Presentation is loading. Please wait.

Presentation is loading. Please wait.

1. Cooling tower. 2. Cooling water pump. 3. Transmission line (3-phase). 4. Unit transformer (3-phase). 5. Electric generator (3-phase). 6. Low pressure.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "1. Cooling tower. 2. Cooling water pump. 3. Transmission line (3-phase). 4. Unit transformer (3-phase). 5. Electric generator (3-phase). 6. Low pressure."— Presentation transcript:

1 1. Cooling tower. 2. Cooling water pump. 3. Transmission line (3-phase). 4. Unit transformer (3-phase). 5. Electric generator (3-phase). 6. Low pressure turbine. 7. Condensate extraction pump. 8. Condensor. 9. Intermediate pressure turbine. 10. Steam governor valve. 11. High pressure turbine. 12. Deaerator. 13. Feed heater. 14. Coal conveyor. 15. Coal hopper. 16. Pulverised fuel mill. 17. Boiler drum. 18. Ash hopper. 19. Superheater. 20. Forced draught fan. 21. Reheater. 22. Air intake. 23. Economiser. 24. Air preheater. 25. Precipitator. 26. Induced draught fan. 27. Chimney Stack.

2

3

4

Download ppt "1. Cooling tower. 2. Cooling water pump. 3. Transmission line (3-phase). 4. Unit transformer (3-phase). 5. Electric generator (3-phase). 6. Low pressure."

Similar presentations

An Introduction To Marine Steam Propulsion Plant [Source: US Navy]

An Introduction To Marine Steam Propulsion Plant [Source: US Navy]
Steam and Water Accessories

Steam and Water Accessories
Main Steam Cycle Let the fun begin….

Main Steam Cycle Let the fun begin….
About NTPC NTPC, India's largest power company, was set up in 1975 to accelerate power development in India. It is emerging as an' Integrated Power Major’,

About NTPC NTPC, India's largest power company, was set up in 1975 to accelerate power development in India. It is emerging as an' Integrated Power Major’,
Power Stations Thermal power stations. Introduction A thermal power station is a power plant in which the prime mover is steam driven.power plantprime.

Power Stations Thermal power stations. Introduction A thermal power station is a power plant in which the prime mover is steam driven.power plantprime.
Www.powerplantinstrumentation.yolasite.com. In India 65% of total power is generated by the Thermal Power Stations. Main parts of the plant are 1. CHP.

In India 65% of total power is generated by the Thermal Power Stations. Main parts of the plant are 1. CHP.
Thermal Power Station Plant. Introduction 150 MW Thermal power station plant, produce 450t/hr steam at full load The max steam pressure is 150 bar with.

Thermal Power Station Plant. Introduction 150 MW Thermal power station plant, produce 450t/hr steam at full load The max steam pressure is 150 bar with.
PRESENTATION OF INDUSTRIAL TRAINING ON

PRESENTATION OF INDUSTRIAL TRAINING ON
THERMAL POWER PLANT.

THERMAL POWER PLANT.
Reading: Cengel & Boles, Chapter 9

Reading: Cengel & Boles, Chapter 9
Steam (Vapour) Power Plant Rankine cycle Power Plant

Steam (Vapour) Power Plant Rankine cycle Power Plant
WELCOMES ON THE OCCASION OF BOILER LIGHT UP OF UNIT #1.

WELCOMES ON THE OCCASION OF BOILER LIGHT UP OF UNIT #1.
Boiler FGT HRSG Coal Air To CO 2 - extraction Ash Power.

Boiler FGT HRSG Coal Air To CO 2 - extraction Ash Power.
Reheat cycle.

Reheat cycle.
Steam Power Plant.

Steam Power Plant.
Thermal_Power_Plant_2 Prepared by: NMG

Thermal_Power_Plant_2 Prepared by: NMG
Lesson 7 Steam Power Plant.

Lesson 7 Steam Power Plant.
Steam Power Station Presented By Ashvin G. Patel Asst. Prof. (E.E.)

Steam Power Station Presented By Ashvin G. Patel Asst. Prof. (E.E.)
Presented by Ashis Kumar Chakraborty, Climate Change Future Guidelines for Environmental Benefits. from Super Critical Power Generation Units.

Presented by Ashis Kumar Chakraborty, Climate Change Future Guidelines for Environmental Benefits. from Super Critical Power Generation Units.
POWER PLANT TECHNOLOGY INTRODUCTION AND OVERVIEW Prof. Anand Bhatt.

POWER PLANT TECHNOLOGY INTRODUCTION AND OVERVIEW Prof. Anand Bhatt.

Similar presentations

Ads by Google