1. Greg Kelly, Hanford High School, Richland, WashingtonPhoto by Vickie Kelly, 2003 7.2 B Volumes by the Washer Method Limerick Nuclear Generating Station, Pottstown, Pennsylvania

2. Find the volume of a solid of revolution using the disk method. Find the volume of a solid of revolution using the washer method. Find the volume of a solid with known cross sections. Objectives

3. Find the volume of the solid generated by revolving the region bounded by the graphs of the equations about the y-axis. Volume of a cone? Homework Quiz

4. The Washer Method

5. The disk method can be extended to cover solids of revolution with holes by replacing the representative disk with a representative washer. The washer is formed by revolving a rectangle about an axis, as shown in Figure 7.18. If r and R are the inner and outer radii of the washer and w is the width of the washer, the volume is given by Volume of washer = π(R 2 – r 2 )w. The Washer Method Figure 7.18

6. To see how this concept can be used to find the volume of a solid of revolution, consider a region bounded by an outer radius R(x) and an inner radius r(x), as shown in Figure 7.19. Figure 7.19 The Washer Method

7. If the region is revolved about its axis of revolution, the volume of the resulting solid is given by Note that the integral involving the inner radius represents the volume of the hole and is subtracted from the integral involving the outer radius. The Washer Method

8. Example 3 – Using the Washer Method Find the volume of the solid formed by revolving the region bounded by the graphs of about the x-axis, as shown in Figure 7.20. Figure 7.20 http://web.monroecc.edu/manila/webfiles/pseeburger/secure/MyLarson/ch7/LC7_2washer.htm

9. The region bounded by and is revolved about the x-axis. Find the volume. The “disk” now has a hole in it, making it a “washer”. If we use a vertical slice: The volume of the washer is: outer radius inner radius

10. This application of the method of slicing is called the washer method. The shape of the slice is a circle with a hole in it, so we subtract the area of the inner circle from the area of the outer circle. The washer method formula is:

11. Example 3 – Solution In Figure 7.20, you can see that the outer and inner radii are as follows. Integrating between 0 and 1 produces

12. Example 3 – Solution

13. The region bounded by and is revolved about the y-axis. Find the volume. The “disk” now has a hole in it, making it a “washer”. If we use a horizontal slice: The volume of the washer is: outer radius inner radius

14. If the same region is rotated about the line x = 2 : The outer radius is: R The inner radius is: r 

15. Two Integral Example: Find the volume of the solid formed by revolving the region bounded by the graphs of : about the y-axis.

16. Example 4 – Solution For the region shown in Figure 7.21, the outer radius is simply R = 1. There is, however, no convenient formula that represents the inner radius. When 0 ≤ y ≤ 1, r = 0, but when 1 ≤ y ≤ 2, r is determined by the equation y = x 2 + 1, which implies that

17. Example 4 – Integrating with Respect to y, Two-Integral Case http://mathdemos.gcsu.edu/mathdemos/washermethod/gallery/washers_10_solid.gif Figure 7.21

18. Example 4 – Solution Using this definition of the inner radius you can use two integrals to find the volume.

19. #6. Find the volume of the solid formed by revolving the region about the x-axis.

20. #5. Find the volume of the solid formed by revolving the region about the x-axis.

21. Homework: Pg. 463: 13-37 odds