1. 1 Round 6 Technology CAD / CAM

2. 2 Passport Photo Frame Drawing Area Draw / Edit Toolbox Drawing Aids Toolbox Position, Size and Direction Information Material Size

3. 3 Passport Photo Frame 1. Click Grid Lock Set to 5 x 5 2. Click shapes 3. Click Corner 4. Drag to correct size 50 mm x 200 mm 5. Correct size shown here

4. 4 1. Click Grid Lock Off 2. Double Click Attach 3.Click Mid point of Line / arc settings 4. OK these settings 5. Click Lines

5. 5 1. Make sure square pointer crosses line near centre and click 2. Repeat on opposite side

6. 6 Passport Photo Frame 1. Click and hold down contour 2. Move to contour parallel then release

7. 7 Passport Photo Frame 1. Change contour to 60mm 2. Click OK

8. 8 1.Locate just above line and click 2. Line appears 3. Click and hold down contour 4. Move to closed contour then release

9. 9 Passport Photo Frame 1. Change contour to 10 mm 2. Click OK

10. 10 1. Locate just above line and click 2. Contour appears

11. 11 1. Click and hold down Arcs 2. Select filleted arc

12. 12 Passport Photo Frame 1. Set Radius to 5mm 2. Click OK

13. 13 Passport Photo Frame 1. Click first line (turns pink) 2. Click adjoining line to create rounded corner 3. Repeat on other corners

14. 14 Passport Photo Frame Delete Centre line

15. 15 Passport Photo Frame 1. Click Text 2. Click start point 3. Type character in Text Entry Box Click setting

16. 16 1. Choose a font 2. Change size to 40.00mm 3. Click OK

17. 17 1. Click OK

18. 18 1. Click Select 2. Click to Select Shape 3. Click yellow square in centre 4. Drag to fit inside frame then click to position

19. 19 1. Click Fill 2. Select No fill 3. Click OK

20. 20 1. Click Explode 2. One level only 3. Click Continue Must be selected

21. 21 1. Click Zoom in 2. Click and drag box around shape

22. 22 1. Click and hold DEL ANY 2. Select Delete part

23. 23 1. Locate and click to remove unwanted lines to leave just an outline If you delete the wrong line click UNDO LAST to replace it

24. 24 1. Click and hold down IN 2. Select media

25. 25 Radius corners as before

26. 26 1. Click Col 2. Click the red square in the Custom colours 3. Click OK

27. 27 1. Select Contour 2. Set Contour to 1.00mm 3. Click OK

28. 28 1. Locate inside tool path first 2. Locate outside tool path last

29. 29 1. Zoom in to view window 2. Select black line

30. 30 1. Select Col 2. Click on Blue Box in Custom Colours 3. Click OK

31. 31 Click media to view all