1. Batching, Mixing, Transporting, and Handling Concrete
EB001 –Design and Control of Concrete Mixtures—14th Edition, 2002, Chapter 10, pages 179 to 190

2. Ordering Ready Mixed Concrete
ASTM C 94
Specify:
Coarse aggregate size
Slump
Air content
Basis for proportioning, select Options A ,B, or C.

3. Ordering Ready Mixed Concrete
ASTM C 94
Option A—performance based:
Purchaser specifies:
Compressive strength
Concrete producer selects mix proportions.

4. Ordering Ready Mixed Concrete
ASTM C 94
Option B—prescription based:
Purchaser specifies mixture proportions including:
Cement content
Water content
Admixture type and content

5. Ordering Ready Mixed Concrete
ASTM C 94
Option C—mixed option:
Purchaser specifies:
Compressive strength
Cement content
Admixture type and content
Concrete producer selects mix proportions.

6. Batching
Fig Control room for batching equipment in a typical ready mixed concrete plant. (69894)

7. Stationary Mixing Stationary Mixers Mixer Types ― up to 9m3
Onsite or Central Mix R/M plant
Used for complete or shrink mixing
Mixer Types ― up to 9m3
Tilting or non-tilting drum
Open top revolving blade or paddle
Typical complete mixing times
Minimum of 1 min. for up to 1 yd3 or less mixer capacity plus 15 sec. for each additional yd3 or fraction thereof
Fig Concrete can be mixed at the jobsite in a stationary mixer. (58642)

8. Ready Mixed Concrete Shrink-mixed concrete Truck-mixed concrete
mixed partially in a stationary mixer and completed in a truck mixer
Truck-mixed concrete
mixed completely in a truck mixer
Fig Truck-mixed concrete is mixed completely in a truck mixer. (1153)

9. Ready Mixed Concrete Central-mixed concrete
mixed completely in a stationary mixer
delivered in
a truck agitator
a truck mixer operating at agitating speed
a nonagitating truck
Fig Central mixing in a stationary mixer of the tilting drum type with delivery by a truck mixer operating at agitating speed. (69926)

10. Ready Mix Plant
Fig Schematic of a ready mix plant.

11. Truck Mixed Concrete ASTM C 94
70 to 100 revolutions required for mixing,
mixing speed = 6 to 18 rpm
After mixing, drum revolves at agitating speed, 2 to 6 rpm
Discharge before exceeding 300 drum revolutions
Discharge before 1½ hours

12. Mobile Batcher Mixer
Used for: Intermittent production of concrete at jobsite, or small quantities.
Advantages: Combined materials transporter and batching and mixing system. One-man operation.
Watch for: Good preventive maintenance program. Materials must be identical to those in original mix design.
Fig Mobile batcher measures materials by volume and continuously mixes concrete as the dry ingredients, water, and admixtures are fed into a mixing trough at the rear of the vehicle. (54087)

13. Nonagitating Truck
Used for: Transport concrete on short hauls over smooth roadways.
Advantages: Cost of nonagitating equipment is lower than that of truck agitators or mixers.
Watch for: Slump should be limited. Possibility of segregation. Height upon discharge is needed.
Fig Nonagitating trucks are used with central-mix batch plants where short hauls and quick concrete discharge allows the rapid placement of large volumes of concrete. (69897)

14. Agitator Trucks
Used for: Transporting concrete for all uses. Haul distances must allow discharge of concrete within 1½ hours.
Advantages: Operate usually from central mixing plants.
Watch for: Timing of deliveries should suit job organization. Concrete crew and equipment must be ready onsite to handle concrete.
Fig Truck agitators are also used with central-mix batch plants. Agitation mixing capabilities allow truck agitators to supply concrete to projects with slow rates of concrete placement and at distances greater than nonagitating trucks. (69898)

15. Remixing Concrete (1) ASTM C 94 (AASHTO M 157)
Water may be added at jobsite provided:
Spec. w/c-ratio is not exceeded
Measured slump less than specified
Allowable mixing and agitating time (or drum revolutions) are not exceeded
Concrete is remixed
min. 30 rev. at mixing speed
until uniformity is within limits
Indiscriminate addition of water to make concrete more fluid lowers the quality of the concrete.

16. Transporting and Handling
Wheelbarrows and Buggies
Used for: Short flat hauls on all types of onsite concrete construction.
Advantages: Versatile—ideal inside and on jobsites with changing placing conditions.
Watch for: Slow and labor intensive.
Fig Versatile power buggy can move all types of concrete over short distances. (54088)

17. Transporting and Handling
Belt conveyor
Used for: Conveying concrete horizontally or higher/lower level.
Advantages: Adjustable reach, traveling diverter, variable speed.
Watch for: End-discharge arrangements needed to prevent segregation and mortar on return belt. Belt cover needed in hot and windy weather.
Fig The conveyor belt is an efficient, portable method of handling concrete. A dropchute prevents concrete from segregating as it leaves the belt; a scraper prevents loss of mortar. Conveyor belts can be operated in series and on extendable booms of hydraulic cranes. (69896)

18. Truck mounted conveyors
Transporting and Handling
Truck mounted conveyors
Used for: Conveying concrete horizontally or higher/lower level.
Advantages: Conveyer arrives with concrete. Adjustable reach and variable speed.
Watch for: End-discharge arrangements needed to prevent segregation and mortar on return belt. Belt cover needed in hot and windy weather.
Fig A conveyor belt mounted on a truck mixer places concrete up to about 12 meters (40 feet) without the need for additional handling equipment. (53852)

19. Transporting and Handling
Buckets
Used with: Cranes, cableways, and helicopters.
Advantages: Enables full versatility of cranes, cableways, and helicopters to be exploited. Clean discharge.
Watch for: Select bucket capacity to conform to size of the concrete batch and capacity of placing equipment.
Fig Concrete is easily lifted to its final location by bucket and crane. (69687)

20. Transporting and Handling
Fig Ready mixed concrete can often be placed in its final location by direct chute discharge from a truck mixer. (54955)
Fig In comparison to conventional rear-discharge trucks, front-discharge truck mixers provide the driver with more mobility and control for direct discharge into place. (70006)
Rear Discharge
Front Discharge

21. Transporting and Handling
Cranes and Buckets
Used for: Work above ground level.
Advantages: Can handle concrete, reinforcing steel, formwork, and sundry items.
Watch for: Has only one hook. Careful scheduling between trades and operations is needed to keep crane busy
Fig The tower crane and bucket can easily handle concrete for tall-building construction. (69969)

22. Transporting and Handling
Pumps
Used for: Conveying concrete from central discharge point to formwork.
Advantages: Pipelines take up little space and can be readily extended. Delivers concrete in continuous stream. Pump can move.
Watch for: Constant supply of freshly-mixed concrete is needed without any tendency to segregate.
Fig A truck-mounted pump and boom can conveniently move concrete vertically or horizontally to the desired location. (69968)

23. Flexible Hose at End of Pump’s Rigid Pipeline
Transporting and Handling
Flexible Hose at End of Pump’s Rigid Pipeline
Fig View of concrete discharging from flexible hose connected to rigid pipeline leading from the pump. Rigid pipe is used in pump booms and in pipelines to move concrete over relatively long distances. Up to 8 m (25 ft) of flexible hose may be attached to the end of a rigid line to increase placement mobility. (69966)

24. Transporting and Handling
Screw Spreaders
Used for: Spreading concrete over large flat areas.
Advantages: Concrete can be quickly spread over a wide area to a uniform depth.
Watch for: They are normally used as part of a paving train. They should be used for spreading before vibration is applied.
Fig The screw spreader quickly spreads concrete over a wide area to a uniform depth. Screw spreaders are used primarily in pavement construction. (69895)

25. Work Above Ground Level
Transporting and Handling
Fig For work aboveground or at inaccessible sites, a concrete bucket can be lifted by helicopter. (Source: Paschel)
Fig A pump boom mounted on a mast and located near the center of a structure can frequently reach all points of placement. It is especially applicable to tall buildings where tower cranes cannot be tied up with placing concrete. Concrete is supplied to the boom through a pipeline from a ground-level pump. Concrete can be pumped hundreds of meters (feet) vertically with these pumping methods. (49935)
Work Above Ground Level

26. Videos 1/3
Batching
Stationary Mixers

27. Videos 2/3
Truck Mixer Types
Nonagitating Mixers

28. Videos 3/3
Agitators