1. Bang & Olufsen BtB – How to update the BtB module

2. 1. Connecting
Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack)
RS232 is called “1 HOTEL DATA” on BV10.
On BeoVision 7-40 use the port labeled ‘RS232’
On BeoSystem 3 use the port labeled ‘RS232’
BeoVision 8/10 BtB module BeoVision 7-40 back
RS232 port and OC is not always left and right.
On BV10-40 and 46” RS232 is located to the right, when looking from behind.
One BV10-32 RS232 is located to the left.
On BeoVision 10, RS232 is always called ”1 HOTEL DATA” and OC is always called ”3. Service”

3. 1. Connecting
Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack)
RS232 is called “1 HOTEL DATA” on BV10.
On BeoVision 7-32 use the P2 connector.
BeoVision 7-32 back

4. 2. Updating the module Open the BtB upgrader.
Follow the instruction of the BtB upgrader and press Start.
Bang & Olufsen Concept Store
Bang & Olufsen Concept Store

5. 3. Verify software version
First disable the BtB mode by pressing “Menu, 0, 0, GO” on the remote, if this has already been set.
Turn the TV on and press Menu
Move the cursor to the OPTIONS menu and press “0, 0, GO”. Now choose the Business To Business menu.
TV SETUP
TUNING
SLEEP TIMER
▼select accept o
SERVICE MENU
MONITOR
TV-TUNER
BUSINESS TO BUSINESS
DVB SERVICE
PRODUCT TYPE
AUDIO SERVICE
SETTINGS
▼select accept o
OPTIONS
BUSINESS TO BUSINESS

6. 3. Verify software version
In the Business To Business menu in the TV service menu, you can find the BtB application software version (in this case 6.62v).
In here you will also be able to enable or disable the BtB mode.
BUSINESS TO BUSINESS
BTB ENABLE OFF
BTB SETTINGS
BTB VERIFICATION TEST
BTB INSTALLATION SETUP
STBC POWER ON 5 V
BTB AP SW v
BTB M-STB ID Unknown
▼select accept o
BTB ENABLE OFF

7. The End