1. MICROECONOMICS: Theory & Applications Chapter 7 Production By Edgar K. Browning & Mark A. Zupan John Wiley & Sons, Inc. 9 th Edition, copyright 2006 PowerPoint prepared by Della L. Sue, Marist College

2. Copyright 2006 John Wiley & Sons, Inc. 7-2 Learning Objectives Establish the relationship between inputs and output. Distinguish between variable and fixed inputs. Define total, average, and marginal product. Understand the Law of Diminishing Marginal Returns. (Continued)

3. Copyright 2006 John Wiley & Sons, Inc. 7-3 Learning Objectives (continued) Investigate the ability of a firm to vary its output in the long run when all inputs are variable. Explore returns to scale: how a firm’s output response is affected by a proportionate change in all inputs. Overview how production relationships can be estimated and some difference potential functional forms for those relationships.

4. Copyright 2006 John Wiley & Sons, Inc. 7-4 Relating Output to Inputs Factors of production – inputs or ingredients mixed together by a firm through its technology to produce output Production function – a relationship between inputs and output that identifies the maximum output that can be produced per time period by each specific combination of inputs Q = f(L,K) Technologically efficient – a condition in which the firm produces the maximum output from any given combination of labor and capital inputs

5. Copyright 2006 John Wiley & Sons, Inc. 7-5 Production When Only One Input is Variable: The Short Run Fixed inputs - resources a firm cannot feasibly vary over the time period involved Total product - the total output of the firm Average product - the total output divided by the amount of the input used to produce that output Marginal product - the change in total output that results from a one-unit change in the amount of an input, holding the quantities of other inputs constant

6. Copyright 2006 John Wiley & Sons, Inc. 7-6 Total, Average, and Marginal Product Curves [Figure 7.1]

7. Copyright 2006 John Wiley & Sons, Inc. 7-7 The Relationship Between Average and Marginal Product Curves When the marginal product is greater than average product, average product must be increasing. When the marginal product is less than average product, average product must be decreasing. When the marginal and average products are equal, average product is at a maximum.

8. Copyright 2006 John Wiley & Sons, Inc. 7-8 The Geometry of Product Curves [Figure 7.2]

9. Copyright 2006 John Wiley & Sons, Inc. 7-9 The Law of Diminishing Marginal Returns A relationship between output and input that holds that as the amount of some input is increased in equal increments, while technology and other inputs are held constant, the resulting increments in output will decrease in magnitude

10. Copyright 2006 John Wiley & Sons, Inc. 7-10 Production When All Inputs Are Variable: The Long Run Short run – a period of time in which changing the employment levels of some inputs is impractical Long run – a period of time in which the firm can vary all its inputs Variable inputs – all inputs in the long run

11. Copyright 2006 John Wiley & Sons, Inc. 7-11 Production Isoquants Isoquant – a curve that shows all the combinations of inputs that, when used in a technologically efficient way, will produce a certain level of output Characteristics: –Isoquants must slope downward as long as both input are productive (I.e., marginal products > 0) –Isoquants lying farther to the northeast identify greater levels of output –Two isoquants can never intersect. –Isoquants will generally be convex to the origin.

12. Copyright 2006 John Wiley & Sons, Inc. 7-12 Marginal Rate of Technical Substitution (MRTS) The amount by which one input can be reduced without changing output when there is a small (unit) increase in the amount of another input When the MRTS diminishes along an isoquant, the isoquant is convex.

13. Copyright 2006 John Wiley & Sons, Inc. 7-13 Production Isoquants [Figure 7.3]

14. Copyright 2006 John Wiley & Sons, Inc. 7-14 MRTS and the Marginal Products of Inputs MRTS LK = (-) ΔK/ΔL = MP L /MP K

15. Copyright 2006 John Wiley & Sons, Inc. 7-15 Returns to Scale Constant returns to scale – a situation in which a proportional increase in all inputs increases output in the same proportion Increasing returns to scale – a situation in which output increases in greater proportion than input use Decreasing returns to scale – a situation in which output increases less than proportionally to input use Figure 7.5

16. Copyright 2006 John Wiley & Sons, Inc. 7-16 Factors Giving Rise to Increasing Returns Specialization and division of labor “Volume” capacity increases faster than “area” dimensions (arithmetic relationship) Available of techniques that are unique to large-scale operation

17. Copyright 2006 John Wiley & Sons, Inc. 7-17 Factors Giving Rise to Decreasing Returns Inefficiency of managing large operations: –Coordination and control become difficult –Loss or distortion of information –Complexity of communication channels –More time is required to make and implement decisions

18. Copyright 2006 John Wiley & Sons, Inc. 7-18 Functional Forms and Empirical Estimation of Production Functions Functional Forms –Linear Q = a + bL + cK –Multiplicative Cobb-Douglas production function: Q = aL b K c Empirical Estimation Techniques –Survey –Regression analysis

19. Copyright 2006 John Wiley & Sons, Inc. 7-19 Copyright 2006 John Wiley & Sons, Inc. All rights reserved. Reproduction or translation of this work beyond that permitted in section 117 of the 1976 United States Copyright Act without express permission of the copyright owner is unlawful. Request for further information should be addressed to the Permissions Department, John Wiley & Sons, Inc. The purchaser may make back-up copies for his/her own use only and not for distribution or resale. The Publisher assumes no responsibility for errors, omissions, or damages caused by the use of these programs or from the use of the information herein.