1. Външно оценяване
по математика 5 клас г
АКЦЕНТИ

2. Custom animation effects: page turns in open book (Difficult)
От обобщената информация могат да се направят редица изводи, включително и кои теми затрудняват учениците, кой е бил най-лесният и най-трудният въпрос и др.
Осигурена е равнопоставеност на всички ученици от V клас с помощта на стандартизиран тест и процедура за оценяване, която
гарантира оценяването на всички ученици по единни критерии и дава възможност за точно диагностициране и обективен анализ на допуснатите грешки и на пропуските в знанията им
Във външното оценяване участваха петокласници от 89 училища в града и окръга.
Начин на проверка: тест, обхващащ задължителният минимум от знания и умения по математика. Задачите се решават основно пряко, с приложение на теорията непосредствено и по-малка част с допълнително преобразувание. Равнищата са възпроизвеждане, разбиране, приложение.
Custom animation effects: page turns in open book
(Difficult)
Tip: You will need to use drawing guides and the ruler to position the objects on this slide. For instructions on animating an opening book cover, refer to the previous slide (Custom animation effects: open book) for instructions.
To display the drawing guides and the ruler, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Right-click the slide background area, and then click Grid and Guides. In the Grid and Guides dialog box, under Guide settings, select Display drawing guides on screen. (Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. The spine of the book will be aligned to the vertical drawing guide.)
On the View tab, in the Show/Hide group, select Ruler.
To reproduce the first shape in the Inside-left page 1 group on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rounded Rectangle (second option from the left). On the slide, drag to draw a rounded rectangle.
Select the rounded rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:
In the Shape Height box, enter 4.5”.
In the Shape Width box, enter 3.33”.
On the rounded rectangle, drag the yellow diamond adjustment handle to the left to reduce the amount of rounding on the corners.
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Linear.
Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).
In the Angle box, enter 180°.
Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.
Also under Gradient stops, customize the gradient stops that you added as follows:
Select Stop 1 from the list, and then do the following:
In the Stop position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 50% (sixth row, sixth option from the left).
Select Stop 2 from the list, and then do the following:
In the Stop position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Red Accent 2, Darker 25% (fifth row, sixth option from the left).
Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select No line.
On the slide, drag the rectangle until the right edge is against the vertical drawing guide.
On the Home, tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
To reproduce the second shape in the Inside-left page 1 group on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:
In the Shape Height box, enter 4.33”.
In the Shape Width box, enter 3.15”.
Under Gradient stops, click Add or Remove until five stops appear in the drop-down list.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, the first option from the left).
In the Stop position box, enter 5%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Select Stop 3 from the list, and then do the following:
In the Stop position box, enter 18%.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 5% (second row, first option from the left).
Select Stop 4 from the list, and then do the following:
In the Stop position box, enter 38%.
Select Stop 5 from the list, and then do the following:
In the Stop position box, enter 93%.
Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer click Offset Right (second row, first option from the left), and then do the following:
In the Transparency box, enter 60%.
In the Size box, enter 100%.
In the Blur box, enter 4 pt.
In the Angle box, enter 0°.
In the Distance box, enter 3 pt.
On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
On the Home tab, in the Editing group, click Select and then click Select All. On the Home tab, in the Drawing group, click Arrange, and then click Group.
On the Home tab, in the Editing group, click Select, and then click Selection Pane.
In the Selection and Visibility pane, double-click the group to edit the name, and then enter Inside-left page 1.
To reproduce the first shape in the Inside-right page 3 group on this slide, do the following:
On the Selection and Visibility pane, select the Inside-left page 1 group.
On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.
On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.
On the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-right.
On the slide, drag the Inside-right group until the left edge is against the vertical drawing guide.
To reproduce the text box in the Inside-right page 3 group on this slide, do the following:
On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw the text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, select Bodoni MT Condensed.
In the Font Size list, select 16.
Drag the text box onto the right-side page to the right of the vertical drawing guide.
If the text is wider than the page, drag the adjustment handles on the text box to decrease the width, and then repeat the previous step to reposition.
To reproduce the page edges in the Inside-right page 3 group on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left).
On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line.
Select the vertical line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 4.32”.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Outline, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process until there is a total of six lines.
On the slide, drag the lines until they are bunched together in a dense group, no wider than 0.5”.
In the Selection and Visibility pane, press and hold CTRL, and then select the six straight connectors (lines).
On the Home tab, in the Drawing group, click Arrange, and then do the following:
Point to Align, and then click Align Selected Objects.
Point to Align, and then click Distribute Horizontally.
Point to Align, and then click Align Middle.
Click Group.
On the slide, drag the group of lines until the right edge is touching the right edge of the white rectangle to the right of the vertical drawing guide.
In the Selection and Visibility pane, press and hold CTRL, and then select the group of lines, the text box, and the Inside-right group.
On the Home tab, in the Drawing group, click Arrange, and then click Group.
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right page 3.
To reproduce the first shape in the Inside-left page 2 group on this slide, do the following:
Under Drawing Tools, on the Format tab, in the Size group, do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).
On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:
To reproduce the page edge in the Inside-left page 2 group on this slide, do the following:
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Outline, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
On the slide, drag the line near the edge of the left-side page (white rectangle to the left of the vertical drawing guide).
In the Selection and Visibility pane, press and hold CTRL, and then select the rectangle and the straight connector (line).
On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-left page 2.
To reproduce the first shape in the Inside-right page 2 group on this slide, do the following:
In the Selection and Visibility pane, select the Inside-left page 2 group.
With the duplicate group still selected, on the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.
In the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-right.
In the Selection and Visibility pane, select the new Inside-right group. On the slide, drag the selected group until the left edge is against the vertical drawing guide.
On the Home, tab, in the Drawing group, click Arrange, point to Align, and then do the following:
On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert.
On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. Select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 1.4” and the Width box is set to 2.1”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.
On the slide, drag the picture until the left edge is 0.5” to the right of the vertical drawing guide and the bottom edge is 0.5” above the horizontal drawing guide.
To reproduce the text box in the Inside-right page 2 group on this slide, do the following:
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
On the slide, drag the text box until the left edge of the text is 0.5” to the right of the vertical drawing guide and the top edge of the text is against the horizontal drawing guide.
If the text is too wide for the page, drag the adjustment handles on the text box to adjust the width, and then repeat the previous step to reposition.
To reproduce the page edges in the Inside-right page 2 group on this slide, do the following:
In the Selection and Visibility pane, select the Inside-right group you just created. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.
In the Selection and Visibility pane, select the straight connector (line) that you just ungrouped from the page. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process for a total of six lines.
On the slide, drag the six lines until they are bunched together in a dense group, no wider than 0.5”.
In the Selection and Visibility pane, press and hold CTRL, and then select the six straight connectors (lines). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Distribute Horizontally.
With the group of lines still selected, on the Home tab, in the Drawing group, click Arrange, and then click Group.
On the slide, drag the group until the right edge of the group of lines is touching the right edge of the page.
In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines and the rectangle. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
Also in the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right.
Also in the Selection and Visibility pane, press and hold CTRL, and then select the Inside-right group, the text box, and the picture. On the Home tab, in the Drawing group, click Arrange, and then click Group.
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right page 2.
To reproduce the first shape in the Inside-left page 3 group, do the following:
In the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-left.
To reproduce the picture in the Inside-left page 3 group, do the following:
On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 1.4” and the Width box is set to 2.1”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.
On the slide, drag the picture until the left edge is 0.5” to the right of the vertical drawing guide and the top edge is 0.25” below the horizontal drawing guide.
To reproduce the text box in the Inside-left page 3 group, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.
On the slide, drag the text box until the right edge of the text is 0.5” to the left of the vertical drawing guide and the bottom edge of the text is 0.25” above the horizontal drawing guide.
If the text is too wide for the page, drag the adjustment handles on the text box to decrease the width, and then repeat the previous step to reposition.
To reproduce the page edges in the Inside-left page 3 group, do the following:
In the Selection and Visibility pane, select the Inside-left group you just created. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.
In the Selection and Visibility pane, select the straight connector (line) that you just ungrouped from the page. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.
On the slide, drag the duplicate line until it is very close to the original line.
In the Selection and Visibility pane, press and hold CTRL, and then select the two straight connectors (lines). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
On the slide, drag the group until the left edge of the group of lines is touching the left edge of the rectangle.
In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines, the rectangle, the text box, and the picture. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
Also in the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-left page 3.
To reproduce the first shape in the Inside-right page 1 group on this slide, do the following:
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right.
In the Selection and Visibility pane, select the Inside-right group. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.
On the slide, drag the group until the left edge is against the vertical drawing guide.
To reproduce the text box in the Inside-right page 1 group on this slide, do the following:
On the Insert tab, in the Text group, click Text Box. Drag to draw a text box on the slide.
Enter text in the text box (to match the example above, enter Introduction), and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, select Vivaldi.
In the Font Size list, select 18.
On the Home tab, in the Paragraph group, click Center to center the text in the text box.
On the slide, drag the text box until the left edge of the text is 0.75” to the right of the vertical drawing guide and the bottom edge of the text is 0.5” above the horizontal drawing guide.
To reproduce the page edges in the Inside-right page 1 group on this slide, do the following:
In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines, the rectangle, and the text box. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
Also in the Selection and Visibility pane, press and hold CTRL, double-click the new group to edit the name, and then enter Inside-right page 1.
Right-click the slide background area, and then click Grid and Guides. In the Grid and Guides dialog box, under Guide settings, clear Display drawing guides on screen.
On the View tab, in the Show/Hide group, clear Ruler.
In the Selection and Visibility pane, the final arrangement of the six groups of objects should be the following (from top to bottom):
Inside-right page 1
Inside-left page 3
Inside-right page 2
Inside-left page 2
Inside-right page 3
Inside-left page 1
To move a group of objects up in the Selection and Visibility pane, do the following:
In the Selection and Visibility pane, select the group of objects.
On the Home tab, in the Drawing group, click Arrange, and then click Bring Forward.
To move a group of objects down in the Selection and Visibility pane, do the following:
On the Home tab, in the Drawing group, click Arrange, and then click Send Backward.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Animations group, click Custom Animation.
In the Selection and Visibility pane, select the Inside-right page 1 group. In the Custom Animation task pane, do the following:
Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Moderate, click Collapse.
Select the first animation effect (collapse effect for the Inside-right page 1 group). Under Modify: Collapse, do the following:
In the Start list, select With Previous.
In the Direction list, select To Left.
In the Speed list, select Fast.
In the Selection and Visibility pane, select the Inside-left page 2 group. In the Custom Animation task pane, do the following:
Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Moderate, click Stretch.
Select the second animation effect (stretch effect for the Inside-left page 2 group). Under Modify: Stretch, do the following:
In the Start list, select After Previous.
In the Direction list, select From Right.
In the Selection and Visibility pane, select the Inside-right page 2 group. In the Custom Animation task pane, do the following:
Select the third animation effect (collapse effect for the Inside-right page 2 group). Under Modify: Collapse, do the following:
In the Start list, select On Click.
In the Selection and Visibility pane, select the Inside-left page 3 group. In the Custom Animation task pane, do the following:
Select the fourth animation effect (stretch effect for the Inside-left page 3 group). Under Modify: Stretch, do the following:
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Click the button next to Direction, and then click Linear Down (first row, second option from the left).
In the Stop position box, enter 63%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, fifth option from the left).

3. Р е з у л т т и

5. А Г 20 5 65,76 %  16,44 точки ( 16 – 19) Много добър (Difficult)
Custom animation effects: tipping scales
(Difficult)
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes select Oval (first row, second option from the left). Press and hold SHIFT and on the slide, drag to draw a circle.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group, do the following:
In the Shape Width box, enter 2.16”.
In the Shape Height box, enter 2.16”.
With the oval still selected, on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane, do the following:
Also in the Format Shape dialog box, click Line Color in the left pane, and in the Line Color pane, click No line.
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left).
Select Solid fill.
Also in the Format Shape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, do the following:
Under Depth, in the Depth box, enter 3.5 pt.
Next to the Top list, in the Width box, enter 5.5 pt, and in the Height box, enter 9.5 pt.
Under Bevel, in the Top list, under Bevel, select Angle (second row, first option from the left).
Also in the Format Shape dialog box, click 3-D Rotation in the left pane, and in the 3-D Rotation pane, under Rotation, do the following:
In the Z box, enter 65.2°.
In the Y box, enter 298.9°.
In the X box, enter 297.8°.
Also in the Format Shape dialog box, click Shadow in the left pane, and in the Shadow pane, do the following:
In the Blur box, enter 15 pt.
In the Size box, enter 105%.
In the Transparency box, enter 60%.
In the Angle box, enter 120°.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles select Rounded Rectangle (second option from the left). On the slide, drag to draw a rounded rectangle.
Drag the circle to the bottom of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align and then select Align Center.
In the Distance box, enter 9 pt.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Height box, enter 4.2”, and in the Shape Width box, enter 0.18”.
Drag the yellow diamond adjustment handle to the right to create a rounded top.
In the Format Shape dialog box, in the left pane, click Fill, and in the Fill pane, do the following:
On the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
Click Solid fill.
Also in the Format Shape dialog box, in the left pane, click 3-D Format, and in the 3-D Format pane, do the following:
Also in the Format Shape dialog box, in the left pane, click Line Color, and in the Line Color pane, click No line.
In the Color list, under Theme Colors, select White, Background 1, Darker 15% (third row, first option from the left).
Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).
Select the rounded rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select Align Center.
Position the bottom of rectangle so that it slightly overlaps the oval.
Next to the Top list, in the Width box, enter 10 pt, and in the Height box, enter 10 pt.
Select the second rounded rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:
With the rounded rectangle still selected, on the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.
In the Shape Width box, enter 0.13”.
In the Shape Height box, enter 4.35”.
With the second rounded rectangle still selected, on the Home tab, in the Drawing group, click Arrange, point to Rotate, and select Rotate Left 90°.
Select the first (vertical) round rectangle. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.
Select the second (horizontal) round rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select Align Center.
Position the second (horizontal) round rectangle so that it slightly overlaps the top of the first, vertical round rectangle.
Select the third (vertical) rounded rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:
Position the third, smaller round rectangle at the intersection at the top of the first (vertical) and second (horizontal) round rectangles.
In the Shape Width box, enter 0.32”.
In the Shape Height box, enter 0.32”.
Select the third, smaller round rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select Align Center.
Select the second oval. Under Drawing Tools, on the Format tab, in the Size group, do the following:
Select the oval. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.
Press and hold SHIFT and select the second (horizontal) and third (smaller) round rectangles. On the Home tab, in the Drawing group, click Arrange, and select Group.
In the Shape Height box, enter 1.93”.
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following:
In the Shape Width box, enter 1.93”.
Also in the Format Shape dialog box, click Shadow in the left pane, and in the Shadow pane, in the Presets list, select No Shadow.
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 15% (third row, first option from the left).
Next to the Top list, in the Width box, enter 5.5 pt, and in the Height box, enter 5 pt.
Under Bevel, in the Top list, under Bevel, select Slope (second row, fourth option from the left).
Next to the Bottom list, in the Width box, enter 11 pt, and in the Height box, enter 5 pt.
Under Bevel, in the Bottom list, under Bevel, select Angle (second row, first option from the left).
In the X box, enter 287.8°.
Position this oval (or dish) on the left side of the slide, approximately 2.5 inches below the horizontal round rectangle
In the Z box, enter 74.1°.
In the Y box, enter 297.1°.
Select the line. On the Home tab, in bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and in the Line Color pane do the following:
On the Home tab, in the Drawing group, click Shapes, and under Lines select Line (first option from the left). On the slide, drag to draw a line from the left edge of the horizontal rectangle to the bottom left edge of the dish.
Click Solid line.
Also in the Format Shape dialog box, click Line Style in the left pane, and in the Line Style pane do the following:
In the Width box, enter 3.75 pt.
In the Join type list, select Round.
In the Cap type list, select Round.
In the Dash type list, select Round Dot (second option).
Select the line. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.
On the Home tab, in the Drawing group, click Arrange, and then select Send to Back.
Position the duplicate line so the top point is at the same position as the top point on the first line. Position the endpoint on the right edge of the dish.
Select the second line. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and select Flip Horizontal.
Position the second group on the right side of the slide.
Select the group (the two dotted lines and the dish). On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.
Press and hold CTRL and select both lines and the dish. On the Home tab, in the Drawing group, click Arrange, and select Group.
Press and hold CTRL and select both left and right groups. On the Home tab, in the Drawing group, click Arrange, and then do the following:
Point to Align, and select Align Selected Objects.
Select Send to Back.
Point to Align, and select Align Top.
To reproduce the animation effects on this slide, do the following:
In the Custom Animation task pane, select the animation effect, and then under Modify: Spin, do the following:
In the Custom Animation task pane, click Add Effect, point to Emphasis and select More Effects. In the Add Emphasis Effect dialog box, under Basic, select Spin, and then click OK.
Select top horizontal bar group. On the Animations tab, in the Animations group, click Custom Animations.
In the Amount list, in the Custom box, enter 10, and then press ENTER. Also in the Amount list, select Clockwise.
In the Start list, select With Previous.
In the Speed list, select Fast.
Select the left dish group. In the Custom Animation task pane, click Add Effect, point to Motion Paths, and select Up.
Click OK.
In the Custom Animation task pane, select the Up motion path, and then under Modify: Up, do the following:
In the Custom Animation task pane, select the Up motion path effect. On the slide, press and hold the SHIFT key and drag the endpoint (red arrow) down to shorten the motion path to approximately .33” in length. (Note: If needed, zoom in to see the objects. On the View tab, in the Zoom group, click Zoom, and in the Zoom dialog box, in the Percent box enter 200%. After editing, on the View tab, in the Zoom group, click Fit to Window to return to the slide to its original size.)
In the Custom Animation task pane, click the arrow to the right of the Up motion path and select Effect Options. In the Up dialog box, on the Effect tab, under Settings, clear both Smooth Start and Smooth End and then click OK.
Select right dish group. In the Custom Animation task pane, click the arrow next to Add Effect, point to Motion Paths, and select Down.
In the Custom Animation task pane, select the Down motion path, and then under Modify: Down, do the following:
In the Custom Animation task pane, select the Down motion path. On the slide, press and hold SHIFT and drag the endpoint (red arrow) up to shorten the path to approximately .33” in length.
In the Custom Animation task pane, click the arrow next to the Down motion path and select Effect Options. In the Down dialog box, on the Effect tab, under Settings, clear Smooth Start, clear Smooth End, and then click OK.
In the Custom Animation task pane, select the second Spin animation effect, and then under Modify: Spin do the following:
Select the top horizontal bar group. In the Custom Animation task pane, click the arrow next to Add Effect, point to Emphasis, and select More Effects. In the Add Emphasis Effect dialog box, under Basic, select Spin, and then click OK.
In the Amount list, in the Custom box, enter 20°, and then press ENTER. Also in the Amount list, select Counterclockwise.
In the Start list, select On Click.
Select the left dish group. In the Custom Animation task pane, click Add Effect, point to Motion Paths, and select Down.
In the Custom Animation task pane, select the Down motion path for the right dish. On the slide, press and hold SHIFT and drag the starting point (green arrow) to meet the endpoint (red arrow) from the first up motion path. (Note: If needed, zoom in to see the objects. On the View tab, in the Zoom group, click Zoom, and in the Zoom dialog box, in the Percent box, enter 200%. After editing, on the View tab, in the Zoom group, click Fit to Window to return to the slide to its original size.)
On the slide, select the down motion path for the left dish and then drag the endpoint (red arrow) up to shorten the path to approximately .66” in length.
In the Custom Animation task pane, click the arrow next to the down motion path for the left dish, and then select Effect Options. In the Down dialog box, on the Effect tab, under Settings, clear Smooth Start and Smooth End, and then click OK.
Select the right dish group. In the Custom Animation task pane, click Add Effect, point to Motion Path, and select Up.
In the Custom Animation task pane, select the Up motion path for the right dish, and then under Modify: Up, do the following:
In the Custom Animation task pane, select the Up motion path for the right dish. On the slide, press and hold SHIFT and drag the starting point (green arrow) to meet the endpoint (red arrow) from the first down motion path.
On the slide, select the up motion path for the right dish, and then drag the endpoint (red arrow) up to shorten the path to approximately .66” in length.
In the Custom Animation task pane, click the arrow next to the up motion path for the right dish and select Effect Options. In the Up dialog box, on the Effect tab, under Settings, clear Smooth Start and Smooth End, and then click OK.
To reproduce the background effects on this slide, do the following:
In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:
Right-click the slide background area, and then click Format Background.
Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.
In the Direction list, click Linear Down (first row, second option from the left).
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select Stop 1 from the list, and then do the following:
Click the button next to Color, and then click under Theme Colors select White, Background 1 (first row, the first option from the left).
In the Stop position box, enter 65%.
Select Stop 2 from the list, and then do the following:
Click the button next to Color, and then click under Theme Colors select Black, Text 1, Lighter 50% (second row, the second option from the left).
In the Stop position box, enter 96%.
65,76 %  16,44 точки ( 16 – 19) Много добър

6. 5 задача 83,75% ( максимален резултат) изваждане на обикновени дроби с различни знаменатели

7. а) 72,4 (15,92%) б) 120 (39,92% ) в) 180 (35,07% ) г) 190 (5,04 %)
25 задача 39.92% ( минимален резултат) Автобус изминал от разстоянието между два града и му останали
още 72 км. Колко километра е това разстояние?
а) 72,4 (15,92%) б) (39,92% ) в) (35,07% ) г) (5,04 %)
Съществува проблем при съставянето математически модел на текстова задача, свързана с път, част от число, не се разбира сравнението”останали още”.
35,07% от учениците посочват, че разстоянието е 180 км.

8. Четене на десетична дроб
1 задача: Числото 3,805 се чете:
а) 3 цяло и 805 хиляди (9,06%)
б) 3 цяло и 805 десети (2,65 %)
в) 3 цяло и 805 хилядни
( 80,46 %)
г) 3 цяло и 805 стотни (7,40%)
Смесват се понятията
при четене на дробните
разредни единици (20%) .

9. 2 задача: Кое от числата е най- голямо?
а) б) в) г)
-0,70% А) 60,13% Б) 8,82% В) 2,52% Г) 27,83%
28 % от учениците не владеят изобразяване на правилните и неправилните дроби върху числовата ос;
40 % не могат да сравнят обикновени дроби с равни числители

10. 3 задача: 2, ,7 =
а) 0, б) 34, в) 35, г) 58,3
-0,64% А)3,11% Б)10,29% В) 81,61% Г)4,34%
10,29% посочват за отговор 34,63, което показва,че владеят събирането на целите части, но не е усвоено подреждането на дробните разреди при събирането.

11. 12 % събират знаменателите на дробите;
4 задача:
а) б) в) г)
-0,54% А)12,04% Б)5,09% В)1,93% Г) 80,40%
12 % събират знаменателите на дробите;
5 % намират НОЗ, но не поставят допълнителни множители

12. 8 % изваждат знаменателите 4 % събират знаменателите и числителите
5 задача:
а) б) в) г)
-0,88% А)83,75% Б)8,10% В) 3,65% Г)3,62%
8 % изваждат знаменателите
4 % събират знаменателите и числителите

13. 6 задача: Кое от равенствата НЕ е вярно? а) б) в) г)
а) б) в) г)
-1,29% А)6,60% Б)67,21% В)9,92% Г)14,99%
33 % са затруднени при посочване на неправилното решение, като 16 % не разпознават разместителното свойство и правилото за умножение на дроби

14. Невярно определят мястото на десетичната запетая : 0,3060 или 3,06
7 задача: 0,03 . 1,02 =
а) 0, б) 0, в) 0, г) 3,06
-1,39% А)70,80% Б)7,83% В)4,10% Г)15,87%
Невярно определят мястото на десетичната запетая : 0,3060 или 3,06
8 % от учениците приемат 102 като 12, но правилно определят броя на десетичните знаци след запетаята (0,0360)

15. 8 задача:
а) б) в) г)
-1,13% А)8,85% Б) 9,14% В) 76,14% Г)4,75%
24% не владеят правилото за деление на обикновени дроби, като умножават реципрочното число на делимото с делителя или реципрочните числа и на делимото и на делителя;

16. 12,09 % не владеят ред на действията в израз;
9 задача: ,3 – 0,3 . 4 =
а) б) 4, в) 3, г) 2,1
-1,34% А)12,09% Б) 5,12% В)15,44% Г)66,01%
12,09 % не владеят ред на действията в израз;
5,12 % правилно извършват само умножението;
15,44 % неправилно подреждат дробните разреди в разликата

17. 10 задача:
а) б) в) г)
-3,19% А)7,45% Б)69,36% В)13,03% Г) 6,97%
13,03 % не владеят реда на действията в израза, но правилно събират обикновена дроб със смесено число и привеждат към общ знаменател;
изразът се приема за приложение на разпределително свойство а + в.с  (а + в).с

18. 11 задача: На колко е равен х, ако х + 1,5 = 3,2 ?
а) 1, б) 2, в) 3, г) 4,7
-1,26% А) 79,06% Б) 6,65% В) 4,10% Г) 8,93%
6,65 % не прилагат изваждане на числата по разреди;
13 % не умеят да намират неизвестно събираемо

19. 34 % не умеят да съставят модел
12 задача: Намислих едно число. Умножих го с и получих числото 0,2.
Кое е намисленото число?
а) б) в) г) 0,3
-2,79% А) 13,14% Б) 5,60% В)12,84% Г)65,63%
34 % не умеят да съставят модел

20. 13 задача: Кое от числата се дели на 3? а) 491 б) 463 в) 613 г) 705
а) б) в) г) 705
-1,34% А) 3,14% Б) 9,20% В) 9,95% Г) 76,38%
24 % не владеят признака за делимост на 3. Не е усвоен алгоритъма и не може да се приложи практически. Не са приложени и знанията за деление на трицифрено число на 3 с остатък.

21. 14 задача: НОД ( 44:66) = а) 132 б) 22 в) 12 г) 11
а) б) в) г) 11
- 1,72% А) 22,12% Б) 53,57% В) 7,80% Г) 14,80%
22,12 % не разбират смисъла на съкращението НОД и смесват с НОК, а 14,80 % с ОД.

22. 15 задача: В кой от примерите приближената стойност на числото е намерена НЕПРАВИЛНО ?
а) 3,246  3, б) 5,166 5, в) 10,063  10, г) 13,13  13,2
- 1,85% А) 7,08% Б) 10,24% В) 11,34% Г) 69,49%
30 % не владеят закръгляне на десетични дроби. Възможно е част от учениците да не са прочели или разбрали въпроса (НЕПРАВИЛНО), назависимо от големината на шрифта.

23. 16 задача: На колко са равни 20 % от 15 ? а) 0,3 б) 3 в) 30 г) 300
а) 0, б) в) г) 300
- 1,50% А) 7,29% Б) 66,73% В) 12,84% Г) 11,64%
24 % не владеят понятието процент и от там намиране на процент от число.
Липсата на тези познания, които са с практически насоченост, ще се отразят негативно и на междупредметните връзки.

24. 17 задача: Страната на ромб е равна на страната на равностранен триъгълник с обиколка 6 дм. На колко е равна обиколката на ромба?
 а) 8 дм б) 4 дм в) 12 дм г) 14 дм
-3,11% А) 61,45% Б) 7,37% В) 23,14% Г) 4,93%
39 % се затрудняват при изчисление страната на равностранния триъгълник и определянето обиколката на ромб.

25. 30% приравняват 1 час на 100 минути.
18 задача: 12 минути са равни на:
а) ч б) 0,12 ч в) ч г) ч.
-1,37% А) 46,65% Б)29,97% В)7,83% Г)14,18%
30% приравняват 1 час на 100 минути.
не са формирани умения за определяне на части от именуваните единици

26. 19 задача: Каква част са 30 години от 1 век ? а) б) в) г) 0,03
а) б) в) г) 0,03
- 1,72% А) 10,59% Б) 5,60% В) 62,39% Г)19,71%
38 % се затрудняват при намиране на неизвестна част от число, като 20 % посочват 0,03 като отговор.

27. 20 задача: Каква част от декара са 200 кв.м ?
а) б) в) 0, г) 0,02
- 2,36% А) 41,82% Б) 10,29% В) 25,34% Г) 20,19%
58 % се затрудняват при използване на декар като мерна единица за лице (1 дка=1000 кв.м)

28. 10 % не владеят умножение на десетична дроб с естествено число
21 задача: Намерете обиколката на равностранен триъгълник със страна 1,5 см.
а) 0,5 см б) 4,5 см в) 3,5 см г) 2,25 см
- 1,80% А) 5,92% Б) 77,69% В) 9,76% Г) 4,83%
6% не разбират зависимостта между обиколка и страна на равностранен триъгълник
10 % не владеят умножение на десетична дроб с естествено число
5 % не разграничават и смесват понятията обиколка на равностранен триъгълник и лице на квадрат 

29. смесват се понятията за обиколка и лице на фигура
22 задача: Ако страната на едно квадратче от квадратна мрежа е 1 см, то на колко е равно лицето на трапеца?
а) 10 кв. см б) 10,5 кв.см в) 15 кв.см г) 21 кв.см
-3,32% А) 14,32% Б) 47,86% В) 24,32% Г)10,19%
смесват се понятията за обиколка и лице на фигура
не владеят формулата за лице на трапец
не владеят метода на лицата
Sф= или Sф= S -

30. 12 % не владеят терминологията стени ръбове върхове
23 задача: Колко стени има един куб?
а) б) в) г) 12
- 0,97% А) 10,86% Б) 74,61% В) 5,74% Г) 7,83%
12 % не владеят терминологията
стени
ръбове
върхове

31. 27 % не могат да приложат формулата за обем
24 задача: На колко е равна височината на правоъгълен паралелепипед с обем 78 куб. см, дължина 5 см и ширина 3 см?
а) 4 см б) 26 см в) 52 мм г) 52 см
- 4,77% А)8,04% Б)18,82% В)44,80% Г)23,57%
27 % не могат да приложат формулата за обем
68 % владеят формулата, но само 45 % от тях се справят с мерните единици и преминаването от една в друга

32. Непосочени отговори
Непосочените отговори (под 2% ) не показват дали ученикът проява несигурност или невнимание. Още в клас е необходимо да се акцентира на последният етап при писмена работа: дооглеждане и повторна проверка на полученото. Недочитането на условието (6 и 15 задача), съдържащо отрицание също води до грешки.
2. Пет от задачите (10,12,16,22,24 ) очевидно са затруднили учениците.

33. ИЗВОДИ:
Учениците успешно са се справили със задачите, които са поднесени по познат начин и контекст, и са изучавани по-продължително време.
Затрудняват се при решаване на задачи от вида:
намиране лице на геометрична фигура и преминаване от една мерна единица в друга
част от цяло
процент
съставяне на математически модел

34. Варна 19 - 20 Февруари 2011 година Десета научно- практическа
конференция
Варна
Февруари 2011 година
Custom animation effects: page turns in open book
(Difficult)
Tip: You will need to use drawing guides and the ruler to position the objects on this slide. For instructions on animating an opening book cover, refer to the previous slide (Custom animation effects: open book) for instructions.
To display the drawing guides and the ruler, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Right-click the slide background area, and then click Grid and Guides. In the Grid and Guides dialog box, under Guide settings, select Display drawing guides on screen. (Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. The spine of the book will be aligned to the vertical drawing guide.)
On the View tab, in the Show/Hide group, select Ruler.
To reproduce the first shape in the Inside-left page 1 group on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rounded Rectangle (second option from the left). On the slide, drag to draw a rounded rectangle.
Select the rounded rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:
In the Shape Height box, enter 4.5”.
In the Shape Width box, enter 3.33”.
On the rounded rectangle, drag the yellow diamond adjustment handle to the left to reduce the amount of rounding on the corners.
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Linear.
Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).
In the Angle box, enter 180°.
Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.
Also under Gradient stops, customize the gradient stops that you added as follows:
Select Stop 1 from the list, and then do the following:
In the Stop position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 50% (sixth row, sixth option from the left).
Select Stop 2 from the list, and then do the following:
In the Stop position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Red Accent 2, Darker 25% (fifth row, sixth option from the left).
Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select No line.
On the slide, drag the rectangle until the right edge is against the vertical drawing guide.
On the Home, tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
To reproduce the second shape in the Inside-left page 1 group on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:
In the Shape Height box, enter 4.33”.
In the Shape Width box, enter 3.15”.
Under Gradient stops, click Add or Remove until five stops appear in the drop-down list.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, the first option from the left).
In the Stop position box, enter 5%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Select Stop 3 from the list, and then do the following:
In the Stop position box, enter 18%.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 5% (second row, first option from the left).
Select Stop 4 from the list, and then do the following:
In the Stop position box, enter 38%.
Select Stop 5 from the list, and then do the following:
In the Stop position box, enter 93%.
Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer click Offset Right (second row, first option from the left), and then do the following:
In the Transparency box, enter 60%.
In the Size box, enter 100%.
In the Blur box, enter 4 pt.
In the Angle box, enter 0°.
In the Distance box, enter 3 pt.
On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
On the Home tab, in the Editing group, click Select and then click Select All. On the Home tab, in the Drawing group, click Arrange, and then click Group.
On the Home tab, in the Editing group, click Select, and then click Selection Pane.
In the Selection and Visibility pane, double-click the group to edit the name, and then enter Inside-left page 1.
To reproduce the first shape in the Inside-right page 3 group on this slide, do the following:
On the Selection and Visibility pane, select the Inside-left page 1 group.
On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.
On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.
On the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-right.
On the slide, drag the Inside-right group until the left edge is against the vertical drawing guide.
To reproduce the text box in the Inside-right page 3 group on this slide, do the following:
On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw the text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, select Bodoni MT Condensed.
In the Font Size list, select 16.
Drag the text box onto the right-side page to the right of the vertical drawing guide.
If the text is wider than the page, drag the adjustment handles on the text box to decrease the width, and then repeat the previous step to reposition.
To reproduce the page edges in the Inside-right page 3 group on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left).
On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line.
Select the vertical line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 4.32”.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Outline, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process until there is a total of six lines.
On the slide, drag the lines until they are bunched together in a dense group, no wider than 0.5”.
In the Selection and Visibility pane, press and hold CTRL, and then select the six straight connectors (lines).
On the Home tab, in the Drawing group, click Arrange, and then do the following:
Point to Align, and then click Align Selected Objects.
Point to Align, and then click Distribute Horizontally.
Point to Align, and then click Align Middle.
Click Group.
On the slide, drag the group of lines until the right edge is touching the right edge of the white rectangle to the right of the vertical drawing guide.
In the Selection and Visibility pane, press and hold CTRL, and then select the group of lines, the text box, and the Inside-right group.
On the Home tab, in the Drawing group, click Arrange, and then click Group.
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right page 3.
To reproduce the first shape in the Inside-left page 2 group on this slide, do the following:
Under Drawing Tools, on the Format tab, in the Size group, do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).
On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:
To reproduce the page edge in the Inside-left page 2 group on this slide, do the following:
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Outline, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
On the slide, drag the line near the edge of the left-side page (white rectangle to the left of the vertical drawing guide).
In the Selection and Visibility pane, press and hold CTRL, and then select the rectangle and the straight connector (line).
On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-left page 2.
To reproduce the first shape in the Inside-right page 2 group on this slide, do the following:
In the Selection and Visibility pane, select the Inside-left page 2 group.
With the duplicate group still selected, on the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.
In the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-right.
In the Selection and Visibility pane, select the new Inside-right group. On the slide, drag the selected group until the left edge is against the vertical drawing guide.
On the Home, tab, in the Drawing group, click Arrange, point to Align, and then do the following:
On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert.
On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. Select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 1.4” and the Width box is set to 2.1”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.
On the slide, drag the picture until the left edge is 0.5” to the right of the vertical drawing guide and the bottom edge is 0.5” above the horizontal drawing guide.
To reproduce the text box in the Inside-right page 2 group on this slide, do the following:
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
On the slide, drag the text box until the left edge of the text is 0.5” to the right of the vertical drawing guide and the top edge of the text is against the horizontal drawing guide.
If the text is too wide for the page, drag the adjustment handles on the text box to adjust the width, and then repeat the previous step to reposition.
To reproduce the page edges in the Inside-right page 2 group on this slide, do the following:
In the Selection and Visibility pane, select the Inside-right group you just created. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.
In the Selection and Visibility pane, select the straight connector (line) that you just ungrouped from the page. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process for a total of six lines.
On the slide, drag the six lines until they are bunched together in a dense group, no wider than 0.5”.
In the Selection and Visibility pane, press and hold CTRL, and then select the six straight connectors (lines). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Distribute Horizontally.
With the group of lines still selected, on the Home tab, in the Drawing group, click Arrange, and then click Group.
On the slide, drag the group until the right edge of the group of lines is touching the right edge of the page.
In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines and the rectangle. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
Also in the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right.
Also in the Selection and Visibility pane, press and hold CTRL, and then select the Inside-right group, the text box, and the picture. On the Home tab, in the Drawing group, click Arrange, and then click Group.
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right page 2.
To reproduce the first shape in the Inside-left page 3 group, do the following:
In the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-left.
To reproduce the picture in the Inside-left page 3 group, do the following:
On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 1.4” and the Width box is set to 2.1”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.
On the slide, drag the picture until the left edge is 0.5” to the right of the vertical drawing guide and the top edge is 0.25” below the horizontal drawing guide.
To reproduce the text box in the Inside-left page 3 group, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.
On the slide, drag the text box until the right edge of the text is 0.5” to the left of the vertical drawing guide and the bottom edge of the text is 0.25” above the horizontal drawing guide.
If the text is too wide for the page, drag the adjustment handles on the text box to decrease the width, and then repeat the previous step to reposition.
To reproduce the page edges in the Inside-left page 3 group, do the following:
In the Selection and Visibility pane, select the Inside-left group you just created. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.
In the Selection and Visibility pane, select the straight connector (line) that you just ungrouped from the page. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.
On the slide, drag the duplicate line until it is very close to the original line.
In the Selection and Visibility pane, press and hold CTRL, and then select the two straight connectors (lines). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
On the slide, drag the group until the left edge of the group of lines is touching the left edge of the rectangle.
In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines, the rectangle, the text box, and the picture. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
Also in the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-left page 3.
To reproduce the first shape in the Inside-right page 1 group on this slide, do the following:
In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right.
In the Selection and Visibility pane, select the Inside-right group. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.
On the slide, drag the group until the left edge is against the vertical drawing guide.
To reproduce the text box in the Inside-right page 1 group on this slide, do the following:
On the Insert tab, in the Text group, click Text Box. Drag to draw a text box on the slide.
Enter text in the text box (to match the example above, enter Introduction), and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, select Vivaldi.
In the Font Size list, select 18.
On the Home tab, in the Paragraph group, click Center to center the text in the text box.
On the slide, drag the text box until the left edge of the text is 0.75” to the right of the vertical drawing guide and the bottom edge of the text is 0.5” above the horizontal drawing guide.
To reproduce the page edges in the Inside-right page 1 group on this slide, do the following:
In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines, the rectangle, and the text box. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.
Also in the Selection and Visibility pane, press and hold CTRL, double-click the new group to edit the name, and then enter Inside-right page 1.
Right-click the slide background area, and then click Grid and Guides. In the Grid and Guides dialog box, under Guide settings, clear Display drawing guides on screen.
On the View tab, in the Show/Hide group, clear Ruler.
In the Selection and Visibility pane, the final arrangement of the six groups of objects should be the following (from top to bottom):
Inside-right page 1
Inside-left page 3
Inside-right page 2
Inside-left page 2
Inside-right page 3
Inside-left page 1
To move a group of objects up in the Selection and Visibility pane, do the following:
In the Selection and Visibility pane, select the group of objects.
On the Home tab, in the Drawing group, click Arrange, and then click Bring Forward.
To move a group of objects down in the Selection and Visibility pane, do the following:
On the Home tab, in the Drawing group, click Arrange, and then click Send Backward.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Animations group, click Custom Animation.
In the Selection and Visibility pane, select the Inside-right page 1 group. In the Custom Animation task pane, do the following:
Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Moderate, click Collapse.
Select the first animation effect (collapse effect for the Inside-right page 1 group). Under Modify: Collapse, do the following:
In the Start list, select With Previous.
In the Direction list, select To Left.
In the Speed list, select Fast.
In the Selection and Visibility pane, select the Inside-left page 2 group. In the Custom Animation task pane, do the following:
Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Moderate, click Stretch.
Select the second animation effect (stretch effect for the Inside-left page 2 group). Under Modify: Stretch, do the following:
In the Start list, select After Previous.
In the Direction list, select From Right.
In the Selection and Visibility pane, select the Inside-right page 2 group. In the Custom Animation task pane, do the following:
Select the third animation effect (collapse effect for the Inside-right page 2 group). Under Modify: Collapse, do the following:
In the Start list, select On Click.
In the Selection and Visibility pane, select the Inside-left page 3 group. In the Custom Animation task pane, do the following:
Select the fourth animation effect (stretch effect for the Inside-left page 3 group). Under Modify: Stretch, do the following:
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Click the button next to Direction, and then click Linear Down (first row, second option from the left).
In the Stop position box, enter 63%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, fifth option from the left).