1. 1 Chapter 3 The Media : Conducted and Wireless Data Communications and Computer Networks: A Business User’s Approach

2. 2 Data Communications and Computer Networks Chapter 3 Introduction The world of computer networks and data communications would not exist if there were no medium by which to transfer data. The two major categories of media include: Conducted media Wireless media

3. 3 Data Communications and Computer Networks Chapter 3 Twisted Pair Wire One or more pairs of single conductor wires that have been twisted around each other. Twisted pair wire is classified by category. Twisted pair wire is currently Category 1 through Category 6, although Categories 2 and 4 are obsolete. Twisting the wires helps to eliminate electromagnetic interference between the two wires. Shielding can further help to eliminate interference.

4. 4 Data Communications and Computer Networks Chapter 3

5. 5 Data Communications and Computer Networks Chapter 3

6. 6 Data Communications and Computer Networks Chapter 3

7. 7

8. 8 Data Communications and Computer Networks Chapter 3 Coaxial Cable A single wire wrapped in a foam insulation surrounded by a braided metal shield, then covered in a plastic jacket. Cable can be thick or thin. Baseband coaxial technology uses digital signaling in which the cable carries only one channel of digital data. Broadband coaxial technology transmits analog signals and is capable of supporting multiple channels of data.

9. 9 Data Communications and Computer Networks Chapter 3

10. 10 Data Communications and Computer Networks Chapter 3

11. 11 Data Communications and Computer Networks Chapter 3 Fiber Optic Cable A thin glass cable approximately a little thicker than a human hair surrounded by a plastic coating and packaged into an insulated cable. A photo diode or laser generates pulses of light which travel down the fiber optic cable and are received by a photo receptor.

12. 12 Data Communications and Computer Networks Chapter 3

13. 13 Data Communications and Computer Networks Chapter 3 Fiber Optic Cable Fiber optic cable is capable of supporting millions of bits per second for 1000s of meters Thick cable (62.5/125 micron) causes more ray collisions, so you have to transmit slower. This is step index multimode fiber. Typically use LED for light source, shorter distance transmissions Thin cable – very thin (8.3/125 microns) – very little reflection, fast transmission, typically uses a laser, longer distance transmissions. AKA single mode fiber

14. 14 Data Communications and Computer Networks Chapter 3

15. 15 Data Communications and Computer Networks Chapter 3 Fiber Optic Cable Fiber optic cable is susceptible to reflection (where the light source bounces around inside the cable) and refraction (where the light source passes out of the core and into the surrounding cladding). Thus, fiber optic cable is not perfect either. Noise is still a potential problem.

16. 16 Data Communications and Computer Networks Chapter 3 It is very common to mix fiber with twisted pair in LANs.

17. 17 Data Communications and Computer Networks Chapter 3

18. 18 Data Communications and Computer Networks Chapter 3 Wireless Media Radio, satellite transmissions, and infrared light are all different forms of electromagnetic waves that are used to transmit data. Note in the following figure how each source occupies a different set of frequencies.

19. 19 Data Communications and Computer Networks Chapter 3

20. 20 Data Communications and Computer Networks Chapter 3 Terrestrial Microwave Land-based, line-of-sight transmission Approximately 20-30 miles maximum between towers Transmits data at hundreds of millions of bits per second Popular with telephone companies and business to business transmissions

21. 21 Data Communications and Computer Networks Chapter 3

22. 22 Data Communications and Computer Networks Chapter 3 Often the microwave antennas are on towers and buildings.

23. 23 Data Communications and Computer Networks Chapter 3 Satellite Microwave Similar to terrestrial microwave except the signal travels from a ground station on earth to a satellite and back to another ground station. Satellites can be classified by how far out into orbit each one is (LEO, MEO, GEO, and HEO).

24. 24 Data Communications and Computer Networks Chapter 3

25. 25 Data Communications and Computer Networks Chapter 3 Satellite Microwave LEO - Low Earth Orbit - 100 miles to 1000 miles. Used for pagers, wireless e-mail, special mobile telephones, spying, videoconferencing. MEO - Middle Earth Orbit - 1000 to 22,300 miles. Used for GPS (global positioning systems) and government. GEO - Geosynchronous Orbit - 22,300 miles. Always over the same position on earth (and usually over the equator). Used for weather, television, and government operations.

26. 26 Data Communications and Computer Networks Chapter 3 Satellite Microwave HEO – Highly Elliptical Orbit A fourth type of orbit used by the military for spying and by scientific organizations for photographing celestial bodies. When satellite is far out into space, it takes photos. When satellite is close to earth, it transmits data.

27. 27 Data Communications and Computer Networks Chapter 3

28. 28 Data Communications and Computer Networks Chapter 3 Satellite Microwave Satellite microwave can also be classified by its configuration: Bulk carrier configuration Multiplexed configuration Single-user earth station configuration (e.g. VSAT)

29. 29 Data Communications and Computer Networks Chapter 3

30. 30 Data Communications and Computer Networks Chapter 3 Cellular Telephone Wireless telephone service, also called mobile telephone, cell phone, and PCS. To support multiple users in a metropolitan area (market), the market is broken into cells. Each cell has its own transmission tower and set of assignable channels.

31. 31 Data Communications and Computer Networks Chapter 3

32. 32 Data Communications and Computer Networks Chapter 3

33. 33 Data Communications and Computer Networks Chapter 3 Cellular Telephone – 1 st Generation AMPS - Advanced Mobile Phone Service - First popular mobile phone service, uses analog signals and dynamically assigned frequency division multiplexing. D-AMPS - Digital Advanced Mobile Phone Service - Applies digital time division multiplexing on top of AMPS.

34. 34 Data Communications and Computer Networks Chapter 3 Cellular Telephone – 2 nd Generation PCS - Personal Communication Systems - All-digital mobile phone service 2 nd generation PCS phones came in three technologies: TDMA - Time division multiple access CDMA - Code division multiple access GSM - Global system for mobile communications

35. 35 Data Communications and Computer Networks Chapter 3 Cellular Telephone – 2.5 Generation AT&T Wireless, Cingular Wireless, and T-Mobile (formerly VoiceStream) now using GPRS (General Packet Radio Service) in their GSM networks (can transmit data at 30 kbps to 40 kbps) Verizon Wireless, Alltel, U.S. Cellular, and Sprint PCS are using CDMA2000 1xRTT (one carrier radio - transmission technology) (50 kbps to 75 kbps) Nextel uses IDEN technology

36. 36 Data Communications and Computer Networks Chapter 3 Cellular Telephone – 3 rd Generation UMTS (Universal Mobile Telecommunications System) - also called Wideband CDMA; the 3G version of GPRS; UMTS is not backward compatible with GSM, so first UMTS phones will have to be dual-mode; based on TDMA (same as D-AMPS and GSM) 1XEV (1 X Enhanced Version) - The 3G replacement for 1xRTT; will come in two flavors 1xEV-DO for data only 1xEV-DV for data and voice

37. 37 Data Communications and Computer Networks Chapter 3 Cellular Digital Packet Data Technology that supports a wireless connection for the transfer of computer data from a mobile location to the public telephone network and the Internet. Can be used in conjunction with mobile telephones and laptop computers. All digital transfer but relatively slow at 19,200 bps. Emergency services make use of CDPD.

38. 38 Data Communications and Computer Networks Chapter 3 Infrared Transmissions Special transmissions that use a focused ray of light in the infrared frequency range. Very common with remote control devices, but can also be used for device-to-device transfers, such as PDA to computer.

39. 39 Data Communications and Computer Networks Chapter 3 WAP (Wireless Application Protocol) WAP allows wireless devices such as mobile telephones, PDAs, pagers, and two-way radios to access the Internet. WAP is designed to work with small screens and with limited interactive controls. WAP incorporates Wireless Markup Language (WML) which is used to specify the format and presentation of text on the screen.

40. 40 Data Communications and Computer Networks Chapter 3 WAP (Wireless Application Protocol) WAP may be used for applications such as: - travel directions - sports scores - e-mail - online address books - traffic alerts - banking - news Possible short-comings of WAP include low speeds, security, and a very small user interface.

41. 41 Data Communications and Computer Networks Chapter 3

42. 42 Data Communications and Computer Networks Chapter 3 Broadband Wireless Systems Delivers Internet services into homes and businesses. Designed to bypass the local loop telephone line. Transmits voice, data and video over high frequency radio signals.

43. 43 Data Communications and Computer Networks Chapter 3

44. 44 Data Communications and Computer Networks Chapter 3 Broadband Wireless Systems Multichannel multipoint distribution service (MMDS) and local multipoint distribution service (LMDS) looked promising a couple years ago but died off. Now companies are eyeing Wi-Max – an IEEE 802.16 spec; initially 300k to 2M bps over a range of as much as 30 miles; forthcoming spec (802.16e) will allow for mobile devices

45. 45 Data Communications and Computer Networks Chapter 3 Bluetooth Bluetooth is a Radio Frequency specification for short- range, point-to-multipoint voice and data transfer. Bluetooth can transmit through solid, non-metal objects. Its typical link range is from 10 cm to 10 m, but can be extended to 100 m by increasing the power.

46. 46 Data Communications and Computer Networks Chapter 3 Bluetooth Bluetooth will enable users to connect to a wide range of computing and telecommunication devices without the need of connecting cables. Typical uses include phones and pagers, modems, LAN access devices, headsets, notebooks, desktop computers, and PDAs. Want to go to the movies?

47. 47 Data Communications and Computer Networks Chapter 3 Wireless LAN (IEEE 802.11) This technology transmits data between workstations and local area networks using high speed radio frequencies. Current technologies allow up to 54 Mbps data transfer at distances up to hundreds of feet. (IEEE 802.11b, a, g) More on this in Chapter Seven (LANs)

48. 48 Data Communications and Computer Networks Chapter 3 Free Space Optics Uses lasers, or more economically infrared transmitting devices Line of sight between buildings Typically short distances, such as across the street Newer auto-tracking systems keep lasers aligned when buildings shake from wind and traffic

49. 49 Data Communications and Computer Networks Chapter 3 Free Space Optics Current FSO speeds go from T-3 (45 Mbps) up to OC-48 (2.5 Gbps) with faster systems in the lab Major weakness is fog A typical FSO has a link margin of about 20 dB Under perfect conditions air reduces a system’s power by approx 1 dB/km

50. 50 Data Communications and Computer Networks Chapter 3 Free Space Optics Heavy fog can cause a loss of 400 db/km (rendering 20 dB systems to 50 meters) Scintillation is also a problem (especially in hot weather).

51. 51 Data Communications and Computer Networks Chapter 3 Ultra-wideband UWB not limited to a fixed bandwidth but broadcasts over a wide range of frequencies simultaneously. Many of these frequencies are used by other sources, but UWB uses such low power that it “should not” interfere with these other sources. Can achieve speeds up to 100 Mbps (unshared) but for small distances such as wireless LANs.

52. 52 Data Communications and Computer Networks Chapter 3 Ultra-wideband Proponents say UWB gets something for nothing, since it shares frequencies with other sources. Opponents say too much interference. Cell phone industry really against UWB because CDMA most susceptible to interference. GPS may also be affected One solution may be have two types of systems – one for indoors (stronger) and one for outdoors (1/10 the power)

53. 53 Data Communications and Computer Networks Chapter 3

54. 54

55. 55

56. 56 Data Communications and Computer Networks Chapter 3 Media Selection Criteria Cost Speed Distance and expandability Environment Security

57. 57 Data Communications and Computer Networks Chapter 3 Media Selection Criteria - Cost Different types of cost: Initial cost - What does a particular type of medium cost to purchase? To install? Maintenance/support cost ROI (return on investment) - If one medium is cheaper to purchase and install but is not cost effective, where is the savings?

58. 58 Data Communications and Computer Networks Chapter 3 Media Selection Criteria - Speed Two different forms of speed: Propagation speed: the time to send the first bit across the medium. This speed depends upon the medium. Airwaves and fiber are speed of light. Copper wire is two thirds the speed of light. Data transfer speed: the time to transmit the rest of the bits in the message. This speed is measured in bits per second.

59. 59 Data Communications and Computer Networks Chapter 3 Media Selection Criteria - Distance and Expandability Can this choice of medium be expanded easily? What is needed to extend the distance? A repeater? An amplifier? How much noise is introduced with this expansion?

60. 60 Data Communications and Computer Networks Chapter 3 Media Selection Criteria - Environment Is the intended environment electromagnetically noisy? If so, should you use shielding? Or fiber? If using wireless, are there other wireless signals that can interfere? Will the microwave or free space optics be affected by bad weather?

61. 61 Data Communications and Computer Networks Chapter 3 Media Selection Criteria - Security Is the medium going to be carrying secure data? Should you worry about wiretapping? Encryption of the signal/data can help, but may not be the perfect solution.

62. 62 Data Communications and Computer Networks Chapter 3 Conducted Media In Action How do we wire a local area network? Remember : using Category 5e unshielded twisted pair, the maximum segment length is 100 meters. A wall jack is a passive device and does not regenerate a signal. Hub to hub connections are often fiber optic cable.

63. 63 Data Communications and Computer Networks Chapter 3

64. 64 Data Communications and Computer Networks Chapter 3 Interconnecting Two Buildings Two buildings are separated by 400 meters. How do we interconnect them? Twisted pair?(Do we even have access?) Coax? Fiber? Wireless? Other? (Chapter 12)

65. 65 Data Communications and Computer Networks Chapter 3 Wireless Media In Action DataMining Corporation has one office in Chicago and one in Los Angeles. There is a need to transmit large amounts of data between the two sites. DataMining is considering using a Very Small Aperture Terminal satellite system.

66. 66 Data Communications and Computer Networks Chapter 3 Wireless Media In Action Cost is proportional to high amount of traffic with very high reliability. Speed is high enough to support company’s needs. Distance can easily expand across the U.S. Satellite systems are robust in most environments. Security can be very good with encryption.

67. 67 Data Communications and Computer Networks Chapter 3