Presentation is loading. Please wait.

Presentation is loading. Please wait.

Onboard Filter Update Performance after updated cuts David Wren 26 January 2004.

Similar presentations


Presentation on theme: "Onboard Filter Update Performance after updated cuts David Wren 26 January 2004."— Presentation transcript:

1 Onboard Filter Update Performance after updated cuts David Wren 26 January 2004

2 Summary of Main Points from Last Meeting The Filter performance had improved substantially –This was done through minor changes to the logic The Filter vetoed a fraction of events that remained after the Rome goodEvent cuts –I had not yet applied the updated pruning or background cuts The albedo gammas were a concern, but I was considering one solution

3 Progress Since Last Meeting After implementing ALL the cuts: goodCal, goodPSF, zdir_cut, bk_veto==0.0, and pruning, –the fraction of events vetoed by the filter drops from 3-8% to <4.3% at worst –the effective area drops I can explain where these vetoes come from, and I’m looking for solutions The albedo gammas are still the greatest challenge –The most obvious solution hurts events with low/no Cal deposit –The need to remove albedo gammas complicates potential fixes to the 4% gamma veto problem

4 The Cuts goodCal = "CalTotRLn>2&&CalEnergySum>5.0&&IMgoodCalProb> 0.2" goodPSF = "IMcoreProb>0.2&&IMpsfErrPred<3.0" zdir_cut = "Tkr1ZDir<-0.2" Background = “Bk_Veto==0.0” Pruning = "((AcdActiveDist 2)“** goodEvent = goodCal&&goodPSF&&zdir_cut All Cuts = goodEvent&&Background&&Pruning **From Bill’s DC1 talk. The online summary page of pruned files has Tkr1SSDVeto>1

5 Updated Cuts: The Effective Area and Fraction Vetoed Cuts Energy0- 100 MeV 100-500 MeV 500-1000 MeV 1-10 GeV10-180 GeV goodEventPk Aeff no Filt416910009108501091810134 FOV2.322.66722.752.662.50 Pk Aeff w/ Filt4019939410219103849731 FOV w/ Filt2.322.6362.682.5992.49 Filt damage %3.337.968.277.224.24 goodEventPk Aeff no Filt19438055103111068510090 && BackgroundFOV2.22.472.692.632.50 Pk Aeff w/ Filt194378519791102229680 FOV w/ Filt2.22.472.622.582.50 Filt damage %0.02.777.46.294.04 goodEventPk Aeff no Filt1943795710030102879412 && BackgroundFOV2.22.482.652.612.47 && PruningPk Aeff w/ Filt194377829770100249181 FOV w/ Filt2.22.472.602.5662.46 Filt damage %0.02.54.14.33.2 Last Time Updated

6 Reasons for Event Vetoes (by Energy Bin) 0-500 MeV (McEnergy) Veto 21: “zbottom,” no evidence of a track in the layers immediately above the Cal Vetoes 27 & 30: an ACD filter tile is hit, but little/no energy in the Cal. Filter tile means top two rows. Veto 17: no track found

7 500-1000 MeV Veto 21: zbottom again Veto 17: no track found Veto 30: ACD filter tile hit, but no energy in Cal Veto 18: track intersects a hit side ACD tile

8 1-10 GeV Veto 17: no track found Veto 21: zbottom Vetoes 24 & 25: triggered tower is shadowed by a hit ACD tile on the side or top Veto 29: Splash veto Veto 18, 19, 20: track intersects hit ACD tile on side or top Veto 30: ACD filter tile hit, but no energy in Cal

9 10-180 GeV Veto 17: no track found Vetoes 18, 19, 20: track intersects a hit ACD tile on the side or top Veto 21: zbottom Veto 24: triggered tower is shadowed by a hit ACD tile on the side

10 Summary of the Veto Problem Can be divided into two groups: 1 GeV –<1 GeV: zbottom is the big problem, along with the “no tracks” veto, and a tile hit with no associated energy –>1 GeV: no tracks, then splash related vetoes (a random tile hit is associated with a tower or a track), and zbottom again

11 The “no tracks” Veto These are caused by tracks that come in at an angle between 30-70 degrees from zenith, and cross tower boundaries –The Filter can only find tracks in individual towers, and boundary crossings often don’t provide enough layers to look at in any given tower McZDir

12 “no tracks” solution Two solutions (?) –Rewrite the Filter so that it can look across towers This is not a good option! –Remove or restrict the “no tracks” veto Minimal impact on the backgndavgpdr source, but must examine impact on the albedo_gamma_upwards source. –“no tracks” may be one of the more effective vetoes for these albedo gammas

13 The Other Vetoes Examining these one by one –They are more difficult to deal with than “no tracks” Looking at the impact on backgndavgpdr and albedo_gamma_upwards sources

14 The albedo_gamma_upwards source Last time, 135 Hz got through the filter If I reintroduce Veto 15* below 5 MeV, only 35 Hz gets through –The problem: this also eliminates the low energy gammas that don’t deposit in the Cal With the current “goodCal” selection, this has zero impact! But this could change, and onboard science may be impacted *(“no evidence of 2 tracks for events with E<350 MeV”)

15 Main Vetoes that Kill albedo_gamma_upward with the original Filter configuration (straight from JJ) Most Effective Vetoes Veto 15 (no 2-track evidence): 17.6% of vetoes Veto 16 (track into skirt region): 12.8% of vetoes Veto 17 (no track found): 19.8% of vetoes Log10(CalEnergySum) 90% of these albedo gammas are vetoed (blue line) 151617 Hard to see blue line, but most vetoes are at E=0

16 Vetoes that Kill albedo_gamma_upwards Using Filter Config I Introduced at the Last Meeting Log10(CalEnergySum) Only 50% vetoed! Why? To save low energy gammas, I had removed Veto 15, and restricted Veto 17 to E>250 MeV. One solution to albedo problem: allow veto 15 and/or 17 to enact when E==0, or E<5 MeV or so. Also consider removing Veto 21, which is bad for goodEvent gammas. Next: what happens when we start altering vetoes

17 Recovering Gammas It is clear from earlier slides that the no tracks veto (Veto 17), and the zbottom veto (Veto 21), are among the most damaging to goodEvent gammas Can we remove or restrict these? Restricting Veto 17 to E<5, and removing Veto 21 sends the backgndavgpdr rate to 570 Hz – no good! Just restricting 17, but leaving 21 as it is sends the backgndavgpdr rate to 360 Hz – much better. –This reduces the “Filter damage” by 44% above 1 GeV, and also helps a bit at low energy. Filter damage is reduced to <3% across all energy bins. However, this does not help with albedo gammas. The rate is still about 130 Hz.

18 Killing Albedo While Keeping goodEvents Recall that vetoes 15, 16, and 17 were most effective at killing albedo gammas in JJ’s original filter. –15 was removed, and 17 was restricted to E>250 MeV to recover low energy, non-albedo gammas –We are testing the restriction of 17 to E<5 What about restricting 15 to E<5 MeV? Answer: backgndavgpdr rate  304 Hz albedo_upwards rate  35 Hz Disadvantages: impact on onboard science? And throwing out gammas before they reach the ground. Total ~340 Hz

19 Is There Another Way? Vetoes 15, 16, and 17 are the only vetoes that are very effective at removing albedo gammas –Putting E<5 MeV restrictions on 15 and 17 is an effective way to eliminate albedo, while not harming “goodEvents” However, it is worth further study to see if the same goal can be accomplished without resorting to an energy cut –Perhaps a study of non-vetoed albedo in the event display will reveal something

20 Summary Applying all pruning, background, and goodEvent cuts, reduces the Filter damage to ~4% at max. The remaining vetoes are caused by a small number of Filter cuts – different reasons above and below 1 GeV Small changes to the Filter reduce the filter damage to less than 3%, and the total background flux goes down to ~340 Hz Although the method of killing albedo is simple and effective, there are disadvantages –It eliminates gammas before they are sent to the ground –It may impact onboard science that depends on gammas with no energy deposit In case this method is not acceptable, we are searching for alternatives


Download ppt "Onboard Filter Update Performance after updated cuts David Wren 26 January 2004."

Similar presentations


Ads by Google