1. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER

2. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER  Type Model configuration  Model configuration

3. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER 150%/1Hz high starting torque by general-purpose magnetic flux vector control General-purpose magnetic flux vector control and auto tuning function are available.(Same as E500) It ensures operation that requires high starting torque, such as transfer machine including conveyer, hoist, lift, etc., washing machine, and agitators. High torque 150%/1Hz and 200%/3Hz are realized Auto tuning Many kinds of motors can be optimally controlled with Mitsubishi original "non-rotation " auto tuning. (R1 constants tuning) High Starting Torque

4. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER A brake transistor is built-in to the 0.4K to 7.5K. Connecting an optional brake resistor increases regeneration capability. It is useful for deceleration time reduction of a machine with a large inertia, such as fan, and operation of lift, etc. Build in break chopper

5. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Safety stop function (available soon) Safety stop function (available soon) The FR-D700 series conform to the safety standards to be compliant to the EU Machinery Directive. Highly reliable immediate output shutoff is performed with the build in HW. The inverter support space and time saving installation, which is very cost effective.

6. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER (2) Spring clamp terminal (control circuit terminal) High reliable wiring and easy wiring are realized with spring clamp terminal.* * :Main circuit terminal is screw terminal. Easy wiring Wiring is completed only by inserting wires treated with bar terminal (max, diameter 1.5mm) Capable of wiring without a bar terminal.

7. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER High reliability Spring structure in terminal contact section inside prevents contact fault due to vibration. Maintenance is unnecessary Screw retightening is unnecessary. Spring clamp terminal (control circuit terminal)

8. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER New functions and useful functions from superior models support all sorts of applications. (3) Enhanced function Regeneration avoidance function For a pressing machine and fan rotated faster than the set speed due to the effect of another fan, a trip can be made less likely to occur by automatically increasing frequency at regeneration.

9. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Optimum excitation control This control enables the motor efficiency to its optimum. More energy saving is possible in applications with variable load torque characteristic such as fan and pump.

10. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Power failure-time deceleration-to-stop function The motor can be decelerated to a stop when a power failure occurred to prevent the motor running. For fail-safe of machine tool, etc., it is effective to stop the motor when a power failure has occurred.

11. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Dancer control Entering position detection signal of dancer roll to use PID control enables tension control by dancer roll. Traverse function Traverse function for wind-up drum of spinning machine and wiredrawing machine prevents unevenness and deformation at thread winding.

12. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Most advanced life check Degrees of deterioration of main circuit capacitor, control circuit capacitor, and inrush current limit circuit can be monitored. Trouble can be avoided with the self-diagnostic alarm* 4 that is output when the life span is near. * 4 : If any one of main circuit capacitor, control circuit capacitor, inrush current restriction circuit or cooling fan reaches the output level, an alarm is output. Capacity of the main circuit capacitor can be measured by setting parameter at a stop and turning the power from off to on. Measuring the capacity enables alarm to be output. The cooling fan outputs alarm by using fan speed detection. Password function Registering 4-digit password can limit parameter read/write. It is effective for parameter setting protection. If Code is lost, you can reset to factory setting

13. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Quick setup with the setting dial Mitsubishi inverter has a setting dial of course. The scrolling speed of the dial was made to variable for more improved operability. The non-slip setting dial is easier to turn.

14. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Enhanced communication function Modbus and Mitsubishi inverter protocol Supports Modbus RTU Communication speed of RS-485 has been improved (communication at 38.4kbps is available) "Multi command mode" has been added to Mitsubishi inverter protocol (data processing time of the inverter has been reduced to 1/4) Password function Registering 4-digit password can limit parameter read/write. It is effective for parameter setting protection. If Code is lost, you can reset to factory setting

15. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Setting is easily done from a personal computer using the FR Configurator (option) (available soon) Connecting a personal computer and the inverter via RS-485 communication realizes setting with wizard (interactive) function of the FR Configurator (inverter setup software). In addition, a parameter setting can be converted from the FRS500 series to the FR-D700 series by "convert" function.

16. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Enclosure surface operation panel FR-PA07 (option) Optional enclosure surface operation panel (FR-PA07) can be connected. In addition, an operation panel for the FR-E500 series can be connected. The operation panel of the inverter can not be removed. A parameter unit connection cable (FR-CB20  ) is separately necessary. Parameter unit FR-PU07 (option) An optional parameter unit (FR-PU07) can be connected as well. A parameter unit connection cable (FR-CB20  ) is separately necessary. Setting such as direct input method with a numeric keypad, operation status indication, and help function are usable. Eight languages can be displayed. Parameter setting values of maximum of three inverters can be stored. A battery pack type (FR-PU07BB) allows parameter setting and parameter copy without powering on the inverter.

17. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Easily replaceable compact body Installation size is the same as that of the FR-S500 series which is the smallest model of the Mitsubishi inverter. Side by side installation saves space Space can be saved by side by side no clearance installation*. *: Use the inverter at the ambient temperature of 40°C or less.

18. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Easy replacement of cooling fan A cooling fan is provided on top of the inverter of all capacities requiring a cooling fan (1.5K to 7.5K). A cooling fan can be easily replaced without disconnecting main circuit wires. Combed shaped wiring cover Since a cover can be fitted after wiring, wiring work is easily done.

19. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Long-life design The life of cooling fan has been extended to 10 years * 1 of design life. The life of the cooling fan is further extended with ON/OFF control of the cooling fan. Longevity of capacitor was achieved with the adoption of a design life of 10 years * 1, * 2. *1 : Ambient temperature : annual average 40  C (free from corrosive gas, flammable gas, oil mist, dust and dirt) Since the design life is a calculated value, it is not a guaranteed value. *2 : Output current : 80% of the inverter rated current ComponentsGuideline of the FR-D700 Life Guideline of JEMA *3 Cooling fan10 years2 to 3 years Main circuit smoothing capacitor10 years5 years Printed board smoothing capacitor 10 years5 years Life indication of life components *3 : Excerpts from “Periodic check of the transistorized inverter” of JEMA (Japan Electrical Manufacturer’s Association)

20. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER (1) RoHS Directive compliant Human and environment-friendly inverter in compliant with RoHS Directive. (2) EMC filter integrated model EMC filter integrated models (to be released in 2009) which conform to the EMI level category 3 are line upped. (3) Complies with UL, cUL,EN (LVD) standards

21. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Easy operation integrated interface with M-dial. D700 S500 Auto tuning E500 R1 tuning ○ × PWM frequency automatic switchover F search function Energy saving Optimum magnetic flux control Modbus-RTU Power failure stop Remote I/O Regeneration avoidance Password function Dancer function Vector control General purpose flux vector control General purpose flux vector control Automatic torque boost Shortest acc/dec mode Acc/dec time increments User group ○ ○ ○ ○ ○ ○ ○ × × × × △ (200V only) × × × × × × × × × × × × × × × × × × × ○ ○ ○

22. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER E740 / E540 S540D740 E7E5 0.4k140x150x114116108x128x129.5 0.75k140x150x114116108x128x129.5 1.5k140x150x135136108x128x135.5 2.2k140x150x135136108x128x155.5 3.7k140x150x135136108x128x165.5 5.5k220x150x147148 220x150x155 7.5k220x150x147148 220x150x155 11k220x260x190 15k220x260x190 Dimensions (W x H x D) When communication option is mounted depth is 15mm greater. -> means different from E540. Dimension comparison 3~400V

23. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Dimension comparison 1~200V E720SE520SS520SD720S 0.1k68x128x80.5 0.2k68x128x80.5 0.4k68x128x142.5140x150x13668x128x142.5 0.75k108x128x135.5140x150x13668x128x162.5 1.5k140x150x155.5140x150x156108x128x155.5 2.2k140x150x155.5140x150x156 140x150x155.5 Dimensions (W x H x D) When communication option is mounted depth is 15mm greater. -> means different from E520.

24. Mitsubishi Electric – Inverter Update Feb 08 INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER /// INVERTER Ideal for many applications Speed Temperatur Flow  Fan & Pump  Transportation systems  Machines in the Pharmaceutical Industry  Printing machines  Washing machines  Extruder  Centrifuge  Automatic Doors  Mixer Applikation Example