1. Introduction to SAS Essentials Mastering SAS for Data Analytics
Alan Elliott and Wayne Woodward
SAS Essentials - Elliott & Woodward

2. Chapter 1: Getting Started
SAS Essentials - Elliott & Woodward

3. LEARNING OBJECTIVES
To be able to use the SAS® software program in a Windows environment
To understand the basic information about getting data into SAS and running a SAS program.
To be able to run a simple SAS program.
SAS Essentials - Elliott & Woodward

4. The Statistics Software Landscape
SAS – largest, highly used in corporate and university research settings, has several interfaces
SPSS – IBM bought them recently – widely used in social sciences (and now more in business) – Quick to learn in menu mode
STATA – Relatively new, command/code oriented
JMP – a SAS product that is highly visual and menu driven
R – a user supported programming language, free and expansive, but a larger learning curve
EXCEL – has some statistical functions and procedures
WINKS – Simple, low cost general use statistics program, with a special version for Time Series
MINITAB – Used in a number of intro stat courses
SAS Essentials - Elliott & Woodward

5. Introducing SAS
SAS is a programming language that specializes in data analytics.
There are several ways to use SAS – this book teaches you how to use SAS code, which provides the most flexibility.
We’ll be using SAS in a Windows environment, although SAS is available on most platforms
A brief tutorial on the University Edition is in the book’s appendix
Also, information on using the Citrix SAS (Apps) version is included in the text
SAS Essentials - Elliott & Woodward

6. Getting Started – Download Example Files
Getting the data needed for the course
Data files are available at
http//:
Choose one of two options to download files:
OPTION 1 - Download self-extracting files (copies SAS files to your hard disk, default location is C:\SASDATA) Recommended.
OPTION 2 – Download a zipped version of data files (You'll need a zip extractor such as WINZIP to extract files using this method.)
SAS Essentials - Elliott & Woodward

7. 1.1 Using SAS in A Windows Environment
SAS runs on a number of computer platforms (operating systems) including mainframes and personal computers whose operating systems are UNIX, Mac OS X, Linux, or Windows.
This book is based on using SAS in a Windows environment where you have the software installed on your local computer. The vast majority of the content in this book will apply to any SAS computer environment
SAS Essentials - Elliott & Woodward

8. Creating a Folder for Storing Your SAS Files
Install the data and SAS programming files in your (Windows) C:\SASDATA folder.
We’ll be accessing SAS files from the C:\SASDATA folder on your computer
Your Hard Disk
C:\SASDATA
SAS Program
If you are using the University edition, consult Appendix E regarding the location of the data files.
For other versions of SAS, see Table 1.1 on page 4 for information on accessing files.
SAS Essentials - Elliott & Woodward

9. Understanding the SAS Interface
LOG Window
Explorer &
Results
Program Editor
NOTE TABS
SAS Essentials - Elliott & Woodward

10. SAS Editor
Also called the Enhanced Editor or Windows Programming Editor (WPGM), this is the area where you write SAS code. It is like a simple word processor. When you open a previously saved SAS program, its contents will appear in this window.
SAS code is stored in plain ASCII text, so files saved in the ASCII format from any other editor or word processor may be easily opened in this editor.
You can also copy (or cut) text from another editor or word processor and paste it into the Editor window.
SAS Essentials - Elliott & Woodward

11. SAS Log
When you run a SAS program, a report detailing how (and if) the program ran, appears in the LOG window. Typically, when you run a SAS program, you will first look at the contents of the LOG window to see if there were any errors in the program. Errors appear in red. You should also look for warnings and other notes in the LOG Window to that tell you that some part of your program may not have run correctly.
SAS Essentials - Elliott & Woodward

12. SAS Explorer/Results Window
This window appears at the left of the screen and contains two tabs: The Results tab displays a tree listing of your output, making it easy to quickly scroll to any place in your output listing. The Explorer tab displays the available SAS libraries – these libraries are where SAS data files are stored.
SAS Essentials - Elliott & Woodward

13. Graph Window
If your SAS program creates graphic output, SAS will display a Graph window that contains the SAS graph. It is usually automatically displayed. If it does not appear click on the Graph tab to display this window.
SAS Essentials - Elliott & Woodward

14. Results Viewer
Beginning with SAS 9.3, SAS displays output from your SAS analysis in HTML format in the Results Viewer. We’ll discuss more about how to control this output in the section on Output Delivery System (ODS)
SAS Essentials - Elliott & Woodward

15. Oops… What if you close one of these Windows?
Reopen it by going to the View pull-down menu and select the windows you want to reopen
SAS Essentials - Elliott & Woodward

16. 1.2 Your First SAS Analysis
In SAS, choose File/Open Program… and open the program named C:\SASDATA\First.SAS
SAS Essentials - Elliott & Woodward

17. Note Sections in Code This section defines the data for the analysis
This section defines an analysis
SAS Essentials - Elliott & Woodward

18. Defining a Data Set
We’ll discuss this more in detail later, but notice that this code defines data set named EMPLOYEES that consists of two variables GENDER and AGE.
SAS Essentials - Elliott & Woodward

19. Requesting an Analysis
The second section of the code requests an analysis. In this case, the requested analysis is called “MEANS” (which indicates simple statistics) and the CLASS (classification or grouping) of the data is request by GENDER.
SAS Essentials - Elliott & Woodward

20. Run the code
To tell SAS to run (Submit) this code, click on the “Running Man” icon or select Run/Submit
SAS Essentials - Elliott & Woodward

21. Output Created, Results Window
The output created by this simple program displays simple statistics for the numeric variables (AGE) in the data set – By Gender. This type output is HTML.
SAS Essentials - Elliott & Woodward

22. What to do with output You can print from either window
Save the output
Copy and paste the results in Word, PowerPoint, etc.
Later, we’ll see how to automatically output the analyses to .DOC, .PDF, etc
SAS Essentials - Elliott & Woodward

23. Do Hands-On Example p 9 Make sure you are in the Editor window
Open Second.SAS
Add a line to the program.
Run the program and observe the output
SAS Essentials - Elliott & Woodward

24. Results
SAS Essentials - Elliott & Woodward

25. 3. Run the program and observe the output (in the Results Viewer).
1.3 How SAS Works
1. Define a data set in SAS using the DATA step (which begins with the key word DATA.) In this case, the data values are a part of the code (although it is not always the case.) The data values to be used in this analysis follow the keyword DATALINES.
2. Once you have a data set of values, you can tell SAS what analysis to perform using a procedure (PROC) statement In this case, the keywords PROC MEANS initiate the "MEANS" procedure.
3. Run the program and observe the output (in the Results Viewer).
SAS Essentials - Elliott & Woodward

26. 1.4 Tips and Tricks for Running SAS
Within a SAS program, each statement begins with an identifying keyword (DATA, PROC, INPUT, DATALINES, RUN, etc.) and ends with a semicolon “;”. For example:
DATA TEMP;
PROC PRINT DATA=TEMP;
RUN;
All three lines start with a SAS keyword…
SAS Essentials - Elliott & Woodward

27. SAS Tips continued… Statements can begin anywhere and end anywhere.
Statements can continue over several lines, ends with semi‑colon.
Several statements may be on the same line.
Blanks, as many as you want but at least one, separating the components (words) in a SAS program statement.
Case, (lower and upper) doesn’t matter in most SAS statements.
Case does make a difference in data and quoted information. (such as M or m for “MALE” or “male”).
SAS Essentials - Elliott & Woodward

28. SAS Tips Continued…
The most common error in SAS programming is a misplaced (or missing) semicolon.
A second common error is a missing RUN; statement.
A third common error in a SAS program is the presence of unbalanced quotation marks.
Look for errors in a program log from the top down.
If program errors cause problems that result in SAS “freezing up” or not completing the steps in your program, a way to stop SAS from continuing to run is to press CTRL-Break and to select the “Cancel Submitted Statements” option.
If you cannot resolve a problem within SAS, save your files, exit the SAS program, and restart.
Make the structure of your SAS programs easy to read.
SAS Essentials - Elliott & Woodward

29. Enhanced Editor Green - Comments appear in green.
Dark Blue - Major SAS commands (also called “step- boundaries”) begin with the keyword in dark blue.
Blue - Keywords that have special meaning as SAS commands appear in blue.
Yellow highlight - Data are highlighted in yellow.
Boundary Line - A section boundary line separates each step.
SAS Essentials - Elliott & Woodward

30. SAS Function Keys (Defined)
SAS command
Result F2
RESHOW
reshows window interrupted by system command F3
end; /*gsubmit buffer=default*/
submits SAS statements in clipboard F4
recall
recalls current SAS code to editor F5
program (PGM)
display SAS program editor window F6
log
displays SAS log window F7
output
displays SAS output window F8
zoom off;submit
submits (runs) the current SAS program F9
KEYS
displays keys window
F10
Not defined
F11
command bar
moves cursor to command bar
F12
Not definEd
SAS Essentials - Elliott & Woodward

31. Define a new F12 Key (page 13)
Step 1: Select Tools, Options, and Keys.
Step 2: Next to the blank F12 option enter this code: CLEAR LOG; ODSRESULTS; CLEAR; WPGM; (Press the Enter key to lock in the new command.)
Step 3: Exit the Key Window and try out this function key by re-running one of the previous examples. With the output displayed on the screen, press F12. The output will be cleared, the log file information will be cleared and the editor window will be displayed still containing the current program code. Thus, this command allows you to quickly clear the log and output windows while keeping the program code.
SAS Essentials - Elliott & Woodward

32. SAS Menus (Change depending on Window)
File Menu - Used for opening and saving files, and for printing.
Edit Menu - Used to copy, cut and paste text, as well as to find and replace text.
View Menu - Allows you to go back and forth between viewing SAS editor, log and output windows.
Tools - Allows you to open programs for graphic, image, and text editing, along with other options available to customize the program to your preferences.
Run - Allows you to run (submit) a SAS program and also contains options for accessing remote SAS options.
Solutions - Contains links to SAS programs that allow you to interactively design, select, and perform analyses.
Window - Contains options found in most Windows program that allow you to choose display strategies for opened windows such as tiled, cascade, etc. Also allows you to select a particular window to open such as Log, Output, etc.
Help - Contains options for the SAS Help System as well as online documentation.
SAS Essentials - Elliott & Woodward

33. Common File Extensions
SAS Code File (filename.sas): This is an ACSII text file and may be edited using the SAS Editor, Notepad, or any text editor that can read an ASCII file.
SAS Log File (filename.log): This ASCII text file contains information such as errors, warnings, and data set details for a submitted SAS program.
SAS Results File (filename.mht or filename.html): This file contains theweb-formatted output such as that displayed in the Results Viewer. HTML standsfor Hyper-Text Markup Language and is the common language of Internet web files.
MHT is short for MHTML and stands for Microsoft (or MIME) Hypertext Archive file. It is a type of HTML file that contains the entire html-coded information in a single file (whereas HTML files may access external files for some components such as graphs.)
SAS Essentials - Elliott & Woodward

34. More extensions
SAS Data File (filename.sas7bdat): This file contains a SAS data set that includes variable names, labels, and the results of calculations you may have performed in a DATA step. You cannot open or read this file except in SAS or in a few other programs that can read SAS data files.
Raw Data Files (filename.dat or filename.txt or filename.csv): These ASCII (text) files contain raw data that can be imported into SAS or edited in an editor such as Notepad.
Excel File (filename.xls or filename.xlsx): The data in a Microsoft Excel file (when properly formatted into a table of columnar data) can be imported into SAS. (We’ll discuss data file types that can be imported into SAS in Chapter 3.)
SAS Essentials - Elliott & Woodward

35. Help -> SAS Help and Documentation
SAS Essentials - Elliott & Woodward

36. 1.5 Summary, Chapter 1
This chapter provided an overview of SAS and examples of how to run an existing SAS program. In the following chapters, we will discuss the components of a SAS program, including how to enter data, how to request analyses, and how to format and read output.
Continue to Chapter 2: Getting Data Into SAS.
SAS Essentials - Elliott & Woodward