1. ORGANIC CHEMISTRY CHM 207 CHAPTER 5: ALKYL HALIDES NOR AKMALAZURA JANI

2. SUBTOPICS Nomenclature and structures of alkyl halides. Classification of alkyl halides. Physical properties of alkyl halides. Reaction of alkyl halides. 1) Formation of alkanes (Wurtz reaction) 2)Nucleophilic substitution reaction: i) Example: formation of alcohol, Williamson ether synthesis, amine synthesis, nitrile synthesis ii) Mechanism of nucleophilic substitution reactions. iii)Types of nucleophilic substitution reaction: SN 1 and SN 2 reaction.

3. 3) Elimination reaction (dehydrohalogenation of alkyl halides). - E 1 and E 2 reactions. Uses of alkyl halides.

4. ALKYL HALIDES General formula: C n H 2n+1 X where n = 1,2,… and X (halogen) Functional group: halogen, -X (X = F, Cl, Br, I) Naming alkyl halides: - same as nomenclature of alkanes

5. Classification of alkyl halides

6. PHYSICAL PROPERTIES BOILING POINTS - molecules with higher molecular weight have higher boiling points. - reasons: the molecule is heavier, slower moving, have greater surface area, have larger London attractions, resulting higher boiling points. - example: CH 3 FCH 3 ClCH 3 BrCH 3 I RMM 34 50.5 95 142 bp (°C) -78 -24 4 42

7. - compounds with branched have more spherical shapes, have smaller surface area, resulting lower boiling points. - alkyl halides with more carbon atoms have higher boiling points.

8. DENSITIES - alkyl fluoride and alkyl chlorides (with one Cl atom) are less dense than water. - alkyl chloride with two or more chlorine atoms are denser than water. - all alkyl bromides and alkyl iodides are denser than water.

9. REACTIONS OF ALKYL HALIDES

10. Formation of alkanes (Wurtz reaction) Equation: 2R-X + 2Na → 2NaX + R-R Example: 2CH 3 I + 2Na CH 3 -CH 3 + 2NaI Most suitable for preparation of higher alkanes containing an even number of carbon atoms. dry ether reflux

11. Alkanes containing an odd number of carbon atoms can be prepared by using a mixture of two different alkyl halides. This reaction produces only low yields due to the formation of other alkanes as by- products. CH 3 I + 2Na + CH 3 CH 2 I CH 3 CH 2 CH 3 + 2NaI + CH 3 CH 2 -CH 2 CH 3 + CH 3 CH 3 dry ether by-products

12. Reactions of alkyl halides Two types of reactions: i) substitution reactions ii) elimination reactions

13. NUCLEOPHILIC SUBSTITUTION REACTIONS

16. Mechanism of nucleophilic substitution reactions δ-δ- δ-δ- δ+δ+ δ+δ+

17. Type of nucleophilic substitution reactions : S N 1 and S N 2 reactions S = substitution N = nucleophilic 1 = a first order (unimolecular) reaction 2 = a second order (bimolecular) reaction

18. S N 1 (Substitution, Nucleophilic, unimolecular) reactions Unimolecular : only one molecule involved in the transition state of the rate-limiting step. Example: the reaction between aqueous NaOH and tertiary alkyl halides.

19. The reaction is first order and the rate depends only on the concentration of the tertiary alkyl halides. Rate = k[(CH 3 ) 3 CBr] The concentration of OH - does not have any effect on the rate of reaction. OH - does not involved in the rate-limiting step.

20. Carbocation rearrangement in S N 1 reactions Rearrangement of the carbon skeleton will take place if a more stable carbocation can be formed in the process. For example, hydrolysis of the secondary alkyl bromide, 2- bromo-3-methylbutane, yields the tertiary alcohol, 2-methyl-2- butanol.

21. Reactivity towards S N 1 substitution mechanisms follows the stability of carbocations: S N 1 reactivity: 3 o > 2 o > 1 o > CH 3 X inversionretention

22. S N 2 (Substitution, Nucleophilic, bimolecular) reactions The processes of bond breaking and bond forming occur simultaneously (one bond is forming, one bond is breaking). The mechanism involves only one step. For example, hydrolysis of iodomethane (primary alkyl halides) δ-δ- δ+δ+ δ+δ+δ-δ-δ-δ-

23. A second order reaction Rate equation = k[CH 3 I][OH - ] Both iodomethane and the OH - are involved in the rate-limiting step. S N 2 reactivity: CH 3 X > 1 o > 2 o > neopentyl > 3 o Factor that determines the order of reactivity in S N 2 reactions is the steric effect. A steric effect is one in which the rate of chemical reaction depends on the size or spatial arrangement of the groups attached to, or near to, the reaction site of the molecule. or

24. Relative reactivities of primary, secondary, and tertiary alkyl halides The reactivity of alkyl halides towards nucleophilic substitution depend on the halogen. The rate of reaction decrease in the order R-I > R-Br > R-Cl > R-F (most reactive) (least reactive) Reason: C-X bond become stronger from I to F

25. Comparison S N 1 and S N 2 reactions SN1SN1SN2SN2 Rate of reactionFirst orderSecond order StereochemistryRacemic mixture (mixture of inversion and retention) Complete inversion ReactivityBenzyl > allyl > ~ 3 o > 2 o > 1 o CH 3 X > 1 o > 2 o > 3 o NucleophilesWeak nucleophilesStrong nucleophiles

26. Elimination reactions- dehydrohalogenation of alkyl halides Elimination: loss of two atoms or groups from the substrate to form a pi bonds. Dehydrohalogenation (removal of hydrogen and a halogen atom) of alkyl halide to form alkene.

27. The elimination reaction is occurred when the reaction used strong base for examples, t-butoxide ion ((CH 3 ) 3 CO - ) or OH - ion and heated at high temperature. Dehydrohalogenation will yield an alkene that has the larger number of alkyl groups as the main product (Saytzeff’s rule). Elimination reactions can be divided into two: i) E1 reaction ii) E2 reaction

28. E1(Elimination, unimolecular) reaction The rate-limiting state involves a single molecular than a collision between two molecules. A first order reaction. Rate equation: k[RX] E1 reactivity: Benzyl > allyl > 3 o > 2 o > 1 o

30. E2(Elimination, bimolecular) reaction A second order reaction. Rate equation: k[RX][Base] E2 reactivity: 3 o > 2 o > 1 o Mechanism:

31. Comparison E1 and E2 reactions E1E2 Rate of reactionFirst orderSecond order Reactivity3 o > 2 o > 1 o BaseDo not need strong base Strong base

32. Alkyl halidesReactions 1O1O RCH 2 XRCH 2 Nu Nu - SN2SN2 R 2 CHX R 2 CHNu + alkene alkene Nu - strong S N 2 + E2 E2 B - (strong) 2O2O R 3 CX R 3 CNu + alkene alkene Nu - (weak) S N 1 + E1 E2 B - (strong) 3O3O

33. SOME COMMON NUCLEOPHILES

34. USES OF ALKYL HALIDES Solvents - industrial and household solvents. - carbon tetrachloride (CCl 4 ) used for dry cleaning, spot removing. - methylene chloride (CH 2 Cl 2 ) is used to dissolve the caffeine from coffee beans to produce decaffeinated coffee. Reagents - as starting materials for making complex molecules. - for example, the conversion of alkyl halides to organometallic reagents (compounds containing carbon- metal bonds) is important tool for organic synthesis.

35. Anesthetics - examples: chloroform (CHCl 3 ) and ethyl chloride. Freons: Refrigerants and foaming agents - Freons (called chlorofluorocarbons, or CFCs) is used as a refrigerant gas. Pesticides - example: DDT (Dichloro Diphenyl- Trichloroethane) is used as insecticides.