1. The Energy Challenge Chris Llewellyn Smith Part A – The energy challenge Part B – What can/must be done

2. 1) The world uses a lot of energy – at a rate of 15.7 TW average 2.4 kW per person [UK – 5.1 kW, Spain 4.4] - very unevenly (use per person in USA = 2.1xUK = 48x Bangladesh) 2) World energy use is expected to grow 50% by 2030 - growth necessary to lift billions of people out of poverty 3) 80% is generated by burning fossil fuels  climate change & debilitating pollution - which won’t last for ever Need more efficient use of energy (and probably a change of life style) and major new/expanded sources of clean energy - this will require fiscal measures and new technology Energy Facts

3. 1.6 billion people (over 25% of the world’s population) lack electricity: Source: IEA World Energy Outlook 2006

4. Distances travelled to collect fuel for cooking in rural Tanzania; the average load is around 20 kg Source: IEA World Energy Outlook 2006

5. Deaths per year (1000s) caused by indoor air pollution (biomass 85% + coal 15%); total is 1.5 million – over half children under five

6. Annual deaths worldwide from various causes Source: IEA World Energy Outlook 2006 * adding coal, total is 1.5 M

7. One example of the asymmetry of the likely effects of climate change Source: Stern Review

8. HDI ( ~ life expectancy at birth + adult literacy & school enrolment + GNP per person at PPP) and Primary Energy Demand per person, 2002 For all developing countries to reach this point, would need world energy use to double with today’s population, or increase 2.6 fold with the 8.1 billion expected in 2030 If also all developed countries came down to this point the factors would be 1.8 today, 2.4 in 2030 Goal (?) To reach this goal seems need Human Development Index tonnes of oil equivalent/capita

9. * (completely impossible* while reducing CO 2 emissions) – need to lower target * at least without a large reduction in population: there could be a Malthusian “solution” – it is 77% of current UK per capita usage*, which (I think) could easily be tolerable for Japan, Europe * 38% for USA Reaching 3 tonnes of oil equivalent (toe) per capita for everyone seems almost impossible* (completely impossible* while reducing CO 2 emissions) – need to lower target * at least without a large reduction in population: there could be a Malthusian “solution” But 3 toe looks quite luxurious as a target for all – it is 77% of current UK per capita usage*, which (I think) could easily be tolerable for Japan, Europe * 38% for USA Equity (same energy for all) without any energy increase would require going to 46% of current UK usage per capita at current population level (23% for USA) - 35% with 8.1 billion population (18% for USA)! Equity without lots more energy (whence?) would require changes of life style in the developed world

10. Sources of Energy World’s primary energy supply (rounded): 80 % - burning fossil fuels (43% oil, 32% coal, 25% natural gas) 10%- burning combustible renewables and waste 5%-nuclear 5%-hydro 0.5%-geothermal, solar, wind,... NB Primary energy defined here for hydro, solar and wind as equivalent primary thermal energy electrical energy output for hydro etc is also often used, e.g. hydro ~ 2.2%

11. Fossil Fuels are – generating debilitating pollution (300,000 coal pollution deaths pa in China; Didcot Power Station [large coal & gas fired plant near Oxford] has probably killed more people than Chernobyl) – driving potentially catastrophic climate change and and will run out sooner or later (later if we can exploit methyl hydrates) Saudi saying “My father rode a camel. I drive a car. My son flies a plane. His son will ride a camel” Is this true? Perhaps

12. WithWith With current growth, the 95 year (2100) line will be reached in: 2068 for oil (growth 1.2% pa but growth will  decline beyond ‘Hubbert peak’) 2049 for gas (growth 3.1% pa) 2041 for coal (growth 4.5% pa); note – some people believe coal resource much smaller

13. Oil Supply Note: discoveries back-dated

14. Source: ASPO Oil Supply

15. Fossil Fuel Use - a brief episode in the world’s history

16. UNCONVENTIONAL OIL Unconventional oil resources* are thought to amount to ‘at least’ 1,000 billion barrels (compared to 2,300 billion barrels of conventional oil remaining according to the USGS) *oil sands in Canada, extra heavy oil in Venezuela, shale oil in the USA,… - generates 2% of global oil supply today → 8% by 2030? Expected increase mainly in Canada. Cost of producing synthetic crude (which is very sensitive to price of gas or other fuel used → steam injected to make bitumen flow) is currently $33/barrel (vs. a few $s/barrel in Saudi Arabia) Production of 1 barrel of crude requires 0.4 barrels of oil equivalent to produce steam

17. Methyl Hydrates – Bane or Boon?  MHs are gases (bacterially generated methane) trapped in a matrix of water at low temperature and/or high pressure in permafrost and marine sediments (below 500m)  USGS (which thinks that 370 trillion m 3 of natural gas are left) estimates that there are (2,800 – 8.5M) trillion m 3 of MHs  Bane? Methane in MHs could be released by global warming; some evidence that this happened 55.5M years ago (late Paleocene) when the temperature rose by 5-8C  Boon? Potentially a huge source of energy: - Permafrost: Japanese test underway in Canada to release by drilling into porous sandstone containing MHs (release by pressure decrease) - Sea: danger of ‘boiling’ sinking ships and rigs

18. Use of Energy  Electricity production uses ~ 1/3 of primary energy (more in developed world; less in developing world) - this fraction could (and is likely in the future to) be higher  End Use (rounded)  25% industry  25% transport  50% built environment  31% domestic in UK (private, industrial, commercial)

19. Note that mixture of fuels used → electricity is very different in different countries e.g. coal ~ 35% in UK, ~76% in China (where hydro ~ 18%) Source: IEA WEO. 2008 IEA Key Statistics give 2.3% of ‘Other’ (2006 data)

20. Conclusions on Energy Challenge Large increase in energy use expected, and needed to lift billions out of poverty Seems (IEA World Energy Outlook) that it will require an increased use of fossil fuels – which is driving potentially catastrophic climate change* – will run out sooner or later There is therefore an urgent need to reduce energy use (or at least curb growth), and seek cleaner ways of producing energy on a large scale IEA: “Achieving a truly sustainable energy system will call for radical breakthroughs that alter how we produce and use energy” *Ambitious goal for 2050 - limit CO 2 to twice pre-industrial level. To do this while meeting expected growth in power consumption would need 50% more CO 2 -free power than today’s total power US DoE “The technology to generate this amount of emission-free power does not exist”

21. Meeting the Energy Challenge – what can/must be done? I Introduce fiscal measures and regulation to change behaviour (reduce consumption) and stimulate R&D (new/improved technology) Increased investment in energy research* will be essential *public funding down 50% globally since 1980 in real terms; world’s publicly funded energy R&D budget ~ 0.25% of energy market (which is $4 trillion a year) Note – when considering balance of R&D funding, should bring market incentives/subsidies (designed to encourage deployment of renewables) into the picture

22. Coal 44.5% Oil and gas 30% Fusion 1.5% Fission 6% Renewables 18% Energy subsidies (€28 bn pa) + R&D (€2 bn pa) in the EU in 2001 ~ 30 Billion Euro (per year) Source : EEA, Energy subsidies in the European Union: A brief overview, 2004. Fusion and fission are displayed separately using the IEA government-R&D data base and EURATOM 6th framework programme data

23. Meeting the Energy Challenge II Recognise that the solution will be a cocktail (there is no silver bullet), including Actions to improve efficiency (+ avoid use) Use of renewables where appropriate (although individually not hugely significant globally, except in principle solar) BUT only four sources capable in principle of meeting a really large fraction of the world’s energy needs: Burning fossil fuels * (currently 80%) – must develop & deploy CO 2 capture and storage if feasible * remaining fossil fuels will be used Solar - seek breakthroughs in production and storage Nuclear fission - cannot avoid if we are serious about reducing fossil fuel burning (at least until fusion available) Fusion - with so few options, we must develop fusion as fast as possible, even if success is not 100% certain

24. Energy Efficiency Production e.g. world average power plant efficiency ~ 30% → 45% (state of the art) would save 4% of anthropic carbon dioxide Distribution – typically 10% of electricity lost* (→ 50% due to ‘non-technical losses’ in some countries: need better metering) *mostly local; not in high voltage grid Use: - more energy efficient buildings, CHP (40% → 85-90% use of energy) where appropriate - smart/interactive grid - more efficient transport - more efficient industry Huge scope but demand is rising faster Note: Energy intensity (= energy/gpd) fell 1.6% pa 1990-2004 Efficiency is a key component of the solution, but cannot meet the energy challenge on its own

25. The Built Environment Consumes ~ 50% of energy (transport 25% and industry 25%) → nearly 50% of UK CO 2 emissions due to constructing, maintaining, occupying buildings Improvements in design could have a big impact e.g. could cut energy used to heat homes by up to factor of three (but turn over of housing stock ~ 100 years) Tools: better information, regulation, financial instruments Source: Foster and Partners. Swiss Re Tower uses 50% less energy than a conventional office building (natural ventilation & lighting…)

26. APS Study of Building Efficiency In USA: buildings use 40% of primary energy - Heating and cooling: 500 GW primary energy (65% residential; 35% commercial) Lighting: 250 GW primary energy (43% residential; 57% commercial) 22% of all US electricity (29% world-wide) [Spain: total electricity 31 GW ~ 90 GW primary energy, thermal equivalent] Measures on lighting: Better use of natural light; reduce ‘over-lighting’; more efficient bulbs: Traditional incandescent bulbs ~ 5% efficient Compact fluorescent lights ~ 20% efficient Detailed study: in USA, upgrading residential incandescent bulbs and ballasts and lamps in commercial buildings could save = 3% of all electricity use ( If this finding translates pro rata to UK, it would save one 1 GW power station!) In longer term: LEDs (up to 50% efficient); R&D needed → white light + reduce cost

27. T TRANSPORT ~ 25% of primary energy Growing rapidly e.g. IEA thinks 700 million light vehicles today → 1,400 million in 2030 (China: 9m → 100m; India: 6.5 m → 56m) Is this possible? Can certainly not reach US levels: for the world’s per capita petrol consumption to equal that in the USA, total petrol consumption would have to increase by almost a factor of ten Consider light vehicles Major contributor to use of oil (passenger cars and light trucks use 63% of energy used in all transport in USA) + CO 2 Report APS Study of Potential improvements. Consider: what after the end of oil? (Biofuels, coal & gas → oil, electric, hydrogen…)

28. Trends: Improvements: front wheel drive, engine, transmission, computer control….. 1975 – 1985 mandatory Corporate Average Fuel Economy standards improved annually, but thereafter manufactures continued to improve efficiency but built heavier, more powerful cars:

29. MIT Study: In longer term maybe Plug-in Hybrids, hydrogen (or other) fuel cells Prospects for Improvements APS Considers 50 mpg (US) by 2030 reasonable * (decreased weight: -10% → 6-7% fuel economy), improved efficiency, hybrids + possibly Homogeneous Charge Compression Ignition, variable compression ratios, 2/4 stroke switching…. * 4.7 litres/100km

30. Petrol engines much less efficient than electric motors (90%), but comparison needs overall well to wheels analysis

31. Electric vs. Petrol Pro electric: efficiency Oil well → 90% tank → 0.9 x 12.6% = 11% wheels Source → 30% electricity → 0.3 x 90% = 27% battery → 0.27 x 90% = 24% wheels Source→ ? fuel cell →≤ ? x 60% electricity → ≤?x 0.6x 90% = ? x 55% wheels Pro petrol: weight/volume Petrol34.6 MJ/l47.5 MJ/kg Li ion battery (today) 0.7 MJ/l0.5 MJ/kg H at 1 atmosphere 0.009 MJ/l143 MJ/kg H at 10,000 psi 4.7 MJ/l143 MJ/kg Liquid hydrogen 10.1MJ/l143 MJ/kg APS “Hydrogen fuel cell vehicles unlikely to be more than a niche product without breakthroughs…challenges are durability and cost of fuel cells, including catalysts, cost-effective on-board storage, hydrogen production and deployment and refuelling infrastructure”

32. Hydrogen Excites public and politicians - no CO 2 at point of use Only helpful if no CO 2 at point of production e.g. - capture and store carbon at point of production - produce from renewables (reduced problem of intermittency) - produce from fission or fusion (electrolysis, or ‘catalytic cracking’ of water at high temperature) Usually considered for powering cars : Excellent energy/mass ratio but energy/volume terrible Need to compress or liquefy (uses ~ 30% of energy, and adds to weight), or absorb in light metals (big chemical challenge – being addressed by Oxford led consortium)

33. Renewables Could they replace a significant fraction of the 13 TW (and growing) currently provided by burning fossil fuels?  Solar could in principle power the world – given breakthroughs in energy storage and costs (which should be sought) – see later  Hydro - already significant: could add up to 1TW thermal equivalent  Wind - up to 3 TW thermal equivalent conceivable  Burning biomass - already significant: additional 1 TW conceivable  Geothermal, tidal and wave energy - 200 GW conceivable All should be fully exploited where sensible, but excluding solar, cannot imaging more than 6 TW – huge gap as fossil fuels decline [Conclusions are very location dependent: geothermal is a major player in Iceland, Kenya,…; the UK has 40% of Europe’s wind potential and is well placed for tidal and waves; the US south west is much better than the UK for solar; there is big hydro potential in the Congo;…]

34. Preliminary Conclusions Must improve efficiency – but at best will only stop growth (unless we are prepared to tolerate a very inequitable world). Needs initial investment, but can save a lot of money Must exploit renewables to the maximum extent reasonably possible (not easy as it will put up costs) Likely most of remaining fossil fuels will be burned. If so, carbon capture and storage is the only way to limit climate change (but will put up costs) In the long-run, will need (a combination of): - Large scale solar - Much more nuclear fission - Fusion

35. Carbon Capture and Storage In principle could capture CO 2 from power stations (35% of total) and from some industrial plants (not from cars, domestic…) Capture and storage - would add ~ $2c/kWh to cost for gas; more for coal - in both cases much more initially Storage - could (when location appropriate) be in depleted gas fields, depleted oil fields, deep saline aquifers Issues are safety and cost (capture typically reduces efficiency by 10 percentage points, e.g. 46% → 37%, 41% → 32%,..) With current technology: capture, transmission and storage would ~ double generation cost for coal

37. After capture, compress (>70 atmos → liquid) transmit and store (>700m):

39. Conclusions on Carbon Capture and Storage Mandatory if feasible and the world is serious about climate change - big potential if saline aquifers OK (said to be plenty in China and India) Large scale demonstration very important - First end-to-end CCS power station just opened in N Germany (30MW oxy-fuel add–on → steam to turbines in existing 1 GW power station) - EU Zero Emissions Power strategy proposes 12 demonstration plants (want many, in different conditions) by 2015: needed to develop/choose technologies, and drive down cost, if there is going to be significant deployment by 2030 - Meanwhile should make all plants ‘capture ready (post-combustion or oxy-fuel) It will require a floor for the price of carbon

40. Solar Potential Average flux reaching earth’s surface is 170 Wm -2, 220 Wm -2 at equator, 110 Wm -2 at 50 degrees north 170 Wm -2 on 0.5% of the world’s land surface (100% occupied!) would with 15% efficiency provide 19 TW Photovoltaics are readily available with 15% efficiency or more, and concentrated solar power can be significantly more efficient Photosynthesis: Natural: energy yields are vary from 30-80 GJ/hectare/year (wood) to 400- 500 GJ/hectare/year (sugar cane) 100 GJ/hectare/year corresponds to 0.3 Wm -2, or 0.2% of average solar flux at earth’s surface, so even sugar cane is only 1% efficient at producing energy. At 0.3 Wm -2, would need 15% of world’s land surface to give 10 TW Artificia l: exciting possibility of mimicking photosynthesis in an artificial catalytic system to produce hydrogen (to power fuel cells), with efficiency of possibly 10% (and no: wasted water, fertiliser, harvesting) – should be developed

41. Solar (non-bio) Photovoltaics (hydrogen storage?) Concentration (parabolic troughs, heliostats, towers) High T: → turbines (storage: molten salts, dissociation/synthesis of ammonia, phase transitions in novel materials…) → ‘thermal cracking’ of water to hydrogen Challenges: new materials, fatigue… Thermal (low T): hot water (even in UK not stupid), cooling

42. Projected cost of photovoltaic solar power? $1/W p AC → 2.6 €-cents/kWhr in California (4.7 in Germany) - requires cost ~ cost of glass!

43. Solar Parabolic Trough Mirrors + receivers + conventional (super) heated steam turbine. Generally solar/fossil hybrids (can be ISCC). Considerable experience (a few with heat storage). Individual systems < 80 MW.

44. Heliostats Heats molten salt to 565C (buffer) → steam, or air or water. May (initially at least) be hybrid (including ISCC). Pilots built, but none yet on commercial scale: 50 – 200 MW. Dish/Stirling engine Up to 750C, 20 MPa. High efficiency (30% achieved. Small (< 25 kW each). Modular. May be hybrid. Needs mass production to drive down cost (can → Brayton turbine)

45. Nuclear Power Recent performance impressive – construction ~ (?) on time and (?) budget, excellent safety record, cost looks OK New generation of reactors (AP1000, EPR) – fewer components, passive safety, less waste, lower down time and lower costs Constraints on expansion - snail’s pace of planning permission (in UK +…) - concerns about safety - concerns about waste - proliferation risk - availability of cheap uranium

46. Problems and limitations Safety – biggest problem is perception (arguable that Didcot power station has killed more people than Chernobyl) Waste – problem is volume for long term disposal US figures: Existing fleet will → 100,000 tonnes (c/f legislated capacity of Yucca mountain = 70,000 tonnes) If fleet expanded by 1.8% p.a. → 1,400,000 tonnes at end of century Proliferation – need to limited availability of enrichment technology, and burn or contaminate fissile products

47. Uranium Resources. US DoE Data/Projections: Assuming 1.8% p.a. growth of world’s nuclear use Unless there is much more than thought, or we can use unconventional uranium, not long to start FBRs Will need to use thorium and/or fast breeders in ~ 50 years Need to develop now

48. Different Fuel Cycles Goals - reduce waste needing long-term disposal (destroy: [99.5+%?] of transuranics, and heat producing fission products [caesium, strontium]) - burn or ‘contaminate’ weapons-usable material - get more energy/(kg of uranium) Options (some gains possible from improved burn-up in once through reactors; as in all thermal power plants, higher temperature → more energy/kg of fuel) Recycle in conventional reactors – can get ~2 times energy/kg + reduce waste volume by factor 2 or 3 (note: increase proliferation risk + short-term risk from waste streams) Fast breeders [Mixed economy: conventional reactors + burn waste by having some FBRs or accelerator based waste burners]

49. Plutonium Fast Breeders In natural uranium, only 235 U (0.7%) is fissile, but can make fissile Plutonium from the other 99.3% 238 U + n → 239 Np → 239 Pu fertile fissile  order 60 times more energy/kg of U  more expensive (and not quite so safe + large plutonium inventory), but far less waste → storage Potential problem slow ramp up* (1 reactor→ 2 takes ~ 10 years) * Based on figures from Paul Howarth: 1 GW e FBR needs stockpile of ~ 30 tonnes Pu to operate ~ 12 years [30 tonnes of Pu is output of a 1 GW e LWR for ~ 140 years] After 12 years → 30t Pu to refuel + 30t Pu to start another

50. Thorium Thorium is more abundant than Uranium* and 100% can be burned (generating less waste than Uranium), using 232 Th + n → 233 Th → 232 Pa → U 233 fertile fissile Thermal neutrons OK, but then to avoid poisoning need continuous reprocessing → molten salts * accessible 232 Th resource seems (??) to be over 4 Mt, vs. 0.1 Mt for 235 U (if total accessible U resource is 16 Mt) Need Pu or highly enriched U core (→ large number of neutrons) or neutrons from accelerator driven spallation source* in order to get started Relatively rapid ramp up but long doubling time (?) * avoids having a near critical system, but economics suggest AD system’s best potential is for actinide burning

51. FUSION D + T → He + N + 17.6 MeV Tritium from N + Li → He + T Tritium from N + Li → He + T So the raw fuels are lithium (→ T), which is very abundant, and water (→ D) The lithium in one laptop battery + half a bath of water would produce 200,000 kW-hours of electricity = EU per-capita electricity production for 30 years without any CO 2 This ( + fact that costs do not look unreasonable: might be able to compete with fast breeders?) is sufficient reason to develop fusion as a matter of urgency Now focus on magnetic confinement (inertial fusion should also be pursued, but is a generation behind, and faces additional challenges)

52. FUSION (magnetic confinement) D + T → He + N + 17.6 MeV Challenges: 1) Heat D-T plasma to over 100 M 0 C = 10xtemperature of core of sun, while keeping it from touching the walls This has been done using a ‘magnetic bottle’ (tokamak) This has been done using a ‘magnetic bottle’ (tokamak) The Joint European Torus (JET) at Culham in the UK has produced 16 MW of fusion power 2) Make a robust container (able to withstand huge neutron bombardment ~ 2MW/m 2 ) 3) Ensure reliability of very complex systems

53. FUSION (magnetic confinement- cont) Attractions: unlimited fuel, no CO 2 or air pollution, intrinsic safety, no radioactive ash or long-lived nuclear waste, cost will be reasonable if we can get it to work reliably Disadvantages: not yet available, walls gets activated (but half lives ~ 10 years; could recycle after 100 years) Next Steps: Construct a power station sized device (→ at least 10 times more energy than input) – this has just been agreed: it is called ITER and is being built by EU, Japan, Russia, USA, China, S Korea, India in Provence Build a Fusion Materials Irradiation Facility (IFMIF) and develop fusion technologies IF these steps are taken in parallel, then - given adequate funding, and no major adverse surprises - a prototype fusion power station could be putting power into the grid within 30 years

54. Could what is available add up to a solution? but only with Known technologies could in principle meet needs with constrained CO 2 until the middle of the century, but only with - technology development, e.g. for carbon capture and storage: essential - measures to increase efficiency (cost is a big driver, but need strong regulation also) - all known low carbon sources pushed to the limit After fossil fuels depleted, must continue to use everything available. But the only major potential contributors are - Solar which must be developed - Nuclear fission → fast breeders - Fusion: which must be developed

56. Cost Effectiveness of Modest CO 2 Saving in IEA’s 2006 Alternative Scenario (‘only’ +30% CO 2 in 2030: +50% in Reference Scenario) Supply side investment saved: $3.0 trillion* to 2030 *out of over $29 trillion in reference scenario, which won’t necessarily be available Additional demand side investment*: $2.4 trillion to 2030 *by consumers, who cumulatively save $8.1 trillion in power bills – so investment very cost effective (even with an enormous discount rate as pay back times ~ 3 years in OECD/1.5 years developing countries) Gains biggest in developing world ‘low hanging fruit’; demand side work cheaper but implementation requires many individual investment decisions, by people - such as landlords, developers who won’t be paying the power bills - in the developing world, without access to capital - in developed world, without a great interest in individually small savings

57. Final Conclusions ■ Huge increase in energy use expected; large increase needed to lift world out of poverty ■ Challenge of meeting demand in an environmentally responsible manner is enormous. No silver bullet - need a portfolio approach particularly:CCS increased efficiency solar nuclear fusion ■ Need all sensible measures: more wind, hydro, biofuels, marine, and particularly: CCS (essential to reduce climate change) and increased efficiency, and in longer term: more solar and nuclear, and fusion [we hope] ■ Huge R&D agenda ■ Need fiscal incentives, regulation, carbon price, more R&D, political will (globally) The time for action is now