1. Integration of Hydronic Thermal Transport Systems with Fire Suppression Systems ASHRAE Winter Meeting 2001 WALTER M. JANUS, PE URS Corp., Washington, DC

2. INTRODUCTION Air-Water Systems Have a Higher First Cost Than All- Air Systems Integration Techniques Can Reduce First Cost “Penalty” Combining Hydronic Distribution and Fire Suppression Systems - Examples Codes & Standards Design Considerations Installation Cost

3. CODES & STANDARDS - NFPA 13 Primary Duty is Fire Protection All Components Rated for Working Pressure of Sprinkler System (175 or 300 psi) Water for Fire Suppression Cannot Pass Through Auxiliary Equipment Must be a Closed Circulating System Dielectric Fittings Required at All Joints of Dissimilar Metals

4. CODES & STANDARDS - NFPA 13 Water Temperature Less Than 120°F/49 °C Service Valves Required at all Connections to Auxiliary Equipment Special Signage at Valves No Additives in Water That Would Inhibit its Fire- Fighting Capabilities Operation of Auxiliary Equipment Cannot Induce False Alarms or Inhibit Alarms

5. OTHER DESIGN CONSIDERATIONS Review with Code Officials Early and Often Basic Layout Coordination Between Design Disciplines Coordination Between Contractors Sprinkler Annunciation

6. FIRST COST IMPLICATIONS Example Building –Washington DC –Six Stories, 10,800 sq. ft. (100 m 2 ) each –Chilled Water Hydronic System –Sprinkler System Design for Light Hazard Cost Comparison –Includes Risers and Branch Piping Only Results –Stand Alone Sprinkler System$44,500($0.69/sq. ft.) –Stand Alone Hydronic System$47,000 ($0.73/sq. ft.) –Integrated System$50,800 ($0.78/sq. ft.)

7. CONCLUSIONS Combining Hydronic Distribution and Fire Suppression Systems Is Technically Feasible and Has Been Done Codes & Standards Make Provisions for It Applying This Integration to Air-Water Systems Can Reduce Their First Cost “Penalty”