemiacetal (reversible); further reaction can occur Protonation of the –OH and loss of water leads to an oxonium ion, R2C=OR+ to which a second alcohol adds to form the acetal

36 Uses of Acetals Acetals can serve as protecting groups for aldehydes and ketones It is convenient to use a diol to form a cyclic acetal (the reaction goes even more readily)

37 19.11 Nucleophilic Addition of Phosphorus Ylides: The Wittig Reaction
The sequence converts C=O to C=C A phosphorus ylide adds to an aldehyde or ketone to yield a dipolar intermediate called a betaine The intermediate spontaneously decomposes through a four-membered ring to yield alkene and triphenylphosphine oxide, (Ph)3P=O Formation of the ylide is shown below

38 Mechanism of the Wittig Reaction

39 Uses of the Wittig Reaction
Can be used for monosubstituted, disubstituted, and trisubstituted alkenes but not tetrasubstituted alkenes The reaction yields a pure alkene of known structure For comparison, addition of CH3MgBr to cyclohexanone and dehydration with, yields a mixture of two alkenes

40 19.12 Biological Reductions
The adduct of an aldehyde and OH can transfer hydride ion to another aldehyde C=O resulting in a simultaneous oxidation and reduction (disproportionation)

41 19.13 Conjugate Nucleophilic Addition to -Unsaturated Aldehydes and Ketones
A nucleophile can add to the C=C double bond of an ,b-unsaturated aldehyde or ketone (conjugate addition, or 1,4 addition) The initial product is a resonance-stabilized enolate ion, which is then protonated

42 Conjugate Addition of Amines
Primary and secondary amines add to , b-unsaturated aldehydes and ketones to yield b-amino aldehydes and ketones

43 Conjugate Addition of Alkyl Groups: Organocopper Reactions
Reaction of an ,b-unsaturated ketone with a lithium diorganocopper reagent Diorganocopper (Gilman) reagents form by reaction of 1 equivalent of cuprous iodide and 2 equivalents of organolithium 1, 2, 3 alkyl, aryl and alkenyl groups react but not alkynyl groups

44 Mechanism of Alkyl Conjugate Addition: Organocopper Reactions
Conjugate nucleophilic addition of a diorganocopper anion, R2Cu, to an enone Transfer of an R group and elimination of a neutral organocopper species, RCu

45 19.14 Spectroscopy of Aldehydes and Ketones
Infrared Spectroscopy Aldehydes and ketones show a strong C=O peak 1660 to 1770 cm1 aldehydes show two characteristic C–H absorptions in the 2720 to 2820 cm1 range.

46 C=O Peak Position in the IR Spectrum
The precise position of the peak reveals the exact nature of the carbonyl group

47 NMR Spectra of Aldehydes
Aldehyde proton signals are near  10 in 1H NMR - distinctive spin–spin coupling with protons on the neighboring carbon, J  3 Hz

48 13C NMR of C=O C=O signal is at  190 to  215
No other kinds of carbons absorb in this range

49 Mass Spectrometry – McLafferty Rearrangement
Aliphatic aldehydes and ketones that have hydrogens on their gamma () carbon atoms rearrange as shown

50 Mass Spectroscopy: -Cleavage
Cleavage of the bond between the carbonyl group and the  carbon Yields a neutral radical and an oxygen-containing cation

51 Let’s Work a Problem The SN2 reaction of (dibromomethyl)benzene, C6H5CHBr2, with NaOH yields benzldehyde rather than (dihydroxymethyl)benzene, C6H5CH(OH)2. Explain this finding.

52 Answer The SN2 reaction of the OH ion on C6H5CHBr2 results in a very unstable bromoalcohol intermediate. This intermediate quickly loses HBr - to give benzaldehyde.


Download ppt "Chapter 19 Aldehydes and Ketones: Nucleophilic Addition Reactions"

Similar presentations


Ads by Google