Presentation is loading. Please wait.

Presentation is loading. Please wait.

Transport phenomena in chemical processes part II Michał Araszkiewicz PhD.

Similar presentations


Presentation on theme: "Transport phenomena in chemical processes part II Michał Araszkiewicz PhD."— Presentation transcript:

1 Transport phenomena in chemical processes part II Michał Araszkiewicz PhD

2 What the transport means? In casual situation, when we say transport, we think about movement of one thing from one place to the different one.

3 In chemical engineering nomenclature we understand transport as a process of transfering: Liquid Gas Solids For example: TankReactor

4 The transport processes can be divided into two main groups:

5 A Transport A Transport process without chemical reaction Substance A remains intact during the transport process

6 Transport process with chemical reaction A Transport + reaction B Substance A undergo the chemical reaction during the transport process and become substance B at the end

7 And that kind of transport process is no longer in our field of interest.

8 The transport definition can not be limited to the mentioned before mechanical or even chemical transfer processes. In this course I would like to focus on a more complicated situation, which is not only limited to the simply material transfer during chemical processes. We will discuss the transport phenomena that can be connected or take place along the processes mentioned before.

9 So, we have to clearly separate the three kinds of processes: – Mechanical transport – Chemical reaction – Mass, heat and momentum transport ProcessesMechanical Chemical reaction Mass, Heat, Momentum

10 In order to complicate the situation all mentioned before processes can take place together. In such case the analysis of the process course, balance and efficiency becomes more difficult and requires more effort.

11 We will: State the definition of each of these processes Present the obvious and more mysterious driving forces for each case. Present the most important rudiments of each of them Look at the boundary and initial conditions Present the main governing equations of these three processes.

12 So, its time for some very general definitions:

13 Momentum transfer

14 Heat transfer Heat transfer is about transferring the energy that can be manifested by increasing or decreasing material temperature. The most common driving force of heat transfer is temperature gradient within the material.

15 Mass transfer The mass transfer is concerned with the transport of chemical particles from one place (where their concentration is high) to another one (with lower concentration). That process is also very important, when the two different compounds react together (when the chemical reaction between them takes place). The reaction rate depends on the quality of contact between two (or more ) reagents in that case.

16 Processes Chemical engineering is kind of science about physical and chemical phenomena that take place in chemical apparatus. These phenomena (which sometimes run at the same time) are producing processes. Finally all is about of conversion of substrates into products. Phenomena Physical Chemical Process

17 Processes The number of processes are linked in one exemplary course of production. PhenomenaProcessProduction

18 Substrate 1 Substrate 2 Chemical reaction Preparing /division of products Main product By - products preparation Example of production scheme

19 And now for something completely different we will take a closer look at the processes in chemical engineering:

20 Processes in chemical engineering Basic processes Unit operations Processes with chemical reaction

21 Basic processes Momentum transfer SteadyUnsteady Heat transfer SteadyUnsteady Mass transfer SteadyUnsteady

22 Momentum transfer movement of fluids in: one phase system multi phase system movement of the particles in force field

23 Heat transfer ConductionConvectionRadiation

24

25 Unit operations Transfer of materials Temperature and phase changes of materials Shape changes of solid Separation SolidsLiquidsGases Mixing SolidsLiquidsGases

26 The all three basic processes (momentum, heat and mass tranfer) can be present in the unit operations. Acording to the dominant basic process the unit operations can be divided into various types:

27

28

29

30

31

32 Heat transfer ConductionConvectionRadiation

33 Conduction Energy transfer by conduction can take place in two ways. First one is connected with molecule interaction, where molecules with higher energy levels are transferring energy to the molecules with lower energy level. That kind of mechanism is common for situations where the temperature gradient exists and take place in solids, liquids and gases.

34 Conduction Second mechanism of conduction heat transfer is connected with free electrons movement. That kind of phenomena take place mostly in pure –metallic solids. The concentration of free electrons varies considerably for alloys and becomes very low for non metallic solids. That is the reason that metallic solids are mostly so good heat conductors.

35 Convection Convection is a kind of heat transfer that involves the energy exchange between a surface and adjacent fluid. The convection can be forced – where a fluid is made to flow past a solid surface by an external force.

36 Convection Free/natural convection take place when fluid with significant temperature placed next to the solid boundary causes circulation in order to the differences in fluid density due to the temperature gradients within the fluid volume.

37 Radiation The radiation mechanism is different to the two previously mentioned. In that case no physical medium is required for its propagation. The most efficient radiation heat transfer takes place in case of existing vacuum between two solids.

38 Mass transfer Diffusion Molecular diffusion Convective mass transfer

39 Mass transfer Mass transfer can take place by random molecular movement in fluids or can be connected with moleculer transport from solid surface into the moving fluid, when its dynamics depends on the fluid flow characteristic. That two kinds of mass transfer are very similar to the heat transfer mechanisms: conduction and convection respectively.

40 Molecular diffusion There is a phenomemon that in closed system with one or more compounds where the concentration vary there is a natural tendency to level the compound concentration within the system.

41 Convective mass transfer Convective mass transfer takes place in situation when: Fluid moves near the solid surface and mass transfer takes place between them Two immiscible fluids separated by a mobile interface (kind of contractor) The mass transfer always goes with concentration gradient from higher to lower concentration. Convective mass transfer depends on both transport properties and the fluid flow characteristic.

42 To be continued… Thank you for today.


Download ppt "Transport phenomena in chemical processes part II Michał Araszkiewicz PhD."

Similar presentations


Ads by Google