Presentation is loading. Please wait.

Presentation is loading. Please wait.

EEE 302 Electrical Networks II

Similar presentations


Presentation on theme: "EEE 302 Electrical Networks II"— Presentation transcript:

1 EEE 302 Electrical Networks II
Dr. Keith E. Holbert Summer 2001 Lecture 22

2 Resonant Circuits Resonant frequency: the frequency at which the impedance of a series RLC circuit or the admittance of a parallel RLC circuit is purely real, i.e., the imaginary term is zero (ωL=1/ωC) For both series and parallel RLC circuits, the resonance frequency is At resonance the voltage and current are in phase, (i.e., zero phase angle) and the power factor is unity Lecture 22

3 Quality Factor (Q) An energy analysis of a RLC circuit provides a basic definition of the quality factor (Q) that is used across engineering disciplines, specifically: The quality factor is a measure of the sharpness of the resonance peak; the larger the Q value, the sharper the peak where BW=bandwidth Lecture 22

4 Bandwidth (BW) The bandwidth (BW) is the difference between the two half-power frequencies BW = ωHI – ωLO = 0 / Q Hence, a high-Q circuit has a small bandwidth Note that: 02 = ωLO ωHI See Figs and in textbook (p. 692 & 694) Lecture 22

5 Series RLC Circuit For a series RLC circuit the quality factor is
Lecture 22

6 Class Examples Extension Exercise E12.8 Extension Exercise E12.9
Lecture 22

7 Parallel RLC Circuit For a parallel RLC circuit, the quality factor is
Lecture 22

8 Class Example Extension Exercise E12.13 Lecture 22

9 Scaling Two methods of scaling:
1) Magnitude (or impedance) scaling multiplies the impedance by a scalar, KM resonant frequency, bandwidth, quality factor are unaffected 2) Frequency scaling multiplies the frequency by a scalar, ω'=KFω resonant frequency, bandwidth, quality factor are affected Lecture 22

10 Magnitude Scaling Magnitude scaling multiplies the impedance by a scalar, that is, Znew = Zold KM Resistor: ZR’ = KM ZR = KM R R’ = KM R Inductor: ZL’ = KM ZL = KM jL L’ = KM L Capacitor: ZC’ = KM ZC = KM / (jC) C’ = C / KM Lecture 22

11 Frequency Scaling Frequency scaling multiplies the frequency by a scalar, that is, ωnew = ωold KF but Znew=Zold Resistor: R” = ZR = R R” = R Inductor: j(KF)L = ZL = jL L” = L / KF Capacitor: 1 / [j (KF) C] = ZC = 1 / (jC) C” = C / KF Lecture 22

12 Class Example Extension Exercise E12.15 Lecture 22


Download ppt "EEE 302 Electrical Networks II"

Similar presentations


Ads by Google