Download presentation
Presentation is loading. Please wait.
1
The Power of Thermodynamics in the Characterization of Materials Zeki Y. Al-Saigh Department of Chemistry Buffalo State, State University of New York 1300 Elmwood Avenue Buffalo, N.Y., USA
2
Outline Background about Materials Techniques used in the Characterization The Physics of Characterization Results Derived from the Speaker’s Research: Polymers, Polymer Blends, Conducting Polymers, Biodegradable Polymers.
3
Characterization of Materials Obtaining information on the physical and chemical properties of materials, such as: Mechanical Properties Thermal Properties Interaction Forces Among Molecules Crystallinity Molecular Weight Diffusion of Gases into Layers
4
Materials: Can be anything which exists in nature: Plastics (polymers), synthetic and natural Rubbers Alloy and Ceramics Oil, Coal and carbon fibers Powders and clay Food
5
Polymer Blends –A new class of materials is always needed to replace heavy metal alloys.
6
Polymer Blends Blending of polymers is a fast and inexpensive route to obtaining a new class of materials Z.Y.Al-Saigh, International J. of Polymer Analysis and Characterization, 3, 249-291 (1997) FOR MORE INFO on IGC of polymer blends...
7
Polymer Blends Solubility of Polymers is the key term in polymer characterization
8
Polymer Blends A pair of polymers may be: Compatible (soluble) Incompatible (insoluble) Partially compatible Z.Y.Al-Saigh, Trends in Polymer Science, 5, 97 (1997) FOR MORE INFO on IGC of polymer blends...
9
Present Techniques Available Glass transition temperature Thermal & mechanical NMR Electron spin resonance Solvent vapor sorption heat of mixing Small angle light & X-ray scattering Small angle neutron scattering Inverse gas chromatography
10
Unfortunately Most of these techniques are beset by a number of technical difficulties
11
For Example Vapor sorption method takes a long time for the establishment of equilibrium between the vapor and the polymer Neutron scattering uses modified dueterated polymers which are chemically different from the parent polymer
12
Gas Chromatography As an alternative method for polymer analysis and characterization Al-Saigh, Z.Y. and Guillet, J., in “Inverse Gas Chromatography in Analysis of Polymers and Rubbers”, Invited Chapter. Encyclopedia of Analytical Chemistry: Instrumentation and Applications, R. Meyers, Editor, PP. 7759-7792, John Wiley & Sons Ltd, Chichester, (2000).
13
Gas Chromatography is: A technique by which a mixture of components can be separated, analyzed and quantified. It works on the principle of interactions of two phases; stationary and mobile. The stationary phase contains material with active interaction sites, such as sand. The mobile phase is the vapor of the mixture to be analyzed.
14
Inverse Gas Chromatography The method is called inverse gas chromatography because the stationary phase (polymers or polymer blends) is of interest, unlike the traditional GC method.
15
Thermodynamics of IGC
16
Inverse Gas Chromatography IGC may provide data about: Polymer-solvent interaction Homopolymers Blends Diffusion Glass Transition
17
Current Use of IGC 1. Interaction parameters of polymer- solvent systems 2. Interaction parameters of polymer- polymer systems 3. Solubility parameters and weight fraction coefficients 4. Molar heat, free energy, and entropy of mixing 5. Molar heat, free energy, and entropy of sorption
18
6. Degree of crystallinity of semicrystalline polymers 7. Diffusion of gases and liquids into the polymer layer 8. Glass transition and melting temperatures 9. Surface energy of solids 10.Detection of melting point depression of a polymer blend as an indicator of miscibility
19
Background: Thermodynamics of IGC
20
Thermodynamics of IGC
21
Heats of the Mixing Process
22
Thermodynamics of Polymer Blends Miscibility
23
Blend of semicrystalline diluent Are interesting systems for the characterization by inverse gas chromatography C.T.Chen and Z.Y.Al-Saigh, Macromolecules, 24, 3788 (19910 FOR MORE INFO...
24
Blend of semicrystalline diluent Two blend systems were studied: Poly(vinylidene fluoride)-poly(ethyl methacrylate) [PVF2-PEMA] Poly(vinylidene fluoride)-poly(vinyl methyl ketone) [PVF2-PVMK]
25
Blend of semicrystalline diluent Above PVF2 m.p., both polymers are at melt Below PVF2 m.p., two retention mechanisms are expected: Adsorption of solutes on crystal surfaces Absorption of solutes by the amorphous layer
26
Blends of semicrystalline diluent
27
Blend of Semicrystalline Diluent
28
Conducting Polymers: The unique properties have lead to an interest in the potential use of PANI as a new class of conductors. This interest was generated due to the relative ease of synthesis, low cost, and the stability of PANI in the air. However, the insulating form a PANI, polyaniline emeraldine base (PANI-EB) suffers from the limited solubility in organic solvents.
29
Dependence of V g of Acetates-PANI-EB on Temperature (130 – 170 ° C)
30
Dependence of V g of Alkanes-PANI-HEBSA on Temperature (80 – 130 ° C)
31
Table III : Interaction Parameters of Alkanes at a Temperature Range 140-170 ° C for 7% PANI-EB
32
Table IV : Interaction Parameters of Alkanes at a Temperature Range 80-130 ° C for 7% PANI-HEBSA
33
Table V : Molar Heat of Sorption, s, of both PANI-EB and PANI-HEBSA
34
Surface Energy
35
Table VI : Dispersive Surface Energies of PANI-EB and PANI-HEBSA and CH2
36
Surface Energy (mJ/m A 2) 11.04 26.47 200 41.50 40.00 28.90 20.30 33.10 61.00-106.00 Surface Energies of Polymers Polymer PEO PVMK Hg PVC PMMA Polypropylene Polyurethane Polyethylene doped PPY Comparative Data on Surface Energy of Several Polymers
37
Inverse Gas Chromatography of Polyaniline REFERENCES: By Ali Al-Ghamdi & Zeki Y. Al- Saigh, Journal of Chromatography, A, 969, (2002) 229. Al-Saigh & Guillet, Encyclopedia of Analytical Chemistry, Volume 9, Page 7759 (2000), Wiley.
38
Application of IGC to Biodegradable Polymers ------------------------------------------------------------ Fibers acid/base interaction potential Wettability test (determination of water sorption isotherm) Surface adsorption characterization Thermodynamic studies wood-polymer interface studies
39
Current Research Characterization of Starch-Based Polymers such as Amylopectin Amylopectin is known to be mechanically weak. Blending Amylopectin with another biodegradable polymer may improve the mechanical properties.
40
Amylopectin – Alkanes Syatems
41
Amylopectin – Alcohols Syatem
42
Effect of Temperature on the Interaction Parameters, χ 12
43
Effect of Number of Carbon on the Interaction Parameters, χ 12
44
Degree of Crystallinity of Amylopectin
45
The dispersive Surface Energy, γ s d, of Amylopectin Temperature, o Cγ CH2, mJ/m 2 γ s d, mJ/m 2 8032.160.24 10031.000.075 20025.200.028
46
Latest Applications of IGC Amorphous, co-polymer and blends Semicrystalline polymers and blends Inorganic polymers Amorphous-plasticizer blend Conducting polymers Rubbers Coal and carbon fibers Powders and clay Food
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.