1. November, 2014 SUPER STAN SERIES OF HIGH PERFORMANCE M&R WELDING ELECTRODES “ World Class Products ’’

2. “SUPER STAN” SERIES Product Features & Benefits

3. ALUMINIUM : JOINING PRODUCTS

4. SUPER STANALLOY AL 11 For all weldable Aluminium & its alloys Versatility, Low Inventory and Ease of selection All Positional welding alloy Ease of M & R Applications. Component setting time reduction Rapid deposition Faster Job completion Rapid solidification Makes In situ welding possible Over head applications with ease Hermitically Sealed packs No moisture Pickup Higher Shelf Life- No flux Pitting TS- 34000 psi Higher Safety margin Product FeatureUser Benefit

5. COPPER : JOINING PRODUCTS

6. SUPER STANALLOY CU 12 Can be used for overlaying on steels, CI, Bronze Versatility, Low Inventory and Ease of selection Excellent colour match to Bronze Aesthetics Excellent Arc Stability Welder Comfort High arc time Porosity free and dense welds Minimal Rework Defect Free Welding Good machinability & Corrosion Resistance No High Spots Corrosion resistance as that of Bronze TS- 45000 psi Higher Safety margin Product FeatureUser Benefit

7. SUPER STANALLOY CU 14 Can be used for overlaying on steels, CI, Bronze Versatility, Low Inventory and Ease of selection Excellent colour match to Bronze Aesthetics Can be used in temperature range of -196 to 450 degree Wide temperature Range High Temperature properties Excellent Arc Stability, Porosity free and dense welds Welder Comfort, Minimal Rework Defect Free Welding Excellent Corrosion Resistance Best for High temperature corrosion TS- 70000 psi Higher Safety margin Product FeatureUser Benefit

8. STEELS : JOINING PRODUCTS

9. SUPER STANALLOY ST 21 Can be used for all Low carbon and Low Alloy Steels Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ Self Lifting Slag Lower Welders Fatique No Slag inclusion All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Finely Ripped Bead Good Bead appearance Minimal Finishing operations required TS- 72000 psi Higher Safety margin Product FeatureUser Benefit

10. SUPER STANALLOY ST 22 Can be used for all Low/ Med carbon and Low/ Med Alloy Steels Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ Extra Low Diffusable Hydrogen level No Hydrogen Induced cracks No delayed Cracking All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Resistance to Surface Contaminant Best suited for Cast steel applications Can perform at Subzero Temperature Can be used for cryogenic Application Product FeatureUser Benefit X Ray Quality Weld & Self Lifting Slag Design Zero Weld Defects. TS- 88000 psi Higher Safety margin

11. SUPER STANALLOY ST 23 Can be used for all Low/ Med carbon and Low/ Med Alloy Steels Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ Extra Low Diffusable Hydrogen level No Hydrogen Induced cracks No delayed Cracking All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Resistance to Surface Contaminant Best suited for Cast steel applications Can perform at Subzero Temperature Can be used for cryogenic Application Product FeatureUser Benefit X Ray Quality Weld & Self Lifting Slag Design Zero Weld Defects. TS- 82000 psi Higher Safety margin

12. SUPER STANALLOY DS 31 Can be used for Dissimilar and unknown Compositions Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ Perfect Chemistry with Max Strength and Ferrite Balance Ideal of joining Wide varieties No cracks when used in high alloys All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Resistance to Surface Contaminant Best suited for Contaminated surfaces. Minimal Surface Preparation time. Product FeatureUser Benefit Deposits exhibit low coeff of friction Suited for bearing surfaces. TS- 120000 psi Higher Safety margin alloy

13. SUPER STANALLOY DS 32 Can be used for Dissimilar and unknown Stainless Steels Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ Deposits withstand till 1000 Deg C Resistance to Corrosion at High Temp Retention of Strength at High Temp. All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Smooth Arc Transfer Welders Comfort Lower post welding time required. Product FeatureUser Benefit No red Hotness while welding Uniform Chemistry of the weld bead No electrode wastage TS- 87000 psi Higher Safety margin alloy

14. SUPER STANALLOY DS 33 Can be used for Dissimilar and unknown Compositions Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ Perfect Chemistry with Max Strength and Ferrite Balance Ideal of joining Wide varieties No cracks when used in high alloys All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Resistance to Surface Contaminant Best suited for Contaminated surfaces. Minimal Surface Preparation time. Product FeatureUser Benefit Deposits exhibit low coeff of friction Suited for bearing surfaces. TS- 100000 psi Higher Safety margin alloy

15. SUPER STANALLOY DS 34 Can be used for Dissimilar and unknown Compositions Wide base metal compatibility, Versatility, Lower inventory Frosty Arc Formulations Minimum Arc gap-Low Heat Input Low HAZ Perfect Chemistry with Max Strength and Ferrite Balance Ideal of joining Wide varieties High Strength with good ducility No cracks when used in high alloys All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Small and Optimal Grain size Can take shock & dynamic Loads Usage on restrained joints Product FeatureUser Benefit Deposits exhibit low coeff of friction Suited for bearing surfaces. TS- 135000 psi Higher Safety margin alloy Tolerance to Impurities Can work on Contaminated surfaces Minimal Cleaning Required. No weld defects even on contaminated surfaces

16. SUPER STANALLOY TC 41 Can be used for Dissimilar and unknown Compositions Wide base metal compatibility, Versatility, Lower inventory Can be used at Elevated Temperatures Weld deposits can be thermally cycled. Retains Phy. Properties at High temp Good Ductility & tough Deposits No HAZ Cracks No PWHT required for most applns. All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Minimal Shrinkage Stresses on Cooling Can be used on thicker sections Minimal Residual stresses after welding. Product FeatureUser Benefit Deposits doesn’t undergo PWHT No fear of HAZ cracks TS- 87000 psi Higher Safety margin alloy

17. SUPER STANALLOY TC 42 Can be used for Dissimilar and unknown Compositions Wide base metal compatibility, Versatility, Lower inventory Can be used at Elevated Temperatures Weld deposits can be thermally cycled. Retains Phy. Properties at High temp Good Ductility & tough Deposits No HAZ Cracks No PWHT required for most applns. All positional Welding Alloy with high metal recovery. Positional Welding Possible Minimal Waste of Time for positioning the job Minimal Shrinkage Stresses on Cooling Can be used on thicker sections Minimal Residual stresses after welding. Product FeatureUser Benefit Deposits doesn’t undergo PWHT No fear of HAZ cracks TS- 100000 psi Higher Safety margin alloy

18. SUPER STANALLOY EM 35 Best suited for Manganese Steels to Carbon Steels Can be widely used in all earth moving applications and wide base metal usage. Can be used at Elevated Temperatures Retains Phyical Properties at High temperatures. Good Elongation (40%) and Tough Deposits Suitable for Base layers during Buildups. High elongation hence no HAZ Cracks. All positional Welding Alloy with high metal recovery. Positional Welding Possible Minimal Waste of Time for positioning the job Multi layer build ups possible Can be used on thicker sections Build Ups possible Product FeatureUser Benefit TS- 100000 psi Higher Safety margin alloy

19. STAINLESS STEELS : JOINING

20. SUPER STANALLOY CN 51 Can be used for 304, 304L, 308, 308L & 347 Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ & No IGC/ Cr Depletion All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Smooth Arc Transfer Welders Comfort Lower post welding time required. Product FeatureUser Benefit No red Hotness while welding Uniform Chemistry of the weld bead No electrode wastage TS- 80000 psi Higher Safety margin alloy

21. SUPER STANALLOY CN 52 Can be used for SS 301/2/3/4/4L/5/6/8 & 347 Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ & No IGC/ Cr Depletion All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Deposits can take high Temperatures Stabilised SS deposits Excellent Creep Resistance Good Corrosion Resistance at High Temp. Product FeatureUser Benefit No red Hotness while welding Uniform Chemistry of the weld bead No electrode wastage TS- 80000 psi Higher Safety margin alloy

22. SUPER STANALLOY CN 53 Can be used for SS 316, 316 L, 315, 318, 329 Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ & No IGC/ Cr Depletion All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Nil Ferrite Deposits Best Suited for High level Corrosions For Fertiliser and Chemical Industry. Product FeatureUser Benefit No red Hotness while welding Uniform Chemistry of the weld bead No electrode wastage TS- 85000 psi Higher Safety margin alloy

23. SUPER STANALLOY CN 54 Can be used for all Unknown and Dissimilar SS. Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ & No IGC/ Cr Depletion All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Deposits can withstand temperatures till 1200 0 C. Excellent Creep Resistance Good Corrosion Resistance at High Temp. Product FeatureUser Benefit No red Hotness while welding Uniform Chemistry of the weld bead No electrode wastage Best suited for joining Carbon steel to Stainless steels Versatile in Operation TS- 84000 psi Higher Safety margin alloy

24. SUPER STANALLOY CN 55 Can be used on all Straight Chrome steels Wide base metal compatibility, Versatility, Lower inventory Contact Type Electrode Low Heat Input Low HAZ & No IGC/ Cr Depletion All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Deposits can withstand Pitting Corrosion Best suited for hydel applications Deposits are Touch and Hard to resist pitting. Product FeatureUser Benefit No red Hotness while welding Uniform Chemistry of the weld bead No electrode wastage TS- 120000 psi Higher Safety margin alloy Hardness : 34- 38 HRc Hard enough combined with Corrosion resistance to resist cavitation.

25. CAST IRON : JOINING PRODUCTS

26. SUPER STANALLOY FN 61 Can be used on all Cast Irons Wide base metal compatibility, Versatility, Lower inventory Very High resistance to Contaminated CI Minimal Cleaning required Resistance to Impurties Deposits have good Colour Match to Grey CI Aesthetics All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Spray Transfer and Fast Freezing Ideal for Usage on Contaminated Castirons Product FeatureUser Benefit Non Conductive flux Coating Welders Comfort No side arcing while welding TS- 60000 psi Higher Safety margin alloy

27. SUPER STANALLOY FN 62 Can be used on all weldable grades of Cast irons Wide base metal compatibility, Versatility, Lower inventory Innovative Core wire design Highest Penetrations in Cast Irons Good resistance to surface Contaminations Touch weldable Alloy- Frosty Arc formulation. Lowest Heat Input No HAZ cracks All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Deposits are Machinable Post welding machining is easy Product FeatureUser Benefit Highest penetrations Can be used for higher thickness. TS- 76000 psi Higher Safety margin alloy

28. SUPER STANALLOY FN 63 Can be used on all weldable grades of Cast irons Wide base metal compatibility, Versatility, Lower inventory Pure Nickel Electrode Can be Quench Welded No HAZ cracks Good Ductility Touch weldable Alloy- Frosty Arc Formulation. Lowest Heat Input No HAZ cracks All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Deposits are Highly Machinable Drilling & Tapping is Possible Product FeatureUser Benefit Optimum Penetrations Ideal for Thinner section Joining. TS- 65000 psi Higher Safety margin alloy

29. SUPER STANALLOY FN 64 Can be used on all weldable grades of Cast irons Wide base metal compatibility, Versatility, Lower inventory High Nickel Electrode ( E Ni Fe) No HAZ cracks Good Ductility Touch weldable Alloy Lowest Heat Input No HAZ cracks All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Deposits are Machinable Post Finishing operations are easy Product FeatureUser Benefit Optimum Penetrations Ideal for Thinner section Joining. TS- 65000 psi Higher Safety margin alloy Good Color March to Grey CI Better Aesthetics.

30. SUPER STANALLOY FN 65 Can be used on all weldable grades of Cast irons Wide base metal compatibility, Versatility, Lower inventory Perfect Blended Fe Ni Electrode No HAZ cracks Good Ductility Touch weldable Alloy & All Position Capability Lowest Heat Input- No HAZ Cracks Minimal time required for set up Deposits resists contaminations Can be used on a Contaminated Surfaces. Minimal Time for surface prepratation Deposits can be Machined Post Finishing operations are easy Product FeatureUser Benefit Good Penetration on CI Ideal for Thicker Sections Joining. Can with stand hydrostatic Pressures TS- 80000 psi Higher Safety margin alloy

31. SUPER STANALLOY FN 66 Can be used on all weldable grades of Cast irons Wide base metal compatibility, Versatility, Lower inventory Deposits are best suited for SG iron Can be used on Reactive Torque areas Good Ductility which makes it easy for Nodular CI usage Touch weldable Alloy Lowest Heat Input No HAZ cracks All positional Welding Alloy Positional Welding Possible Minimal Waste of Time for positioning the job Deposits are Machinable Post Finishing operations are easy Product FeatureUser Benefit Optimum Penetrations & best suited for Joining CI to Carbon Steel Ideal - Thinner & Thicker section Joining. Best suited for CI to Carbon Steels Joining TS- 70000 psi Higher Safety margin alloy Resistance to Contaminations Minimal surface Preparations

32. SUPER STANALLOY FN 67 Can be used on all weldable grades of Cast irons Wide base metal compatibility, Versatility, Lower inventory Perfect Blended Fe Ni Electrode No HAZ cracks Good Ductility Touch weldable Alloy & All Position Capability Lowest Heat Input- No HAZ Cracks Minimal time required for set up Deposits resists contaminations Can be used on a Contaminated Surfaces. Minimal Time for surface prepratation Deposits can be Machined Post Finishing operations are easy Product FeatureUser Benefit Good Penetration on CI Ideal for Thicker Sections Joining. Can with stand hydrostatic Pressures TS- 70000 psi Higher Safety margin alloy

33. HARDFACING

34. SUPER STANHARD FC 71 An iron Based Carbide Alloy Offers good Resistance to Abrasion related applications Deposits have a Tough Matrix Deposits can resist Moderate Impact Deposits doesn’t Spall under pressure Rapid Deposition alloy Faster Deposition of the alloy Minimal time requirement Multi Layer Deposits possible Build up is easily possible without the fear of cracking All position Electrode Minimal time required for set up Product FeatureUser Benefit Can be used on Cast steels, Mn Steels & malleable Iron Versatality, Wide application usage Hardness : 58- 60 HRc Resists Abrasion, pressure and moderate Impact

35. SUPER STANHARD FC 72 An iron Based build up alloy for Ferrous Base Metals Build up combined with Abrasion Resistance Deposits areTough with a good anchoring Matrix Deposits can resist High Impact Deposits doesn’t Spall under pressure Rapid Deposition alloy Faster Deposition of the alloy Minimal time requirement Multi Layer Deposits & Deposits are Machinable Build up is easily possible without the fear of cracking Machinability All position Electrode, Easy Slag Removal Minimal time required for set up Ease of Removing Slag Product FeatureUser Benefit Can be used on Cast steels, Mn Steels & malleable Iron Versatality, Wide application usage Hardness : 28-32HRc Resists Mild Abrasion, Heavy pressure and High Impact

36. SUPER STANHARD MN 73 Manganese Based Alloy Suitable for Hadfield Steels & Manganese Steel Base metals Tough Deposits & work Hardening In nature Deposits can resist High Impact Deposits doesn’t Spall under pressure Deposits Harden Layer by layer. Rapid Deposition alloy Faster Deposition of the alloy Minimal time requirement Multi Layer Deposits Build up is easily possible without the fear of cracking. All position Electrode, Easy Slag Removal Minimal time required for set up Ease of Removing Slag Product FeatureUser Benefit Nickel Fortified Alloy Can be used for Buildup’s & Hard surfacing also Hardness : 20HRc ( As deposited) : 45-50 Hrc ( Work hardened) Resists Mild Abrasion, Heavy pressure and High Impact

37. SUPER STANHARD FW 74 Manganese Based Alloy Suitable for Hadfield Steels & Manganese Steel Base metals Tough Deposits & Rapid work Hardening In nature Deposits can resist High Impact Deposits doesn’t Spall under pressure Deposits Harden Layer by layer. Rapid Deposition alloy Faster Deposition of the alloy Minimal time requirement Multi Layer Deposits with Inter granular pinning Build up is easily possible without the fear of cracking. Doesn’t Crack on the impact All position Electrode, Easy Slag Removal Minimal time required for set up Ease of Removing Slag Product FeatureUser Benefit Nickel Fortified Alloy Can be used for Buildup’s & Hard surfacing also Hardness: 20HRc ( As deposited) : 50 Hrc ( Work hardened) Resists Mild Abrasion, Heavy pressure and High Impact

38. SUPER STANHARD NA 75 Nickel Based Austenitic Alloy Suitable for Joining, Build up & Hard Surfacing. Deposits Exhibit high Tensile Strength High temperature properties Retains Tensile strength at High Temp. Has good Corrosion Resistance at High temperature also. Tough & dense Deposits Can be used on applications with high impact and temperature Deposits Doesn’t Gall Multi Layer Deposits Build up is easily possible without the fear of cracking. Doesn’t Crack on the impact All position Electrode, Easy Slag Removal Minimal time required for set up Ease of Removing Slag Product FeatureUser Benefit Deposits Have Low Coeff of Friction Can be used on Bearing areas. Hardness : 20HRc ( As deposited) : 50 Hrc ( Work hardened) Resists Mild Abrasion, Heavy pressure, High Impact Combined with Temp Tensile Strength: 1,20,000 Psi Good Safety Margin

39. SUPER STANHARD AC 76 Chromium Carbide Rich alloy in an Eutectic matrix Resists severe Abrasion hence higher Life. Alloy with minimal base metal Dilutions Maximum hardness in the first Layer itself. High Life in low buildup itself. Smooth Deposits with very fine stress relieving checks Deposits can take moderate Erosion combined with Heat Deposits doesn’t chunk in service All position Electrode, Easy Slag Removal Minimal time required for set up Ease of Removing Slag Product FeatureUser Benefit Can be used on Mn, Cast & Malleable Irons Variety of Applications usage Hardness : 60-65 HRC Severe Abrasion Resistance and Moderate Erosion at high temperatures.

40. SUPER STANHARD CR 77 Rich Chromium Carbide with secondary Carbides in a Touch Eutectic Matrix Maximum Abrasion Resistance at Higher temperatures. Ripple Free deposits- Bald Deposit Can resist erosion Resistance atmospheres also Whitish Bead Appearance Deposits can resist corrosion to a moderate extent Temperature resistance up to 550 0 C Hardness retention at high temperatures also. Product FeatureUser Benefit Touch Eutectic matrix Deposits can take Impact. Hardness : 57-60HRC Deposits can resist Abrasion Corrosion Impact Erosion Heat

41. SUPER STANHARD CC 78 Complex Carbide Deposit with Primary Chromium Carbides Can withstand Severe Grinding Abrasion Slag Less Deposits & Rapid Depositions High Metal Recovery Low welders fatique Minimal Stress relieving Checks Deposits doesn’t chunk in service Temperature resistance up to 500 0 C Hardness retention at high temperatures also. Product FeatureUser Benefit Can be used on all Ferrous Base Metals Wide Base Metal Compatibility Hardness : 63- 65 HRc Deposits can resist Severe Abrasion Heat Mild Erosion & Impact

42. SUPER STANHARD HT 79 Complex Carbide Deposit with rich secondary & tertiary Carbides Can withstand Severe Grinding Abrasion Combined with Erosion & Heat Slag Less Deposits & Rapid Depositions High Metal Recovery Low welders fatique Minimal Stress relieving Checks Deposits doesn’t chunk in service Temperature resistance up to 850 0 C Hardness retention at high temperatures also. Product FeatureUser Benefit Can be used on all Ferrous Base Metals Wide Base Metal Compatibility Hardness : 63- 67 HRc Deposits can resist Severe Abrasion Severe Erosion & Impact Combined with Heat

43. SUPER STANHARD HS 80 High Speed Steel type of Deposit Deposits will have edge retention at High temperatures. Deposits exhibit low coefficient of friction. Low material loss due to Low friction Low geometry loss. Minimal or Stress relieving Checks Hard and Sound Deposit, which is necessary for punches & Dies Deposits are heat Treatable Ideally Suited for Dies, Punches and Trimmers. Product FeatureUser Benefit Can be used on all Ferrous Base Metals Wide Base Metal Compatibility Hardness : 60- 65 HRc Deposits can resist Friction Severe Abrasion Edge Retention Combined with Heat

44. SUPER STANHARD UL 81 High performance Boron, Chromium Carbides in deposits with high volume Fraction. Deposits Exhibit Severe Abrasion combined with other wear Factors. Has the highest wear factor. Deposits can resist temperature till 800 0 C Hardness retention at High temperatures Higher Life for components Minimal or Stress relieving Checks Chunking doesn’t take place Touch and strong Matrix Ideally suited alloy for hardfacing applications involving High Load & High Wear Product FeatureUser Benefit All positonal alloy with High metal Recovery Ease of Application Rapid Deposition Hardness : 60- 65 HRc Deposits can resist Friction Severe Abrasion & Erosion Moderate Impact Combined with Heat

45. Hardfacing SUPER STANHARD CR 82 Maximum Abrasion Resistance at Higher temperatures. Ripple Free deposits- Bald Deposit Can resist erosion Resistance atmospheres also Whitish Bead Appearance Deposits can resist corrosion to a moderate extent Temperature resistance up to 450 0 C Hardness retention at high temperatures also. Touch Eutectic matrix Deposits can take Impact. Hardness : 57-60HRC Deposits can resist Abrasion Corrosion Impact Erosion Heat Rich Chromium Carbide with secondary Carbides in a Touch Eutectic Matrix Product FeatureUser Benefit

46. SUPER STANHARD PASTE 83 High Volume Fraction of Boron Carbide rich Deposits Severe Erosion Resistance Severe Abrasion Resistance & high Temp. Deposits can resist temperature till 900 0 C Hardness retention at High temperatures Higher Life for components No Stress relieving Checks Chunking doesn’t take place Hardness in 1.5mm Deposit Minimal Alloy Consumption Low Dilution to the base metal Product FeatureUser Benefit Good Covereage of 300 cm 3 /1.5 mm/kg Lower Alloy Consumption Superior Performance Deposits can resist Severe Erosion Severe Abrasion Combined with Heat Hardness : 68-70HRC

47. SUPER STANHARD CC 84 Deposits rich in Complex Carbides in a Austenitic Matrix High Abrasion resistance Combined with High Impact & Erosion Deposits can resist temperature till 550 0 C Hardness retention at High temperatures Higher Life for components High Build Up possible No Stress Relieving Chekcs High Impact resistance Combined with Erosion & Abrasion Resistance Deposits Retain Edge Suited for Die Reclamation applications also. Product FeatureUser Benefit Deposits Doesn’t spall in service Deposits can take Maximum Impact Doesn’t squeeze out. Hardness : 54-57 HRc Deposits can resist Moderate Impact Severe Abrasion Combined with Heat

48. COBALT ALLOYS

49. Cobalt Alloys SUPER STANHARD C0 06 -High resistance to Impact, Abrasion, Friction at high temperatures -Co-Cr-Mo system gives maximum protection to base metal -Outstanding weldability with crack resistance -Best protection to thermal & mechanical shocking -All positional electrode -Self releasing slag -Hardness : 45 HRc

50. Cobalt Alloys SUPER STANHARD C0 12 -High resistance at high temperatures -High Hot hardness -Outstanding weldability with crack resistance -For Hot pressing, shearing, hot forging dies -All positional electrode -Self releasing slag -Hardness : 50 HRc

51. Cobalt Alloys SUPER STANHARD C0 21 -High resistance to Impact, Abrasion, Friction at high temperatures -High resistance in oxidation environments till 1200 degrees -High Hot hardness -Outstanding weldability with crack resistance -For High pressure steam valves, chemical valves, exhaust valves -All positional electrode -Self releasing slag -Hardness : 45- 50 HRc

52. HARDFACING- TUBULAR

53. SUPER STANHARD CC(T) 91 High Performance Chromium Carbide rich Deposits along with Secondary Carbides. Good Grinding Abrasion Resistance. Combined with erosion & Heat Highest Metal Recovery – Seamless Tubular Construction Lower Alloy Consumption Good Cost Benefit applications No Carbide Charring – Due to Tubular Design High Current Density leading to ideal carbide orientation. No Flux Dropping, Single Layer Hardness & slag Less deposit Uniform Chemistry all along the bead. Lower Penetrations leading to low Dilution Minimal welder benefit. Product FeatureUser Benefit No Electrode Overheating Minimal stub Loss Maximum length usage. Hardness : 57-62 HRc Deposits can resist Severe Abrasion Moderate Erosion Combined with Heat

54. SUPER STANHARD HT(T) 92 High Performance Chromium Carbide rich Deposits along with Secondary Carbides. Good Grinding Abrasion Resistance. Combined with erosion & Heat Highest Metal Recovery – Seamless Tubular Construction Lower Alloy Consumption Good Cost Benefit applications No Carbide Charring – Due to Tubular Design High Current Density leading to ideal carbide orientation. No Flux Dropping, Single Layer Hardness & slag Less deposit Uniform Chemistry all along the bead. Lower Penetrations leading to low Dilution Minimal welder benefit. Product FeatureUser Benefit No Electrode Overheating Minimal stub Loss Maximum length usage. Hardness : 58-64HRc Deposits can resist Severe Abrasion Moderate Erosion Combined with Heat Deposits can Resist Temperature up to 750 0 C Hardness Retention at High temperatures.

55. SUPER STANHARD HT(T) 93 Complex Carbide Rich deposits Good Grinding Abrasion/ Erosion Resistance. Combined with Heat Highest Metal Recovery – Seamless Tubular Construction Lower Alloy Consumption Good Cost Benefit applications No Carbide Charring – Due to Tubular Design High Current Density leading to ideal carbide orientation. No Flux Dropping, Single Layer Hardness & slag Less deposit Uniform Chemistry all along the bead. Lower Penetrations leading to low Dilution Minimal welder benefit. Product FeatureUser Benefit No Electrode Overheating Minimal stub Loss Maximum length usage. Hardness : 60-65 HRc Deposits can resist Severe Abrasion Severe Erosion Combined with Heat Deposits can Resist Temperature up to 950 0 C Hardness Retention at High temperatures.

56. METAL PREPARATION

57. SUPER STAN GOUGE Low Burn off Rate Low Electrode Consumption. Higher Productivity Emits White Smoke Ease oF Spotting the Cracks Delayed Arc Easy positioning of the electrode. U Groove preparation Optimum “U” Groove Preparation of the base metal Product FeatureUser Benefit Emits High Exothermic Gases Maximum Gouging Performance. High Current Carrying capacity No electrode overheating and wastage thereon

58. Metal Preparation SUPER STAN CUT -High arc force leading to excellent cutting action -No electrode overheating till the end -Exothermic coating & highly concentrated arc -Can be used for any metal.

59. SUPER STAN CUT Low Burn off Rate Low Electrode Consumption. Higher Productivity Delayed Arc Easy positioning of the electrode. Product FeatureUser Benefit High Piercing Capability Efficient cutting action.

60. Thank You