Presentation is loading. Please wait.

Presentation is loading. Please wait.

Doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) TGax Functional Requirement Discussion Date: 2014-09 Slide 1 Authors: NameAffiliationAddressEmail.

Published byLeslie Franklin Modified over 8 years ago

Similar presentations

Presentation on theme: "Doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) TGax Functional Requirement Discussion Date: 2014-09 Slide 1 Authors: NameAffiliationAddressEmail."— Presentation transcript:

1 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) TGax Functional Requirement Discussion Date: 2014-09 Slide 1 Authors: NameAffiliationAddressEmail Yonggang FangZTEyfang@ztetx.com Bo SunZTEsun.bo1@zte.com.cn Ke YaoZTEke.yao@zte.com.cn Kaiying LvZTElv.kaiying@zte.com.cn Zhendong LuoCATRluozhendong@catr.cn Meng YangCATRyangmeng1@catr.cn Jiadong DuCATRdujiadong@catr.cn

2 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Background TGax PAR [1] and CSD [2] have defined the scope of amendment of 802.11, focusing on –WLAN deployments with dense stations and dense access points where interference from neighboring devices is an issue affecting the perceived user experience. –Improving system level performance and utilization of the spectrum resources as well as interference mitigation and management between neighboring OBSS. The contribution discusses functional requirements of TGax amendment based on TGax scopes. Slide 2

3 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Efficiency Requirement Discussion (1) Efficiency Improvement in PAR –TGax is the amendment of IEEE 802.11 mainly for High Efficiency WLAN: Operating in 2.4 GHz and 5 GHz frequency bands In indoor and outdoor dense deployment scenario Working environment like –wireless corporate office, outdoor hotspot, dense residential apartments, and stadiums. –TGax PAR [1] requires to make more efficient use of spectrum resources in scenarios with a high density of STAs per BSS. significantly increase spectral frequency reuse and manage interference between neighboring overlapping BSS (OBSS) in scenarios with a high density of both STAs and BSSs. Slide 3

4 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Efficiency Requirement Discussion (2) Efficiency Issues –MAC Efficiency issue WLAN is expected to deploy in the high dense environment, like hotspots, stadium, offices, conference rooms etc. Contributions [3] [4] [5] pointed out that the current MAC of 802.11 is not efficient for the high dense deployment. When the density of STAs reaches a certain level, the collision possibility of using current EDCA mechanism for medium access is very high. In such high dense deployment cases, most of medium time would be wasted for control and management frames or re- transmission due to collisions. [6] indicated that the current 802.11 MAC is not efficient to handle short frame transmission. –Spectral Efficiency The current primary and secondary channel assessment mechanism is not permitted to fully use of available channel bandwidth and causes the waste of spectrum. Slide 4

5 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Efficiency Requirement Discussion (3) Efficiency Definitions –Wikipedia (http://en.wikipedia.org/wiki/Spectral_efficiency) defines :http://en.wikipedia.org/wiki/Spectral_efficiency “The spectrum efficiency refers to the information rate that can be transmitted over a given bandwidth in a specific communication system. It is a measure of how efficiently a limited frequency spectrum is utilized by the physical layer protocol, and sometimes by the media access control (the channel access protocol).” –The spectrum efficiency includes the link spectrum efficiency, measured in (bit/s)/Hz; –It is the net bit rate or maximum throughput divided by the bandwidth in hertz of a communication channel or a data link. system spectrum efficiency or area spectrum efficiency measured in (bit/s)/Hz per unit area or cell. –That is based on the link spectrum efficiency and considering interference from neighbor cells and frequency reuse factor. Slide 5

6 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Efficiency Requirement Discussion (4) Proposed Efficiency Requirement in FRD –The 802.11ax amendment shall provide a mechanism to improve spectral efficiency including the link spectrum efficiency and system spectrum efficiency, in scenarios of high density deployment of 802.11ax STAs with and without the presence of legacy STAs. Slide 6

7 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Packet Delay Requirement Discussion (1) Packet Delay in PAR –In TGax PAR [1], it clearly mentions that this amendment is different from the previous versions of amendment which focused on improving aggregated throughput. –Instead, TGax is to focus on improving user experience such as the average per-STA throughput and 5 th percentile of the per station throughput distribution in a given area, along with the satisfaction of the packet delay and the packet error ratio (PER) requirements of applications. –The user experience could be measured in following aspects: Average per-STA throughput Transmission latency which is especially important to real-time applications, like gaming, video streaming, etc. PER Slide 7

8 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Packet Delay Requirement Discussion (2) Proposed Latency Requirement in FRD –TGAx Rn: The 802.11ax amendment shall quantify and bring latency to a desirable level to meet QoS requirements in high dense deployment scenario. define a mechanism to improve the average transmission latency, compared to the existing IEEE 802.11 standard and its amendments operating in the same dense deployment scenario. Slide 8

9 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Robustness Requirement Discussion (1) Robustness in PAR –TGax PAR [1] requires to increase robustness in outdoor propagation environments and uplink transmissions. –This PAR amendment requirement indicates the issue of successful transmission ratio due to loss of packets and would like to reduce the number of retransmissions especially in the dense deployment scenario. –Improving transmission robustness will in turn to help improving the efficiency and saving battery power. Slide 9

10 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Robustness Requirement Discussion (2) Proposed Robustness Requirement in FRD –TGAx Rn: The 802.11ax amendment shall bring PER to a desirable level to make the link robust in high dense deployment scenario. increase the probability of successful frame transmissions (i.e. reduce packet error rate (PER), compared to the existing IEEE 802.11 standard and its amendments operating in the same dense deployment scenarios Slide 10

11 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Straw Polls SP1: Do you support to add the efficiency requirement in page 6 to the FRD? –Yes/No/Abstain SP2: Do you support to add the latency requirement in page 8 to FRD? –Yes/No/Abstain SP3: Do you support to add the robustness requirement of page 10 to the FRD? – Yes/No/Abstain Slide 11

12 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Motion-1 Move to add the following text to the TGax Functional Requirement document 11-14-1009-01-00ax-proposed-802- 11ax-functional-requirements:11-14-1009-01-00ax-proposed-802- 11ax-functional-requirements 2.x Latency Requirements TGAx Rn: The 802.11ax amendment shall quantify and bring latency to a desirable level to meet QoS requirements in high dense deployment scenario. –Move: Second: –Yes/No/Abstain Slide 12

13 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) Motion-2 Move to add the following text to the TGax Functional Requirement document 11-14-1009-01-00ax-proposed-802- 11ax-functional-requirements :11-14-1009-01-00ax-proposed-802- 11ax-functional-requirements 2.x Robustness Requirements TGAx Rn: The 802.11ax amendment shall bring PER to a desirable level to make the link robust in high dense deployment scenario. –Move: Second: – Yes/No/Abstain Slide 13

14 doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) References 1.11-14-0165-01-0hew-802-11-hew-sg-proposed-par 2.11-14-0169-01-0hew-ieee-802-11-hew-sg-proposed-csd 3.11-13-0505-00-0hew-mac-efficiecy-analysis-for-hew-sg 4.11-11-1512-04-00ah-mac-considerations-for-802-11ah 5.Hai. Vu and Taka Sakurai, “Collision Probability in Saturated IEEE 802.11 Networks”; http://caia.swin.edu.au/pubs/ATNAC06/Vum.pdf 6.11-14-0855-00-00ax-techniques-for-short-downlink-frames Slide 14

Download ppt "Doc.: IEEE 802.11-14/1167r2 Sept 2014 SubmissionYonggang Fang et. al. (ZTE) TGax Functional Requirement Discussion Date: 2014-09 Slide 1 Authors: NameAffiliationAddressEmail."

Similar presentations

EETS 8316 : WIRELESS NETWORKS Vamsi Krishna Medharametla 39873747.

EETS 8316 : WIRELESS NETWORKS Vamsi Krishna Medharametla
Doc.: IEEE 802.11-14/0604r1 Submission May 2014 Slide 1 Modeling and Evaluating Variable Bit rate Video Steaming for 802.11ax Date: 2014-05-12 Authors:

Doc.: IEEE /0604r1 Submission May 2014 Slide 1 Modeling and Evaluating Variable Bit rate Video Steaming for ax Date: Authors:
Submission doc.: IEEE 802.11-14/1225r1 Considerations on CCA for OBSS Opearation in 802.11ax Date: 2014-09-11 Slide 1Huawei Authors:

Submission doc.: IEEE /1225r1 Considerations on CCA for OBSS Opearation in ax Date: Slide 1Huawei Authors:
Doc.: IEEE 802.11-14/0806r0 SubmissionSlide 1 Date: 2014-07-12 Authors: 802.11aj (45 GHz) Channelization and Channel Operation Jul 2014 Bo Sun, ZTE Corp.

Doc.: IEEE /0806r0 SubmissionSlide 1 Date: Authors: aj (45 GHz) Channelization and Channel Operation Jul 2014 Bo Sun, ZTE Corp.
Doc.: IEEE 802.11-15/0543r0 Submission May 2015 TG ax Scenarios Proposed additions for frequency re-use Date: 2015-05 Authors: Graham Smith, SR TechnologiesSlide.

Doc.: IEEE /0543r0 Submission May 2015 TG ax Scenarios Proposed additions for frequency re-use Date: Authors: Graham Smith, SR TechnologiesSlide.
Sleep States in IEEE ax Simulation Scenarios

Sleep States in IEEE ax Simulation Scenarios
Submission doc.: IEEE 11-14/1162r1 September 2014 Eric Wong et al (Apple)Slide 1 Energy Efficiency Evaluation Methodology Follow Up Date: 2014-09-15 Authors:

Submission doc.: IEEE 11-14/1162r1 September 2014 Eric Wong et al (Apple)Slide 1 Energy Efficiency Evaluation Methodology Follow Up Date: Authors:
Doc.: IEEE 802.11-14/0861r0 SubmissionSayantan Choudhury Impact of CCA adaptation on spatial reuse in dense residential scenario Date: 2014-07-14 Authors:

Doc.: IEEE /0861r0 SubmissionSayantan Choudhury Impact of CCA adaptation on spatial reuse in dense residential scenario Date: Authors:
Doc.: IEEE 802.11-14/1168r1 Sept 2014 Submission Yonggang Fang et. al. (ZTE) 802.11 TGax PHY Frame Structure Discussion for Enabling New Contention Mechanism.

Doc.: IEEE /1168r1 Sept 2014 Submission Yonggang Fang et. al. (ZTE) TGax PHY Frame Structure Discussion for Enabling New Contention Mechanism.
Doc.: IEEE 802.11-14/0818r1 July 2014 SubmissionYonggang Fang et. al. (ZTE) Synchronization Requirements Date: 2014-07-14 Slide 1 Authors: NameAffiliationAddressEmail.

Doc.: IEEE /0818r1 July 2014 SubmissionYonggang Fang et. al. (ZTE) Synchronization Requirements Date: Slide 1 Authors: NameAffiliationAddress .
Submission doc.: IEEE 802.11-15/0353r1 March 2015 Jinsoo Ahn, Yonsei UniversitySlide 1 OFDMA Non-contiguous Channel Utilization Date: 2015-03-10 Authors:

Submission doc.: IEEE /0353r1 March 2015 Jinsoo Ahn, Yonsei UniversitySlide 1 OFDMA Non-contiguous Channel Utilization Date: Authors:
Discussion on OFDMA in IEEE ax

Discussion on OFDMA in IEEE ax
Submission doc.: IEEE 802.11-14/1208r1 September 2014 Jinsoo Ahn, Yonsei UniversitySlide 1 MAC considerations on 802.11ax OFDMA Date: 2014-09-17 Authors:

Submission doc.: IEEE /1208r1 September 2014 Jinsoo Ahn, Yonsei UniversitySlide 1 MAC considerations on ax OFDMA Date: Authors:
Doc.: IEEE 80211-15/0882r1 Submission DSC leveraging uplink RTS/CTS control Authors: July 2015.

Doc.: IEEE /0882r1 Submission DSC leveraging uplink RTS/CTS control Authors: July 2015.
Doc.: IEEE 802.11-14/0107 Jan 2014 SubmissionYonggang Fang et. al. (ZTE) HEW Evaluation Metrics Date: 2014-01-20 Slide 1 Authors: NameAffiliationAddressEmail.

Doc.: IEEE /0107 Jan 2014 SubmissionYonggang Fang et. al. (ZTE) HEW Evaluation Metrics Date: Slide 1 Authors: NameAffiliationAddress .
Doc.: IEEE 802.11-12/1126r0 Submission September 2012 Krishna Sayana, SamsungSlide 1 Wi-Fi for Hotspot Deployments and Cellular Offload Date: 2012-09-18.

Doc.: IEEE /1126r0 Submission September 2012 Krishna Sayana, SamsungSlide 1 Wi-Fi for Hotspot Deployments and Cellular Offload Date:
Doc.: IEEE 802.11-13/1370 Nov 2013 SubmissionZTE, CMCC, LTE OOB Interference to 2.4GHz Band Date: 2013-11-11 Slide 1 Authors: NameAffiliationAddressEmail.

Doc.: IEEE /1370 Nov 2013 SubmissionZTE, CMCC, LTE OOB Interference to 2.4GHz Band Date: Slide 1 Authors: NameAffiliationAddress .
Submission doc.: IEEE 802.11-15/870r2 July 2015 Guido R. Hiertz et al., EricssonSlide 1 802.11ax in 2.4 GHz Date: 2015-07-14 Authors:

Submission doc.: IEEE /870r2 July 2015 Guido R. Hiertz et al., EricssonSlide ax in 2.4 GHz Date: Authors:
Doc.: IEEE 802.11-14/0214r2 Submission February 2014 Perahia, Cariou, Cho, Inoue, Liu and TaoriSlide 1 High Efficiency WLAN Overview Date: 2014-02-18 Authors:

Doc.: IEEE /0214r2 Submission February 2014 Perahia, Cariou, Cho, Inoue, Liu and TaoriSlide 1 High Efficiency WLAN Overview Date: Authors:
Doc.: 11-14-0164-00 Submission January 22, 2014 Rene Struik (Struik Security Consultancy)Slide 1 802.11 Privacy & HEW Date: 2014-01-22 Authors: NameCompanyAddressPhoneemail.

Doc.: Submission January 22, 2014 Rene Struik (Struik Security Consultancy)Slide Privacy & HEW Date: Authors: NameCompanyAddressPhone .

Similar presentations

Ads by Google