1. AHK Business trip – Energy efficiency

2. Energy efficiency Energy-efficient domestic appliance
Energy-efficient buildings
Renewable energies
Green IT
Energy-efficient locomotion
AHK Business Trip – Energy efficieny

3. ADDINOL Lube Oil GmbH 1936: foundation as „Mineralölwerk Lützkendorf“
1945: complete destruction during second World War
1960: construction of a new refinery
1970: monopolist in the territory of the former GDR
1976: development & production of HC synthetic oil
1990: internationalisation; now: ADDINOL (additives in oil)
1997: closing of the refinery
1998: privatisation
2000: restart in Leuna – outsourcing of the production
2007: complete production back in Leuna
AHK Business Trip – Energy efficieny

4. ADDINOL Lube Oil GmbH German Quality all over the word
Belgium Bulgaria Bahrain Bolivia
France Georgia Ghana Greece Hong Kong Hungary India
Montenegro Netherlands Oman Peru Pak
Turkey Taiwan Ukraine Uzbekistan Vietnam Romania Russia
AHK Business Trip – Energy efficieny

5. ADDINOL Lube Oil GmbH
Targets in the development of ADDINOL lubricants:
optimisation of resource use
reduction of energy consumption
minimisation of maintenance costs
AHK Business Trip – Energy efficieny

6. Energy-efficient lubricants
ADDINOL HV Eco Fluid
AHK Business Trip – Energy efficieny

7. reduction of oil temperature longer oil operating time
ADDINOL HV Eco Fluid
mineral based high-performance hydraulic fluids
ISO VG 32, 46, 68  VI > 170
latest additive technology for saving energy with
simultaneous increases in productivity
energy saving +
reduction of oil temperature
longer oil operating time
AHK Business Trip – Energy efficieny

8. ADDINOL HV Eco Fluid
AHK Business Trip – Energy efficieny

9. Performance improvement for VI 170
ADDINOL HV Eco Fluid
Performance advantages by the application of HV Eco (VI 170)
Compared to hydraulic oil with a VI of 159 and a VI of 105
Performance improvement for VI 170
compared to VI 150
compared to VI 105
Fuel use per cycle (liter)
Productivity buckets per liter fuel
Productivity buckets per cycle
Grading
-2.80 %
3.10 %
0.00 %
-5.40 %
5.70 %
Idling
-2.70 %
Traveling (meter)
-0.80 %
1.30 %
0.50 %
8.50 %
7.60 %
Active digging
0.90 %
7.20 %
8.10 %
2.50 %
32.50 %
35.80 %
Cycle duration: 20 minutes for productivity test
Travel cycle: efficiency measurement in meter/liter or meter/time
AHK Business Trip – Energy efficieny

10. ADDINOL HV Eco Fluid
Performance advantages by the application of HV Eco (VI 170) compared to standard ISO 46 HM or 10W fluids
5-10% more hydraulic power under full load conditions
5-10% higher flow rate at peak temperatures
5-10% faster response for improved productivity
5-7% energy saving
5-10% less fuel consumption to realise the same amount of work
AHK Business Trip – Energy efficieny

11. Energy-efficient lubricants
ADDINOL Eco Gear M und S
AHK Business Trip – Energy efficieny

12. ADDINOL Eco Gear M und S
high-performance gear oils with Surftec®, the unique additive combination
active effect wear protection
re-smoothing of damaged gear teeth by wear
increase of the efficiency of gears
reduction of oil temperature
significantly lower friction coefficient com-
pared with standard CLP oils
AHK Business Trip – Energy efficieny

13. Sewage treatment plants
ADDINOL Eco Gear M und S
Mining
Wind power
Bucket excavator
Sewage treatment plants
Shipping
Steel industry
AHK Business Trip – Energy efficieny

14. average gear coefficient of friction µmZ [-] peripheral speed vt [m/s]
ADDINOL Eco Gear M und S
Influence of friction and lube film thickness depending on the average gear friction coefficient acc. to FVA 345 at 60°C; 90°C and 1,350 N/mm²
average gear coefficient of friction µmZ [-]
peripheral speed vt [m/s]
AHK Business Trip – Energy efficieny

15. ADDINOL Eco Gear M und S Significant increase of the gear efficiency
Comparison of standard ADDINOL gear oil (ISO VG 320) with synthetic and mineral high-performance ADDINOL gear oil
Reduction of power loss during rated opertion / idle: with mineral high-performance oil 3% with synthetic high performance oil 5%
AHK Business Trip – Energy efficieny

16. Energy-efficient lubricants
ADDINOL Cliptec XHS 280
AHK Business Trip – Energy efficieny

17. Each application is different
ADDINOL Cliptec XHS 280
Each application is different
Operation conditions vary depending on the plastic material
low speed high speed
low temperature high temperature
Forces on the chains and guide rails vary by the different material
AHK Business Trip – Energy efficieny

18. ADDINOL Cliptec XHS 280
- chain lubricant based on carefully selected, fully synthetic components and efficient
additives
- designed especially for high-temperature applications up to +250 °C.
particularly developed for conveyor chains and clamps in film stretching lines
highly suited for the use in conveyor belts, chains and rolls in ovens and driers
preferred for chains operating in industries processing plastics and non-ferrous metals
AHK Business Trip – Energy efficieny

19. ADDINOL Cliptec XHS 280 and competitive product
Friction coefficient
Utilisation of driving power
Test on slide friction test rig – significant reduction of friction for ADDINOL Cliptec XHS 280 compared to competitive product
ADDINOL Cliptec XHS 280 and competitive product
compared. With ADDINOL Cliptec XHS 280 torque is reduced,as a consequence less energy input is required
AHK Business Trip – Energy efficieny

20. ADDINOL Cliptec XHS 280 3 - 5% less power consumption and wear
Performance advantages at application of ADDINOL Cliptec XHS 280
3 - 5% less power consumption and wear
8% lower friction
higher process speeds possible
more flexibility in sliding and
roller systems
reduced maintenance effort
AHK Business Trip – Energy efficieny

21. ADDINOL Lube Oil GmbH
Targets in the development of ADDINOL lubricants:
optimisation of resource use
reduction of energy consumption
minimisation of maintenance costs
AHK Business Trip – Energy efficieny

22. Thank you for your attention!