1. Timeline on the laser setup Show a conceptual design on the metal box, 2 iterations Check design, i.e. all details fit the actual physical constraints, size the flange, bellows, rod, etc… Draw each part with all its dimensions –1 st set of drawings sent to machine shop –2 nd set of drawings also sent to machine shop –3 rd set contains the holder and flange (for belows) details Order parts –Handles (2) –Hinges (3) –Bellows (2) –Screws (100) Fabricate the pieces in machine shop (~2weeks)

2. On the way Construct-assemble (~1week) –Test light-tightness –Setup gas and flow if needed Familiarizing with the X-Y stage control software –Use a diode before working on the sensor. –Test the position resolution ?? Start on DAQ and electronics. Measure the first sensor

3. The optic fiber holder

4. The flange