Presentation is loading. Please wait.

Presentation is loading. Please wait.

DENSITY Goal: To measure density using the proper units and equipment

Similar presentations


Presentation on theme: "DENSITY Goal: To measure density using the proper units and equipment"— Presentation transcript:

1 DENSITY Goal: To measure density using the proper units and equipment

2 What is density? Density is: The number of particles
packed into a space Formula: Density = Mass/Volume

3 How do you calculate density?
1. Mass of object (grams) 2. Volume of object (ml or cm3) 3. Mass divided by volume 4. Round to nearest tenth 5. Label answer (g/ml or g/cm3)

4 Density Example Density = Mass/Volume Example 1:
The mass of a block is 100 g. The volume of the block is 5 cm3. What is the block’s density?

5 ANSWER: M= 100g V= 5 cm3 D = m/v D= 100g / 5 cm3 D= 20.0 g/cm3

6 Example 2 The mass of a rock is 20.5 g. The volume of the rock is 41.0 ml. What is the rock’s density? M= 20.5 g V= 41.0 ml D= m/v = 20.5 g / 41.0 ml D= 0.5 g/ml

7 DENSITY When you find the density of an object, the number you calculate tells you whether the object will sink or float when placed in water. Density of water= 1 g/ml Less dense items float in water More dense items sink in water

8 So…………… Density > 1 g/ml, the object will sink
Density < 1 g/ml, the object will float Here’s an example A toy car with a mass of 20 g and a volume of 10 ml would have a density of what? Density = 20/10 = 2 g/ml Would this sink or float in water????????? SINK- Why? It’s density is greater than 1 g/ml.

9 Example A bar of soap has a mass of 15 g and a volume of 45 cm^3. Will it sink or float when placed in water? FLOAT- Why? It has a density of .3 g/cm^3, which is less than 1, the density of water

10 Which objects will sink or float?
HOLD UP SINK IF THE OBJECT WILL SINK, HOLD UP FLOAT IF THE OBJECT WILL FLOAT

11 What will sink or float in water?
Penny 1.3 g/ml Egg 0.9 g/ml Pencil 1.6 g/ml Iron 4.8 g/ml Pumice 0.7 g/ml Silver 3.2 gml Rock 1.1 g/ml

12 Density of liquids What will liquids with different densities do when poured into the same jar? They will layer according to density Liquids with higher densities will go to the bottom, liquids with lower densities will float to the top Look at the example on the front counter

13 Example on counter The jar contains the following:
Which layer is which then? Water = 1 g/ml Oil = 0.7 g/ml Syrup = 3.2 g/ml Liq. Soap = 2.5 g/ ml Draw a picture in your notes and label it with the correct name of each liquid

14 Which is which? Top = Oil 2nd = Water 3rd = Soap Bottom = Syrup

15 Example Please draw a picture of how the following liquids would layer out in a jar: Mercury = 5.6 g/ml Italian dressing = 0.7 g/ml Water = 1 g/ml Antifreeze = 1.4 g/ml Paint thinner = 0.3 g/ml

16 Answer: Top= PAINT THINNER ITALIAN DRESSING WATER ANTIFREEZE
Bottom =MERCURY

17 Is there a way to estimate density?
You can estimate density by putting the object in water If it sinks d > 1 g/ml If it floats d < 1 g/ml- see how much of the object is below the water

18 Remember: Density corresponds to the amount of the object below the water’s surface !
Look at the block on the front counter. What is it’s approximate density???

19 What would happen to the density of this block if I were to cut in in half?
How about if I cut it into six pieces? NOTHING WOULD HAPPEN TO ITS DENSITY!! Density of an object remains the same even when the object is cut into smaller pieces

20 An object’s density always remains the same !!!!
The density of copper is always 8.9 g/ml- no matter how big or small! The density of Nylon is always 1.13 g/ml- no matter how big or small ! Density can help identify what a material is made of !!!

21 Last Example A cube has a mass of 14.3 g and a volume of 5.3 ml. What is the cube made of? A. Copper 8.9 g/ml B. Acrylic g/ml C. Oak 0.7 g/ml D. Aluminum 2.7 g/ml


Download ppt "DENSITY Goal: To measure density using the proper units and equipment"

Similar presentations


Ads by Google