1. Raphael Finished and ordered the MCA PCB!

2. Dan Working on the UV PCB Determined an appropriate resistor value Read over Chen’s python code Estimated wavelength: 300 nm Expected power:.1 to 50 mW 500-ish ohms Highest expected flux causes the meter to almost rail

3. Sam Tested USB transfer Helping Chen with getting the data to the GUI

4. Main Host Application USB Client USBDriver 1.Instantiates client 2.Instantiates queue ---Processes queue ---Loads queue (loop) Processes queue (loop) 1.Waits for buffer 2.Turns part of buffer into a packet 3.Reads the type of packet and uses packet to fill in a certain part of the histogram Chen Working on getting the queue to communicate with the GUI Main Window 1.Sets up GUI window 2.Makes histogram HistogramUpdate (loop) 1.Draws events 2.Changes scale HistogramFiller (loop) 1.Link with protocol output 2.Add/update events