1. Da’ Fuser Team Turbojet Diffuser Study Progress Report 3 Robby Swoish Mike Vostrizansky Ryan Wiltshire November 10, 2005

2. Progress Completed baseline pressure data measurements Completed baseline pressure data measurements Ran tests with two different mach numbersRan tests with two different mach numbers Cut diffuser model into two pieces so that the interior of the model may be accessed Cut diffuser model into two pieces so that the interior of the model may be accessed

3. Experimental Setup

4. Tests 5 and 6 Goal: Characterize initial pressure distribution in diffuser model for two mach numbers between.3 and.4 Goal: Characterize initial pressure distribution in diffuser model for two mach numbers between.3 and.4 Current Status: Data needs to be analyzed Current Status: Data needs to be analyzed

5. Cut Diffuser

6. Future Work Analyze baseline data Analyze baseline data Use China Clay to characterize separation point Use China Clay to characterize separation point Modify model and test Modify model and test Reiterate modification and testing scheme Reiterate modification and testing scheme

7. Investigation Schedule Progress (weeks)

8. Potential Modifications Boundary Layer Control By: Boundary Layer Control By: –Suction –Blowing –Vanes –Flow Control Rails –High Inlet Turbulence –Other Vortex Generators