1. Modularisation II Lecture 9

2. Communication between modules Also known as intermodule communication. The fewer and the simpler the communications, the easier it is to understand and maintain. Be accomplished by the scope of variable (local or global data) or passing parameter

3. Scope of variable Global data  –data can be used by all modules in a program –scope of variable is the whole program –The lifetime spans the execution of the whole program Local data  –Can only be used by the module in which it is defined –Scope of variable is the module itself –The lifetime is limited to the execution of the single subroutine in which it is defined. –Can reduce program side effects.

4. Side effects Form of cross-communication of a module with other parts of a program. Occurs when a subordinate module alters the value of a global variable inside a module. Tend to decrease the manageability of a program.

5. Passing parameters Efficient method of intermodule communication Data items transferrred from a calling module to its subordinate module at the time of calling. When the subordinate module terminates and return the control, the values in parameters are transfered back to the calling module. Avoids unwanted side effects Example : Print_page_headings(page_count, line_count)

6. Formal and actual parameters Formal parameters: parameter that appear when a submodule is defined Actual parameters: variable and expression that are passed to a submodule in a particular call. Example: –In mainline call: Print_page_headings(page_count, line_count) –while in module have been declared as: Print_page_headings(page_counter, line_counter)

7. Example 8.3 Increment two counter (illustrates the use of formal and actual parameters) Design an algorithm that will increment two counters from 1 to 10 and then output those counters to the screen. Your program is to use a module to increment the counters.

8. Defining diagram InputProcessingOutput Counter_1 Counter_2 Increment counters Output counters Counter1 counter2

9. Solution Algorithm Increment_two_counters Set counter1, counter2 to zero DO I = 1 to 10 increment_counter(counter1) increment_counter(counter2) Output to the screen counter1, counter2 ENDDO END Increment_counter(counter) counter = counter + 1 END Actual parameter Formal parameter

10. Hierarchy charts and parameters For data parameters: Contain the actual variables or Data items that will be passed For status parameters act as Program flag or switches (T/F)

11. Example 8.4 Process three characters (Using parameter in program design) Design a solution algorithm that will prompt a terminal operator for three characters, accept those characters as input, sort them into ascending sequence and output them to the screen. The algorithm is to continue to read characters until ´XXX`is entered.

12. Defining diagram InputProcessingOutput Char_1 Char_2 Char_3 Prompt for characters Accept three characters Sort three characters Output three characters Char_1 Char_2 Char_3

13. Group the activities into modules A module will be created for each processing step in the defining diagram.

14. Hierarchy chart Process_three_ characters Print_three_ characters Sort_three_ characters Read_three_ characters Char_1, char_2. Char_3

15. Solution Algorithm Process_three_characters Read_three_characters(char_1,char_2, char_3) DOWHILE NOT (char_1=´X`AND char_2=´X´AND char_3=´X`) sort_three_characters(char_1,char_2,char_3) Print_three_characters(char_1,char_2,char_3) Read_three_characters(char_1,char_2,char_3) ENDDO END Read_three_characters(char_1,char_2,char_3) Prompt the operator for char_1,char_2, char_3 Get chat_1, char_2, char_3 END

16. Solution Algorithm (cont`) Sort_three_characters(char_1,char_2,char_3) IF char_1>char_2 THEN temp = char_1 char_1 = char_2 char_2 = temp ENDIF IF char_2>char_3 THEN temp = char_2 char_2 = char_3 char_3 = temp ENDIF IF char_1>char_2 THEN temp = char_1 char_1 = char_2 char_2 = temp ENDIF END Print_three_characters(char_1,char_2,char_3) Output to the screen char_1, char_2, char_3 END

17. Further modularisation Process_three_characters Read_three_characters(char_1,char_2, char_3) DOWHILE NOT (char_1=´X`AND char_2=´X´AND char_3=´X`) sort_three_characters(char_1,char_2,char_3) Print_three_characters(char_1,char_2,char_3) Read_three_characters(char_1,char_2,char_3) ENDDO END Read_three_characters(char_1,char_2,char_3) Prompt the operator for char_1,char_2, char_3 Get chat_1, char_2, char_3 END Sort_three_characters(char_1,char_2,char_3) IF char_1>char_2 THEN Swap_two_characters(char_1,char_2) ENDIF IF char_2>char_3 THEN Swap_two_characters(char_2,char_3) ENDIF IF char_1>char_2 THEN Swap_two_characters(char_1,char_2) ENDIF END

18. Further modularisation (cont`) Print_three_characters(char_1,char_2,char_3) Output to the screen char_1, char_2, char_3 END Swap_two_characters(first_char, second_char) temp = first_char first_char = second_char second_char = temp END

19. Hierarchy chart Process_three_ characters Print_three_ characters Sort_three_ characters Read_three_ characters Swap_two_ characters

20. Steps in modularisation 1.Define the problem by dividing it into its three components 2.Group the activities into subtasks or functions 3.Construct the hierarchy chart 4.Establish the logic of the mainline of the algorithm 5.Develop the pseudocode 6.Desk check the solution algorithm

21. Example 8.5 Calculate Employee‘s pay A program is required by a company to read an employee‘s number, pay rate and the number of hours worked in a week. The program is then to validate the pay rate and the hours worked fields and, if valid, compute the employee‘s weekly pay and print it along with the input data.

22. Example 8.5 (cont‘) Validation: According to the company‘s rules, the maximum hours an emplooye can work per week is 60 hours, and the maximum hourly rate is $25.00 per hour. If the hours worked field or the hourly rate field is out of range, the input data and an appropriate message is to be printed and the emplooye‘s weekly pay is not to be calculated. Weekly pay calculation: Weekly pay is calculated as hours worked times pay rate. If more than 35 hours are worked, payment for the overtime hours worked is calculated at time-and half.

23. Defining diagram InputProcessingOutput Emp_no Pay_rate Hrs_worked Read employee details Validate input fields Calculate employee pay Print employee details Emp_no Pay_rate Hrs_worked Emp_weekly_pay Error_message

24. Group the activities into modules Each of the processing steps in the defining diagram will become a module in the algorithm.

25. Hierarchy chart Compute_employee_pay Calculate_ Employee_pay Validate_input_ fields Read_employee_ details Employee_details Print_employee_ details Valid_input_ fields

26. Establish the logic of the mainline of the algorithm using pseudocode Compute_employee_pay 1Read_employee_details (employee_details) 2DOWHILE more records 3Validate_input_fields(employee_details, valid_input_fields) IF valid_input_fields THEN Calculate_employee_pay (employee_details) Print_employee_details (employee_details) ENDIF 5Read_employee_details (employee_details) ENDDO END

27. Develop the pseudocode for each successive module in the hierarchy chart Read_employee_details (employee_details) 6 Read emp_no, pay_rate, hrs_worked END Validate_input_fields (employee_details, valid_input_fields) 7 set_valid_input_fields to true 8 set error_message to blank 9 IF pay_rate> $25 THEN error_message = ´Pay rate exceeds $25 `Print_emp_no, pay_rate, hrs_worked, error_message valid_input_fields = false ENDIF 10 IF hrs_worked > 60 THEN error_message = ´Hours worked exceed 60` Print_emp_no, pay_rate, hrs_worked, error_message valid_input_fields = false ENDIF END Calculate_employee_pay(employee_details) 11 IF hrs_worked <= 35 THEN emp_weekly_pay = pay_rate * hrs_worked ELSE overtime_hrs = hrs_worked – 35 overtime_pay = overtime_hrs * pay_rate * 1.5 emp_weekly_pay = (pay_rate * 35) + overtime_pay ENDIF END Print_employee_details (employee_details) Print_emp_no, pay_rate_hrs_worked, emp_weekly_pay END

28. Desk Checking 1.Input data: RecordPay_rateHrs_worked Employee 1$20.0035 Employee 2$20.0040 Employee 3$50.0065 EOF

29. 2. Expected result: Employee 1 Employee 2 Employee 3 $20.00 $50.00 35 40 65 $700.00 850.00 300 minutes Pay rate exceeds $25.00 Hours worked exceeds 60

30. Desk Check Table Statement number Valid_input_f ields Pay_rateHrs_workedDOWHILE condition Error_messageEmp_weekly_ pay Ovt_hrsOvt_pay 1,6$20.0035 2True 3, 7-10trueBlank 4 11$700 12print Print 5,6$20.0040 2True 3, 7-10trueBlank 4 11$8505$150 12printPrintprint 5,6$50.0065 2True 3,7,8Trueblank 9falseprint Pay rate exceeds $25 10falseprint Hours worked exceeds 60 4 5,6EOF 2false

31. Homework: Product orders report The Gatec Company wants to produce a product orders report from its product orders file. Each record on the file contains the product number of the item ordered, the product description, the number of units ordered, the retail price per unit, the freight charges per unit, and the packaging costs per unit Your algorithm is to read the product orders file, calculate the total amount due for each product ordered and print these details on the product orders report. The amount due for each product is calculated as the product of the number of units ordered and the retail price of the unit. A discount of 10% is allowed on the amount due for all orders over $100.00. The freight charges and packaging costs per unit must be added to this resulting value to determine the total amount due.

32. The output report is to contain headings and column headings as specified in the following chart: GATEC ORDERS REPORT PAGE XX PRODUCT NO PRODUCT DESCRIPTION UNITS ORDERED TOTAL AMOUNT DUE XxxxXxxxxxxxxxxxxxxXxxXxxxx XxxxXxxxxxxxxxxxxxxXxxXxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx Each detail line is to contain the product number, product description, number of units ordered and the total amount due for the order. There is to be an allowance of 45 detail line per page.