1. New Way Chemistry for Hong Kong A-Level 3B 1 Overal equation: Nylon 6,6 6C

2. New Way Chemistry for Hong Kong A-Level 3B 2 Preparation of nylon-6,6 in the laboratory 35.3 Synthetic Polymers (SB p.171) Preparation of nylon-6,6 in the laboratory Reaction occurs at the boundary

3. New Way Chemistry for Hong Kong A-Level 3B 3 35.3 Synthetic Polymers (SB p.171) 2. Kevlar Kevlar is an aromatic polyamide The structure of Kevlar is similar to nylon-6,6

4. New Way Chemistry for Hong Kong A-Level 3B 4 35.3 Synthetic Polymers (SB p.171) 2. Kevlar The two monomers of Kevlar are benzene-1,4-dicarboxylic acid and 1,4-diaminobenzene water molecules are eliminated

5. New Way Chemistry for Hong Kong A-Level 3B 5 35.3 Synthetic Polymers (SB p.171) 2. Kevlar Part of a polymer chain of Kevlar is shown below: Polyamide : Polymer with repeating units held by amide linkages

6. New Way Chemistry for Hong Kong A-Level 3B 6 35.3 Synthetic Polymers (SB p.171) 2. Kevlar The repeating unit of Kevlar is:

7. New Way Chemistry for Hong Kong A-Level 3B 7 35.3 Synthetic Polymers (SB p.171) 2. Kevlar Kevlar is a very strong material  used for reinforcing car tyres Used to make ropes  20 times as strong as steel ropes of the same weight Used for making reinforced aircraft wings and bullet-proof vests

8. New Way Chemistry for Hong Kong A-Level 3B 8 35.3 Synthetic Polymers (SB p.171) 2. Kevlar The bullet-proof vest is made of Kevlar

9. New Way Chemistry for Hong Kong A-Level 3B 9 35.3 Synthetic Polymers (SB p.171) 2. Kevlar What is the main weakness of kevlar ? Kevlar undergoes alkaline hydrolysis

10. New Way Chemistry for Hong Kong A-Level 3B 10 35.3 Synthetic Polymers (SB p.172) 3. Dacron Dacron is the DuPont trade mark for the polyester Polyethylene terephthalate (PET, PETE, PETP) Sometimes called Terylene

11. New Way Chemistry for Hong Kong A-Level 3B 11 Poly(ethylene terephthalate) (PET) PET is a condensation polymer formed between a dioic acid and a diol. monomer 1: C O OH O HO C a dioic acid monomer 2: CH 2 OHHO a diol benzene-1,4-dioic acid ( 對苯二甲酸 ) terephthalic acid ethane-1,2-diol bifunctional

12. New Way Chemistry for Hong Kong A-Level 3B 12 terephthalic acid ethane-1,2-diol 250  C, H + catalyst Esterification (condensation) Ester linkage

13. New Way Chemistry for Hong Kong A-Level 3B 13 the ester molecule formed still has unreacted functional groups at both ends Repeated condensations (Polyester)

14. New Way Chemistry for Hong Kong A-Level 3B 14 Overal equation: Terylene (in UK) or Dacron (in USA) Terephthalateethylene

15. New Way Chemistry for Hong Kong A-Level 3B 15 PET Polymer: Repeating unit:

16. New Way Chemistry for Hong Kong A-Level 3B 16 Properties and uses  strong  tough  smooth  resistant to water and chemicals The ester linkages are polar.  Polymer chains are held together by strong dipole-dipole interaction.

17. New Way Chemistry for Hong Kong A-Level 3B 17 Clothes made of 100% polyester. resistant to wrinkle can be dried easily

18. New Way Chemistry for Hong Kong A-Level 3B 18 Clothes made of 100% cotton. soft, comfortable, absorb sweat quickly

19. New Way Chemistry for Hong Kong A-Level 3B 19 Clothes made of 35% polyester and 65% cotton. Strong and comfortable to wear

20. New Way Chemistry for Hong Kong A-Level 3B 20 Properties and uses  resistant to chemicals  Non-toxic  easily washed PET is commonly used for making food containers and bottles.

21. New Way Chemistry for Hong Kong A-Level 3B 21 4. Urea-methanal Urea-methanal is a polyamide, which is a condensation polymer formed from the following two monomers: methana l urea bifunctionalbifunctional?

22. New Way Chemistry for Hong Kong A-Level 3B 22 −H2O−H2O repeated condensations Stage One : repeated condensations Conc. H 2 SO 4 as catalyst

23. New Way Chemistry for Hong Kong A-Level 3B 23 −H2O−H2O further condensations Stage Two : Formation of cross-links Cross-links Strong covalent bonds

24. New Way Chemistry for Hong Kong A-Level 3B 24 −H2O−H2O further condensations Stage Two : Formation of cross-links For cross-links to form, one of the monomers must have more than two reactive sites

25. New Way Chemistry for Hong Kong A-Level 3B 25 For cross-links to form, one of the monomers must have more than two reactive sites urea

26. New Way Chemistry for Hong Kong A-Level 3B 26 −H2O−H2O further condensations Stage Two : Formation of cross-links hard, rigid three-dimensional giant network Strong covalent bonds

27. New Way Chemistry for Hong Kong A-Level 3B 27 4. Urea-methanal Polymer: Repeating unit:

28. New Way Chemistry for Hong Kong A-Level 3B 28 conc. sulphuric acid solution of urea and methanal white viscous liquid stir white solid of urea- methanal after further stirring Laboratory preparation of urea-methanal.

29. New Way Chemistry for Hong Kong A-Level 3B 29 Properties  white in colour  hard and rigid  excellent electrical and heat insulator  resistant to chemical attack  insoluble in any solvent  upon heating, it does not change in shape or melt  under strong heating, it decomposes

30. New Way Chemistry for Hong Kong A-Level 3B 30 Light coloured electrical switches, plugs, sockets and casings for electrical appliances Uses

31. New Way Chemistry for Hong Kong A-Level 3B 31 Ashtrays and handles of frying pans Uses

32. New Way Chemistry for Hong Kong A-Level 3B 32 35.3 Synthetic Polymers (SB p.175) 4. Urea-methanal Urea-methanal is a thermosetting plastic  once set hard cannot be softened or melted again by heating

33. New Way Chemistry for Hong Kong A-Level 3B 33 Production of plastic products b)stabilizers — to give stability to the plastics as well as to the colour dyes and pigments; a)dyes — to give colour; Two steps are involved 1.Addition of additives c)plasticizers — to make the plastics more flexible; d)fillers — to make the products stronger and opaque.

34. New Way Chemistry for Hong Kong A-Level 3B 34 Production of plastic products Two steps are involved 2.Moulding a)Injection moulding b)Compression moulding c)Blow moulding

35. New Way Chemistry for Hong Kong A-Level 3B 35  Almost all thermoplastics are moulded by injection moulding. Injection moulding ( 注射成型 )

36. New Way Chemistry for Hong Kong A-Level 3B 36 + dye / stabilizer / plasticizer / filler Injection moulding ( 注射成型 )

37. New Way Chemistry for Hong Kong A-Level 3B 37  The material is melted as the plunger moves backwards.  The melted plastic is then forced into the mould as the plunger moves forwards.  The plastic sets in the shape of the mould as it cools. Injection moulding ( 注射成型 )

38. New Way Chemistry for Hong Kong A-Level 3B 38 A mark can be found at the bottom Injection moulding ( 注射成型 )

39. New Way Chemistry for Hong Kong A-Level 3B 39  Compression moulding is used to mould thermosetting plastics. Compression moulding( 壓縮成型 )

40. New Way Chemistry for Hong Kong A-Level 3B 40  As the powder softens, lower the upper half of the mould to compress the melted plastic into shape.  Cross-linking occurs on further heating and the plastic sets. Compression moulding( 壓縮成型 )

41. New Way Chemistry for Hong Kong A-Level 3B 41  Suitable for making hollow containers. Blow moulding Molten plastic tube

42. New Way Chemistry for Hong Kong A-Level 3B 42 35.3 Synthetic Polymers (SB p.170) There is another kind of nylon called nylon-6. It is similar to nylon-6,6 except that it has one monomer only. What is the structure of the monomer of nylon-6? http://en.wikipedia.org/wiki/Nylon_6 caprolactam

43. New Way Chemistry for Hong Kong A-Level 3B 43 35.3 Synthetic Polymers (SB p.170) There is another kind of nylon called nylon-6. It is similar to nylon-6,6 except that it has one monomer only. What is the structure of the monomer of nylon-6?

44. New Way Chemistry for Hong Kong A-Level 3B 44 35.3 Synthetic Polymers (SB p.170) Back N-H and C=O groups point in opposite directions to allow formation of H-bonds with polymer chains from both sides Nylon 6 Nylon 6,6

45. New Way Chemistry for Hong Kong A-Level 3B 45 35.3 Synthetic Polymers (SB p.173) Why would a hole appear when a dilute alkali is spilt on a fabric made of polyester? Polyesters undergoes alkaline hydrolysis leaving a hole on the fabric. Back