2. Figure 1: The GT-1000 Solar PV Technology Panel

3. Identify and inventory the components that make up the GT-1000 Solar Photovoltaic Installer training system at this point.
Solar Panels (2)
DC Ammeters (2)
AC Ammeters (6)
Fuse Holders and Fuses (2)
Disconnect Switches (2)
30 Amp/50 Amp Breakers (2)
Load Diverter/Regulator
(continued)

4. Identify and inventory the components that make up the GT-1000 Solar Photovoltaic Installer training system at this point. (continued)
Grid Tie Inverter
Two-Row Electrical Connection Blocks (5)
Diverter Load Light (Red Light)
Load Lights (2)
Master AC Power Switch
120 VAC Outlet
120 VAC On/Off Switches (2)

5. Figure 2: The Back of the GT-1000 Panel

6. Figure 3: Non-Mounted GT-1000 Solar PV Technology Panel Components

7. Identify and inventory the following non-mounted components
Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time:
Photovoltaic Mounting Post
12V, 50W Photovoltaic Panels (2)
Horizontal Support Rails (2)
Mounting Clamps (2)
12V Rechargeable Batteries (4)
Protective Battery Case with Cover
Hand Held Digital Multimeter
(continued)

8. Identify and inventory the following non-mounted components
Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time: (continued)
Variable Intensity Light Source
12V Rechargeable Batteries (4)
Wire (Black 18 AWG)
Wire (Red 18 AWG)
Wire (Black 12 AWG)
Wire (Red 12 AWG)
12 and 18 AWG Crimp-on Fork Lug Connectors
(continued)

9. Identify and inventory the following non-mounted components
Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time: (continued)
Universal Side Mount Kit
Hose Clamps (2)
Bucket Mounting Piece
Left and Right Vertical Support Rails
Left and Right Mounting Clips