Presentation is loading. Please wait.

Presentation is loading. Please wait.

Reading Topographic Maps

Similar presentations


Presentation on theme: "Reading Topographic Maps"— Presentation transcript:

1 Reading Topographic Maps

2 TEKS 8.2 (E) construct graphs, tables, maps, and charts using tools including computers to organize, examine, and evaluate data.

3 Learning Objectives Identify structures on a topographic map.
Use a topographic map to describe the elevation of landforms.

4 What is a topographic map?

5 A topographic map is a special kind of map that provides 3 dimensional information in a drawing. 
Natural structures like mountains, valleys, plains, lakes, and rivers are shown on a topographic map. You will also find manmade structures like roads, boundaries, radio towers, and major buildings Topographic maps are used by engineers as they look for coal, oil, and gas. They can be used to plan residential and commercial . And they are used by the military and for recreational purposes like hiking and camping.

6 How is elevation used in a topographic map?

7 Sanger is 669 feet above sea level. The city of New Orleans is 6
Sanger is 669 feet above sea level. The city of New Orleans is 6.5 feet below sea level. What does sea level mean?

8 Notice the two high points on the island
Notice the two high points on the island. What is the elevation of the two high points?

9 What is the elevation of Point A?
Point A sits right on the 0 ft contour line.  Since all points on this line have an elevation of 0 ft, the elevation of point A is zero.

10 What is the elevation of Point B?
Point B sits right on the 10 ft contour line.  Since all points on this line have an elevation of 10 ft, the elevation of point B is 10 ft.

11 What is the elevation of Point C?
Point C does not sit directly on a contour line so we can not determine the elevation precisely.  We do know that point C is between the 10ft and 20 ft contour lines so its elevation must be greater than 10 ft and less than 20 ft.  Because point C is midway between these contour lines we can estimate the elevation is about 15 feet (Note this assumes that the slope is constant between the two contour lines, this may not be the case). 

12 What is the elevation of Point D?
We are even less sure of the elevation of point D than point C.  Point D is inside the 20 ft. contour line indicating its elevation is above 20 ft.  Its elevation has to be less than 30 ft. because there is no 30 ft. contour line shown.  But how much less?  There is no way to tell.  The elevation could be 21 ft, or it could be 29 ft.  There is now way to tell from the map. 

13 What is the elevation of Point E?
Just as with point C above, we need to estimate the elevation of point E somewhere between the 0 ft and 10 ft contour lines it lies in between.  Because this point is closer to the 10 ft line than the 0 ft. line we estimate an elevation closer to 10.  In this case 8 ft. seems reasonable.  Again this estimation makes the assumption of a constant slope between these two contour lines.

14 Notice how the contour lines are used to show how gentle or steep the slope is.

15 Topographic maps also identify natural structures and structures made by man.

16 ENGAGE Use steroscopes to examine elevation of landforms.

17 Explore Name structures and provide information using the map.

18 Explain 1. What are contour maps used for?
What information is found on a contour map? How can you determine how steep a gradient is?

19 Elaborate Create 3-D models of volcanoes using using contour maps and cardboard.

20 Evaluate

21 Question 1: Name the highest elevation shown for this volcano.

22 Question 2: What is the deepest point at Silver Lake in NY state?

23 Explain how contour lines are used to show elevation.
Describe at least four natural or man-made structures that can be shown on a topographic map.


Download ppt "Reading Topographic Maps"

Similar presentations


Ads by Google